A Fast CCD Measurement Method Used in Rendezvous and Docking

AN Kai; MA Jia-guang

doi:10.3969/j.issn.1003-501x.2011.06.001

Journals >Opto-Electronic Engineering >Volume 38 >Issue 6 >Page 1 > Article

Opto-Electronic Engineering
Vol. 38, Issue 6, 1 (2011)

A Fast CCD Measurement Method Used in Rendezvous and Docking

AN Kai^1、* and MA Jia-guang²

Author Affiliations

¹[in Chinese]

²[in Chinese]

show less

DOI: 10.3969/j.issn.1003-501x.2011.06.001 Cite this Article

AN Kai, MA Jia-guang. A Fast CCD Measurement Method Used in Rendezvous and Docking[J]. Opto-Electronic Engineering, 2011, 38(6): 1 Copy Citation Text

show less

References

[1] AN Kai, HAN Ai-li, SONG Li-ding. A New Autonomous Navigation Technique-The Vision System with Single Camera [J]. Laser & Infrared, 2005, 35(12): 987-989.

[2] AN Kai, WANG Hong-man, REN Ge, et al. A New Angle-measurement Algorithm of the Detector with Four Quadrants [J]. Laser & Infrared, 2001, 31(6): 328-329.

[3] AN Kai, MA Jia-guang, FU Cheng-yu. A Fast Algorithm for Synthesis of the Moving Target Position [J]. Opto-Electronic Engineering, 2001, 28(4): 5-8.

[4] AN Kai, MA Jia-guang, FU Cheng-yu. Forecast Model of Moving Target's Position [J]. Systems Engineering And Electronics, 2001, 23(12): 4-7.

[9] AN Kai, MA Jia-guang. Attack Direction of Laser Based on the CCD Detection [J]. Opto-Electronic Engineering, 2011, 38(5): 1-4.

[10] AN Kai, MA Jia-guang. Solution System of Minimum-magnitude Equation about the Screw of a Rigid-body Motion of Manipulator [J]. Opto-Electronic Engineering, 2010, 37(7): 8-11.