Effect of Normalizing Temperature on Microstructures and Tensile Properties of Laser Three-Dimensional-Printed Titanium Alloy

Ruixin Ma; Guojian Xu; Zhanqi Liu; Fei Gao; Wei Wang; Yunhai Su

doi:10.3788/CJL201946.0702008

[1] Kiel-Jamrozik M, Jamrozik W, Witkowska I. The heat treatment influence on the structure and mechanical properties of Ti6Al4V alloy manufactured by SLM technology[M]. ∥Gzik M, Tkacz E, Paszenda Z, et al. Innovations in biomedical engineering. Cham: Springer, 319-327(2017).

[2] Zhao Z, Chen J, Guo S et al. Influence of α/β interface phase on the tensile properties of laser cladding deposited Ti-6Al-4V titanium alloy[J]. Journal of Materials Science & Technology, 33, 675-681(2017). http://www.cqvip.com/QK/84252X/201707/672937929.html

[3] Sun Y Y, Gulizia S, Fraser D et al. Layer additive production or manufacturing of thick sections of Ti-6Al-4V by selective electron beam melting (SEBM)[J]. JOM, 69, 1836-1843(2017). http://link.springer.com/10.1007/s11837-017-2462-z

[4] Li J, Lin X, Qian Y H et al. Study on microstructure and property of laser solid forming TC4 titanium alloy[J]. Chinese Journal of Lasers, 41, 1103010(2014).

[5] Xi M Z, Lü C, Wu Z H et al. Microstructures and mechanical properties of TC11 titanium alloy formed by laser rapid forming and its combination with consecutive point-mode forging[J]. Acta Metallurgica Sinica, 53, 1065-1074(2017).

[6] Du B R, Zhang X J, Guo S Q et al. Microstructure and mechanical properties of laser melting deposited GH4169 superalloy[J]. Journal of Meterials Engineering, 45, 27-32(2017).

[7] Liu Z Q, Xu G J, Ma R X et al. Properties TiAl alloy prepared by additive manufacturing with laser coaxial powder feeding[J]. Chinese Journal of Lasers, 46, 0302016(2019).

[8] Vrancken B, Thijs L, Kruth J P et al. Heat treatment of Ti6Al4V produced by Selective Laser Melting: microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 541, 177-185(2012). http://www.sciencedirect.com/science/article/pii/S0925838812011826

[9] Sercombe T, Jones N, Day R et al. Heat treatment of Ti-6Al-7Nb components produced by selective laser melting[J]. Rapid Prototyping Journal, 14, 300-304(2008). http://www.emeraldinsight.com/doi/full/10.1108/13552540810907974

[10] Yang G, Liu J P, Qin L Y et al. Study on microstructure and high cycle fatigue property of laser deposited TA15 titanium alloy[J]. Infrared and Laser Engineering, 47, 37-42(2018).

[11] Zhou Q J, Yan Z Y, Han X et al. Microstructure and mechanical properties of laser melting deposited TC11 titanium alloys[J]. Chinese Journal of Lasers, 45, 1102005(2018).

[12] Yang G, Ma Y, Wang C et al. Effects of additive repair on microstructure and mechanical properties of laser additive manufactured TC4 titanium[J]. Chinese Journal of Lasers, 45, 1202002(2018).

[13] Zhang T G, Sun R L, An T D et al. Comparative study on microstructure of single-pass and multitrack TC4 laser cladding layer on Ti811 surface[J]. Materials Review, 32, 1983-1987(2018).