Effect of Microstructural Anisotropy on Corrosion Resistance of 316L Stainless Steel Prepared by Additive Manufacturing

Zhijun Zheng; Lingyan Mao; Zhihao Dong

doi:10.3788/CJL220629

[1] Lu B H, Li D C. Development of the additive manufacturing (3D printing) technology[J]. Machine Building & Automation, 42, 1-4(2013).

[2] Greco S, Gutzeit K, Hotz H et al. Selective laser melting (SLM) of AISI 316L: impact of laser power, layer thickness, and hatch spacing on roughness, density, and microhardness at constant input energy density[J]. The International Journal of Advanced Manufacturing Technology, 108, 1551-1562(2020).

[3] Li S C, Mo B, Xiao G et al. Microstructure characteristics and their influence factors during laser additive manufacturing of metal materials[J]. Laser & Optoelectronics Progress, 58, 0100007(2021).

[4] Kong D C, Dong C F, Ni X Q et al. Corrosion of metallic materials fabricated by selective laser melting[J]. Npj Materials Degradation, 3, 24(2019).

[5] Zhou B G, Xu P W, Li W et al. Microstructure and anisotropy of the mechanical properties of 316L stainless steel fabricated by selective laser melting[J]. Metals, 11, 775(2021).

[6] Ishimoto T, Wu S Q, Ito Y et al. Crystallographic orientation control of 316L austenitic stainless steel via selective laser melting[J]. ISIJ International, 60, 1758-1764(2020).

[7] Rezaei A, Rezaeian A, Kermanpur A et al. Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test[J]. Materials Characterization, 162, 110200(2020).

[8] Zhang A F, Zhang J Z, Zhang X X et al. Research progress in tissue regulation and anisotropy of high-performance titanium alloy by laser additive manufacturing[J]. Journal of Netshape Forming Engineering, 11, 1-8(2019).

[9] Li Q, Wang G Q, Luo Z W et al. Inhomogeneity of microstructures and mechanical properties of 2219 aluminum alloy by WAAM[J]. Rare Metal Materials and Engineering, 49, 3969-3976(2020).

[10] Deev A A, Kuznetcov P A, Petrov S N. Anisotropy of mechanical properties and its correlation with the structure of the stainless steel 316L produced by the SLM method[J]. Physics Procedia, 83, 789-796(2016).

[11] Du J J, Jiang H T, Bu X Z et al. Research on process of GH4099 superalloy wire and arc additive manufacturing[J]. New Technology & New Process, 18-22(2020).

[12] Tang P J, Fang L J, Yang B et al. Microstructure and properties of selective laser melting AlSi7MgTi alloy[J]. Journal of Materials Engineering, 48, 116-123(2020).

[13] Sander G, Babu A P, Gao X et al. On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting[J]. Corrosion Science, 179, 109149(2021).

[14] Revilla R I, Wouters B, Andreatta F et al. EIS comparative study and critical Equivalent Electrical Circuit (EEC) analysis of the native oxide layer of additive manufactured and wrought 316L stainless steel[J]. Corrosion Science, 167, 108480(2020).

[15] Wang B W, Sun M, Li B B et al. Anisotropic response of CoCrFeMnNi high-entropy alloy fabricated by selective laser melting[J]. Materials, 13, 5687(2020).

[16] Jiang Q T, Ma X M, Zhang K et al. Anisotropy of the crystallographic orientation and corrosion performance of high-strength AZ80 Mg alloy[J]. Journal of Magnesium and Alloys, 3, 309-314(2015).

[17] Yakout M, Elbestawi M A, Veldhuis S C. Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L[J]. Journal of Materials Processing Technology, 266, 397-420(2019).

[18] Fan P, Pan J T, Ge Y M et al. Finite element analysis of residual stress in TC4/TC11 titanium alloy gradient material produced by laser additive manufacturing[J]. Chinese Journal of Lasers, 48, 1802012(2021).

[19] Dong Z H, Zheng Z J, Peng L. Effect of heat treatment on anisotropic microstructure of additive manufacturing 316L stainless steel[J]. Heat Treatment of Metals, 46, 45-52(2021).

[20] Pham M S, Dovgyy B, Hooper P A. Twinning induced plasticity in austenitic stainless steel 316L made by additive manufacturing[J]. Materials Science and Engineering: A, 704, 102-111(2017).

[21] Qin W T, Yang Y Q, Weng C W et al. Comparative forming size and mechanical properties of 316L stainless steel fabricated using laser/plasma arc directed energy deposition[J]. Chinese Journal of Lasers, 48, 2202006(2021).

[22] Chao Q, Cruz V, Thomas S et al. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel[J]. Scripta Materialia, 141, 94-98(2017).

[23] Ralston K D, Birbilis N, Davies C H J. Revealing the relationship between grain size and corrosion rate of metals[J]. Scripta Materialia, 63, 1201-1204(2010).

[24] Dong S Q, Chen X, la Plante E C et al. Elucidating the grain-orientation dependent corrosion rates of austenitic stainless steels[J]. Materials & Design, 191, 108583(2020).

[25] Yue X Q, Zhang L, Hua Y et al. Revealing the superior corrosion protection of the passive film on selective laser melted 316L SS in a phosphate-buffered saline solution[J]. Applied Surface Science, 529, 147170(2020).

[26] Zheng Z J, Trinchi A, Meng X B et al. Effect of bimodal microstructure on electrochemical corrosion behavior of 304 stainless steel in 0.5 M H2SO4 solution[J]. Science of Advanced Materials, 11, 1275-1284(2019).