Shijie Li, Chao Xu, Yuetian Huang, Shouyi Wang, Weiguo Liu. Processing technology of cutting ZnS crystal[J]. Infrared and Laser Engineering, 2020, 49(7): 20190567
- Infrared and Laser Engineering
- Vol. 49, Issue 7, 20190567 (2020)
Fig. 1. Schematic diagram of fly-cutting and its arc profile
Fig. 2. Schematic diagram of cutting and its spiral line process path
Fig. 3. Schematic diagram of diamond tool parameters
Fig. 4. Initial surface quality of ZnS crystal element
Fig. 5. Roughness test results of ZnS flat element processed by fly-cutting with different parameters of diamond tools
Fig. 6. Effect of spindle speed on surface roughness
Fig. 7. Effect of cutting depth on surface roughness
Fig. 8. Effect of feedrate on surface roughness
Fig. 9. Roughness test results with the optimal processing parameters of fly-cutting
Fig. 10. Analysis of the cutting parameters with single variable method
Fig. 11. Roughness test results with the optimal processing parameters of cutting
|
Table 1. Diamond tool of different parameters
Set citation alerts for the article
Please enter your email address
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20