[1] B DUNN, H KAMATH, J M TARASCON. Electrical energy storage for the grid: a battery of choices. Science, 334, 928(2011).

[2] P CANEPA, G S GAUTAM, D C HANNAH et al. Odyssey of multivalent cathode materials: open questions and future challenges. Chemical Reviews, 117, 4287(2017).

[3] T Q HE, X Y KANG, F J WANG et al. Capacitive contribution matters in facilitating high power battery materials toward fast- charging alkali metal ion batteries. Materials Science & Engineering R-Reports, 100737(2023).

[4] A N SINGH, M ISLAM, A MEENA et al. Unleashing the potential of sodium-ion batteries: current state and future directions for sustainable energy storage. Advanced Functional Materials, 33, 2304617(2023).

[5] H YANG, D WANG, Y L LIU et al. Improvement of cycle life for layered oxide cathodes in sodium-ion batteries. Energy & Environmental Science, 17, 1756(2024).

[6] X W PANG, B G AN, S M ZHENG et al. Cathode materials of metal-ion batteries for low-temperature applications. Journal of Alloys and Compounds, 165142(2022).

[7] J Q LI, Z X LIANG, Y Q JIN et al. A high-voltage cathode material with ultralong cycle performance for sodium-ion batteries. Small Methods, 8, 2301742(2024).

[8] S T XU, Y YANG, F TANG et al. Vanadium fluorophosphates: advanced cathode materials for next-generation secondary batteries. Materials Horizons, 10, 1901(2023).

[9] Y C ZHANG, X ZHOU, C YANG et al. Air-stable prussian white cathode materials for sodium-ion batteries enabled by ZnO surface modification. ACS Applied Materials & Interfaces, 16, 15649(2024).

[10] J E ZHOU, R C K REDDY, A ZHONG et al. Metal-organic framework-based materials for advanced sodium storage: development and anticipation. Advanced Materials, 36, 2312471(2024).

[11] Z H WU, Y X NI, S TAN et al. Realizing high capacity and zero strain in layered oxide cathodes via lithium dual-site substitution for sodium-ion batteries. Journal of the American Chemical Society, 145, 9596(2023).

[12] C DELMAS, C FOUASSIER, P HAGENMULLER. Structural classification and properties of the layered oxides. Physica B & C, 99, 81(1980).

[13] A MENDIBOURE, C DELMAS, P HAGENMULLER. Electrochemical intercalation and deintercalation of Na_xMnO₂ bronzes. Journal of Solid State Chemistry, 57, 323(1985).

[14] J BILLAUD, R J CLÉMENT, A R ARMSTRONG. β-NaMnO₂: a high-performance cathode for sodium-ion batteries. Journal of the American Chemical Society, 136, 17243(2014).

[15] R J CLÉMENT, D S MIDDLEMISS, I D SEYMOUR et al. Insights into the nature and evolution upon electrochemical cycling of planar defects in the β-NaMnO₂ Na-ion battery cathode: an NMR and first-principles density functional theory approach. Chemistry of Materials, 28, 8228(2016).

[16] Z Y GU, Y L HENG, J Z GUO et al. Nano self-assembly of fluorophosphate cathode induced by surface energy evolution towards high-rate and stable sodium-ion batteries. Nano Research, 16, 439(2023).

[17] Z X HUANG, X L ZHANG, X X ZHAO et al. Hollow Na_0.62K_0.05Mn_0.7Ni_0.2Co_0.1O₂ polyhedra with exposed stable {001} facets and K riveting for sodium-ion batteries. Science China- Materials, 66, 79(2023).

[18] Z X HUANG, X L ZHANG, X X ZHAO et al. Suppressing oxygen redox in layered oxide cathode of sodium-ion batteries with ribbon superstructure and solid-solution behavior. Journal of Materials Science & Technology, 9(2023).

[19] M SHISHKIN, S KUMAKURA, S SATO et al. Unraveling the role of doping in selective stabilization of NaMnO₂ polymorphs: combined theoretical and experimental study. Chemistry of Materials, 30, 1257(2018).

[20] L W JIANG, Y X LU, Y S WANG et al. A high-temperature β-phase NaMnO₂ stabilized by Cu doping and its Na storage properties. Chinese Physics Letters, 35, 048801(2018).

[21] H J WANG, X GAO, S ZHANG et al. High-entropy Na-deficient layered oxides for sodium-ion batteries. ACS Nano, 17, 12530(2023).

[22] G KRESSE, J FURTHMULLER. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Computational Materials Science, 6, 15(1996).

[23] J P PERDEW, K BURKE, M ERNZERHOF. Generalized gradient approximation made simple. Physical Review Letters, 77, 3865(1996).

[24] H J MONKHORST, J D PACK. Special points for brillouin-zone integrations. Physical Review B, 13, 5188(1976).

[25] K OKHOTNIKOV, T CHARPENTIER, S CADARS. Supercell program: a combinatorial structure-generation approach for the local- level modeling of atomic substitutions and partial occupancies in crystals. Journal of Cheminformatics, 17(2016).

[26] V L DERINGER, A L TCHOUGRÉEFF, R DRONSKOWSKI. Crystal orbital Hamilton population (COHP) analysis as projected from plane-wave basis sets. Journal of Physical Chemistry A, 115, 5461(2011).

[27] S MAINTZ, V L DERINGER, A L TCHOUGRÉEFF et al. LOBSTER: a tool to extract chemical bonding from plane-wave based DFT. Journal of Computational Chemistry, 37, 1030(2016).

[28] G HENKELMAN, A ARNALDSSON, H JÓNSSON. A fast and robust algorithm for Bader decomposition of charge density. Computational Materials Science, 36, 354(2006).

[29] E SANVILLE, S D KENNY, R SMITH et al. Improved grid-based algorithm for bader charge allocation. Journal of Computational Chemistry, 28, 899(2007).

[30] K MOMMA, F IZUMI. VESTA3 for three-dimensional visualization of crystal, volumetric and morphology data. Journal of Applied Crystallography, 1272(2011).

[31] T ZHANG, M REN, Y H HUANG et al. Negative lattice expansion in an O3-type transition-metal oxide cathode for highly stable sodium-ion batteries. Angewandte Chemie International Edition, 63, 202316949(2024).

[32] P VANAPHUTI, Z Y YAO, Y T LIU et al. Achieving high stability and performance in P2-type Mn-based layered oxides with tetravalent cations for sodium-ion batteries. Small, 18, 2201086(2022).

[33] J C LI, G Z ZHU, P LIANG et al. Analysis of Si, Cu, and their oxides by X-ray photoelectron spectroscopy. Journal of Chemical Education, 101, 1162(2024).

[34] A URBAN, D H SEO, G CEDER. Computational understanding of Li-ion batteries. npj Computational Materials, 16002(2016).

[35] Z H ZHANG, D H WU, X ZHANG et al. First-principles computational studies on layered Na₂Mn₃O₇ as a high-rate cathode material for sodium ion batteries. Journal of Materials Chemistry A, 6, 6107(2018).