Research Progress on Surface Passivation of Mercury Cadmium Telluride

Yong-xi DAI; Li-ming WU; Jiao-jiao QI; Shi-guang LIU

doi:10.3969/j.issn.1672-8785.2021.02.004

[1] Varsei J B, Benson J D, Jaime-Vasquez M, et al. Investigation of MCT Surface Films and Their Removal[J]. J Electron Master, 2006, 35(6): 1443-1448.

[2] Banerjee S, Su P Y, Dahal R, et al. Surface Passivation of MCT Using Low-Pressure Chemical Vapor Deposition of CdTe[J]. Journal of Electronic Materials, 2014, 43(8): 2624-2628.

[3] Bubulac L O, Tennant W E, Bajaj J, et al. Characterization of CdTe for MCT Surface Passivation[J]. Journal of Electronic Materials, 1995, 24(9): 1175-1182.

[4] Zhang J, Umanamembreno G A, Gu R J, et al. Investigation of ICPECVD Silicon Nitride Films for MCT Surface Passivation[J]. Journal of Electronic Materials, 2015, 44(9): 2990-3001.

[5] Catagnus P C, Baker C T. Passivation of Mercury Cadmium Telluride Semiconductor Surfaces by Anodic Oxidation: US3977018[P]. 1976-08-24.

[6] Makky W H, Siddiqui A. Grouth. Composition and Surface Structure of Hg1-xCdxTe Plasma Oxides[J]. Journal of Vacuum Science and Technology A, 1986, 4(6): 3169-3173.

[7] White A M. In of Surface-Properties on Minority Carrier Lifetime and Sheet Conductance in Semiconductors[J]. Journal of Physics D: Applied Physics, 1981, 14(1): L1-L3.

[8] Nemirovsky Y, Burstein L. Anodic Sulfide on Hg1-x-CdxTe[J]. Applied Physics Letter, 1984, 44(4): 443.

[9] Mainzer N, Weiss E, Laser D, Shaanan M. Effects of Anodic Fluroro-Oxide on the Thermal-Stability of Hg1-xCdxTe Photoconductive Arrays[J]. Journal of Vacuum Science and Technology A, 1989, 7(2): 460.

[10] Deng Y, Ying F, Cheng X G, et al. Vacuumbaking Effects on the I-V Characteristics of LWIR HgCdTe Photodiodes With Different Passivation[C]. SPIE, 2009, 7158: 715808.

[11] Sun T, Li Y, Chen X, et al. The Dark Curent Mechanism of MCT Photovoltaic Detector Passivated by Different Structure[C]. SPIE, 2005, 5640: 26-33.

[14] Zhang X C, Zheng G Z, Guo S L, et al. Interface Electrical Characteristics of Passivation Films on MCT[C]. SPIE, 1998, 3175: 31750H.

[15] Licausi N, Rao S, Bhat I. Low-Pressure Chemical Vapor Deposition of CdS and Atomic Layer Deposition of CdTe Films for MCT Surface Passivation[J]. Journal of Electronic Materials, 2011, 40(8): 1668-1673.

[16] Zhang J, Umana-membreno G A, Gu R, et al. Investigation of ICPECVD Silicon Nitride Films for MCT Surface Passivation[J]. Journal of Electronic Materials, 2015, 44(9): 2990-3001.

[17] Ovsyuk V N， Yartsev A V. Analysis of Voltage-capacitance Curve of MIS-structure Based on n-and p-MBE MCT[C]. SPIE, 2007, 6636: 663617.

[18] Voitsekhovskii A V, Nesmelov S N, Dzyadukh S M. Hysteresis Phenomena in MIS Structure Based on Graded-gap MBE MCT With a Two-layer Plasma-chemical Insulator SiO2/Si3N4[J]. Russian Physics Journal, 2015, 58: 540-551.

[19] Singh R, Gupta A K, Chhabra K C. Surface Passivation of Mercury-Cadmium-Telluride Infrared Detectors[J]. Defence Science Journal, 1991, 41(3): 205-239.

[20] Voitsekhovskii A V, Nesmelov S N, Dzyadukh S M, et al. Electrical Characterization of Insulator-semiconductor Systems Based on Graded Gap MBE MCT with Atomic Layer Deposited Al2O3 Films for Infrared Detector Passivation[J]. Vacuum, 2018, 158: 136-140.

[21] Fu R,Pattison J, Chen A, et al. Mercury Cadmium Telluride (MCT) Passivation by Advanced Thin-Conformal Al2O3 Films[C]. SPIE, 2012, 8353: 83532I.