[1] W JAMES C, S EDGAR A. Progress in structural materials for aerospace systems. Acta Materialia, 51, 5775-5799(2003).
[2] Y WAKU, T SAKUMA. Dislocation mechanism of deformation and strength of Al2O3-YAG single crystal composites at high temperatures above 1500 ℃. Journal of the European Ceramic Society, 20, 1453-1458(2000).
[3] Y PASTOR J, A MARTIN, J M MOLINA-ALDAREGUIA et al. Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics. Journal of the European Ceramic Society, 33, 2579-2586(2013).
[4] S OCHIAI, T UEDA, K SATO et al. Deformation and fracture behavior of an Al2O3/YAG composite from room temperature to 2023 K. Composites Science and Technology, 61, 2117-2128(2001).
[5] Y WAKU, N NAKAGAWA, T WAKAMOTO et al. A ductile ceramic eutectic composite with high strength at 1873 K. Nature, 389, 49-52(1997).
[6] J LLORCA, M ORERA V. Directionally solidified eutectic ceramic oxides. Progress in Materials Science, 51, 711-809(2006).
[7] X WANG, W ZHANG, J ZHONG Y et al. Introduction of low strain energy GdAlO3 grain boundaries into directionally solidified Al2O3/GdAlO3 eutectics. Acta Materialia, 221, 117355(2021).
[8] D MA W, J ZHANG, J SU H et al. Phase growth patterns for Al2O3/GdAlO3 eutectics over wide ranges of compositions and solidification rates. Journal of Materials Science & Technology, 65, 89-98(2021).
[9] J SU H, Y LIU, Q REN et al. Distribution control and formation mechanism of gas inclusions in directionally solidified Al2O3-Er3Al5O12-ZrO2 ternary eutectic ceramic by laser floating zone melting. Journal of Materials Science & Technology, 66, 21-27(2021).
[10] C SUN L, C ZHOU, F DU T et al. Directionally solidified Al2O3/Er3Al5O12 and Al2O3/Yb3Al5O12 eutectic ceramics prepared by optical floating zone melting. Journal of Inorganic Materials, 36, 652-658(2021).
[11] N NAKAGAWA, H OHSSUBO, A MITANI et al. High temperature strength and thermal stability for melt growth composite. Journal of the European Ceramic Society, 25, 1251-1257(2005).
[12] N NAKAGAWA, H OHSSUBO, Y WAKU et al. Thermal emission properties of Al2O3/Er3Al5O12 eutectic ceramics. Journal of the European Ceramic Society, 25, 1285-1291(2005).
[13] A OTSUKA, Y WAKU, R TANAKA. Corrosion of a unidirectionally solidified Al2O3/YAG eutectic composite in a combustion environment. Journal of the European Ceramic Society, 25, 1269-1274(2005).
[14] Y ZHANG F, P GAO P, H TAN et al. Tailoring grain morphology in Ti-6Al-3Mo through heterogeneous nucleation in directed energy deposition. Journal of Materials Science & Technology, 88, 132-142(2021).
[15] A CHAKRABORTY, R TANGESTANI, R BATMAZ et al. In-process failure analysis of thin-wall structures made by laser powder bed fusion additive manufacturing. Journal of Materials Science & Technology, 98, 233-243(2022).
[16] K KIM Y, C KIM M, A LEE K. 1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion. Journal of Materials Science & Technology, 97, 10-19(2022).
[17] L XING L, C ZHAO C, H CHEN et al. Microstructure of a Ti-50wt% Ta alloy produced via laser powder bed fusion. Acta Metallurgica Sinica, 33, 981-990(2020).
[18] M EBRAHIMNIA, J XIE Y, T CHI C. Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel. Acta Metallurgica Sinica, 33, 528-538(2020).
[19] F YU C, Y ZHONG, P ZHANG et al. Effect of build direction on fatigue performance of L-PBF 316L stainless steel. Acta Metallurgica Sinica, 33, 539-550(2020).
[20] X WANG, F LÜ, D SHEN L et al. Influence of island scanning strategy on microstructures and mechanical properties of direct laser-deposited Ti-6Al-4V structures. Acta Metallurgica Sinica, 32, 1173-1180(2019).
[21] L SHEN Z, J SU H, F LIU H et al. Research progress on laser additive manufacturing technology and its defect control for ultra-high temperature oxide ceramics. Acta Materiae Compositae Sinica, 38, 668-679(2021).
[22] D GU D, M ZHANG H, Y CHEN H et al. Laser additive manufacturing of high-performance metallic aerospace components. Chinese Journal of Lasers, 47, 32-55(2020).
[23] J SU H, C WEI K, W GUO et al. New development of laser rapid forming and its application in high performance materials processing. The Chinese Journal of Nonferrous Metals, 23, 1567-1574(2013).
[24] Y LAKHDAR, C TUCK, J BINNER et al. Additive manufacturing of advanced ceramic materials. Progress in Materials Science, 116, 100736(2021).
[25] W CHEN Z, Y LI Z, J LI J et al. 3D printing of ceramics: a review. Journal of the European Ceramic Society, 39, 661-687(2019).
[26] A TAMEZ M B, I TAHA. A review of additive manufacturing technologies and markets for thermosetting resins and their potential for carbon fiber integration. Additive Manufacturing, 37, 101748(2021).
[27] C SUN, Y WANG, D MCMURTREY M et al. Additive manufacturing for energy: a review. Applied Energy, 282, 116041(2021).
[28] D GU D, Y SHI X, R POPRAWE et al. Material-structure- performance integrated laser-metal additive manufacturing. Science, 372, 932-947(2021).
[29] J SU H, J ZHANG, L LIU et al. Rapid growth and formation mechanism of ultrafine structural oxide eutectic ceramics by laser direct forming. Applied Physics Letters, 99, 221913(2011).
[30] J WILKES, Y HAGEDORN, W MEINERS et al. Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting. Rapid Prototyping Journal, 19, 51-57(2013).
[31] Y NIU F, J WU D, Y MA G et al. Nanosized microstructure of Al2O3-ZrO2(Y2O3) eutectics fabricated by laser engineered net shaping. Scripta Materialia, 95, 39-41(2015).
[32] Y NIU F, J WU D, Y MA G et al. Rapid fabrication of eutectic ceramic structures by laser engineered net shaping. ISEM XVIII, 42, 91-95(2016).
[33] S YAN, J WU D, Y MA G et al. Formation mechanism and process optimization of nano Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS). Ceramics International, 43, 14742-14747(2017).
[34] Y MA G, S YAN, Y NIU F et al. Microstructure and mechanical properties of solid Al2O3-ZrO2 (Y2O3) eutectics prepared by laser engineered net shaping. Journal of Laser Applications, 29, 022305(2017).
[35] S YAN, J WU D, Y NIU F et al. Al2O3-ZrO2 eutectic ceramic via ultrasonic-assisted laser engineered net shaping. Ceramics International, 43, 15905-15910(2017).
[36] S YAN, J WU D, Y MA G et al. Nano-sized Al2O3-ZrO2 eutectic ceramic structures prepared by ultrasonic-assisted laser engineered net shaping. Materials Letters, 212, 8-11(2018).
[37] S YAN, J WU D, Y NIU F et al. Effect of ultrasonic power on forming quality of nano-sized Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS). Ceramics International, 44, 1120-1126(2018).
[38] J WU D, F LU, K ZHAO D et al. Effect of doping SiC particles on cracks and pores of Al2O3-ZrO2 eutectic ceramics fabricated by directed laser deposition. Journal of Materials Science, 54, 9321-9330(2019).
[39] J WU D, D SAN J, Y NIU F et al. Directed laser deposition of Al2O3-ZrO2 melt-grown composite ceramics with multiple composition ratios. Journal of Materials Science, 55, 6794-6809(2020).
[40] J WU D, D SAN J, Y NIU F et al. Effect and mechanism of ZrO2 doping on the cracking behavior of melt-grown Al2O3 ceramics prepared by directed laser deposition. International Journal of Applied Ceramic Technology, 17, 227-238(2020).
[41] J WU D, C LIU H, F LU et al. Al2O3-YAG eutectic ceramic prepared by laser additive manufacturing with water-cooled substrate. Ceramics International, 45, 4119-4122(2019).
[42] S YAN, J WU D, F HUANG Y et al. C fiber toughening Al2O3-ZrO2 eutectic via ultrasonic-assisted directed laser deposition. Materials Letters, 235, 228-231(2019).
[43] S YAN, F HUANG Y, K ZHAO D et al. 3D printing of nano- scale Al2O3-ZrO2 eutectic ceramic: principle analysis and process optimization of pores. Additive Manufacturing, 28, 120-126(2019).
[44] Z LI F, W ZHANG X, Y SUI C et al. Microstructure and mechanical properties of Al2O3-ZrO2 ceramic deposited by laser direct material deposition. Ceramics International, 44, 18960-18968(2018).
[45] Z LI F, W LIU Z, B LI et al. Pore formation model for direct laser deposition of Al2O3-ZrO2 ceramic. Journal of the European Ceramic Society, 42, 207-215(2022).
[46] Q FAN Z, T ZHAO Y, Y TAN Q et al. New insights into the growth mechanism of 3D-printed Al2O3-Y3Al5O12 binary eutectic composites. Scripta Materialia, 178, 274-280(2020).
[47] Q FAN Z, T ZHAO Y, Y TAN Q et al. Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping. Acta Materialia, 170, 24-37(2019).
[48] L BARTLETT J, X LI. An overview of residual stresses in metal powder bed fusion. Additive Manufacturing, 27, 131-149(2019).
[49] C FANG Z, L WU Z, G HUANG C et al. Review on residual stress in selective laser melting additive manufacturing of alloy parts. Optics and Laser Technology, 129, 106283(2020).
[50] R ACEVEDO, P SEDLAK, R KOLMAN et al. Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: state of the art review. Journal of Materials Research and Technology, 9, 9457-9477(2020).
[51] W CHEN, Y XU L, D HAN Y et al. Control of residual stress in metal additive manufacturing by low-temperature solid-state phase transformation: an experimental and numerical study. Additive Manufacturing, 42, 102016(2021).
[52] X SONG, S FEIH, W ZHAI et al. Advances in additive manufacturing process simulation: residual stresses and distortion predictions in complex metallic components. Materials & Design, 193, 108779(2020).
[53] K HA, T KIM, Y BAEK G et al. Numerical study of the effect of progressive solidification on residual stress in single-bead-on-plate additive manufacturing. Additive Manufacturing, 34, 101245(2020).
[54] D ROEHLING J, L SMITH W, T ROEHLING T et al. Reducing residual stress by selective large-area diode surface heating during laser powder bed fusion additive manufacturing. Additive Manufacturing, 28, 228-235(2019).
[55] H HUANG, S MA N, J CHEN et al. Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing. Additive Manufacturing, 34, 101248(2020).
[56] B ŞIRIN T, Y KAYNAK. Prediction of residual stress and distortion in laser powder bed fusion additive manufacturing process of Inconel 718 alloy. Procedia CIRP, 99, 330-335(2021).
[57] M SUN J, J HENSEL, M KOHLER et al. Residual stress in wire and arc additively manufactured aluminum components. Journal of Manufacturing Processes, 65, 97-111(2021).
[58] S LI R, L WANG G, S ZHAO X et al. Effect of path strategy on residual stress and distortion in laser and cold metal transfer hybrid additive manufacturing. Additive Manufacturing, 46, 102203(2021).
[59] M STRANTZA, K GANERIWALA R, B CLAUSEN et al. Effect of the scanning strategy on the formation of residual stresses in additively manufactured Ti-6Al-4V. Additive Manufacturing(2021).
[60] N NADAMMAL, T MISHUROVA, T FRITSCH et al. Critical role of scan strategies on the development of microstructure, texture, and residual stresses during laser powder bed fusion additive manufacturing. Additive Manufacturing, 38, 101792(2021).
[61] P PROMOPPATUM, V UTHAISANGSUK. Part scale estimation of residual stress development in laser powder bed fusion additive manufacturing of Inconel 718. Finite Elements in Analysis & Design, 189, 103528(2021).
[62] Q LIU, Y DANLOS, B SONG et al. Effect of high-temperature preheating on the selective laser melting of yttria-stabilized zirconia ceramic. Journal of Materials Processing Technology, 222, 61-74(2015).
[63] Y NIU F, J WU D, S YAN et al. Process optimization for suppressing cracks in laser engineered net shaping of Al2O3 ceramics. The Journal of The Minerals, Metals & Materials Society, 69, 557-562(2017).
[64] K ZHANG, T LIU T, H LIAO W et al. Influence of laser parameters on the surface morphology of slurry-based Al2O3 parts produced through selective laser melting. Rapid Prototyping Journal, 24, 333-341(2018).
[65] B HU Y, D NING F, L CONG W et al. Ultrasonic vibration- assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: effects on crack suppression, microstructure, and mechanical properties. Ceramics International, 44, 2752-2760(2018).
[66] Y ZHENG, K ZHANG, T LIU T et al. Cracks of alumina ceramics by selective laser melting. Ceramics International, 45, 175-184(2019).
[67] F LIU H, J SU H, L SHEN Z et al. Effect of scanning speed on the solidification process of Al2O3/GdAlO3/ZrO2 eutectic ceramics in a single track by selective laser melting. Ceramics International, 45, 17252-17257(2019).
[68] F LIU H, J SU H, L SHEN Z et al. One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition. Journal of the European Ceramic Society, 41, 3547-3558(2021).
[69] F LIU H, J SU H, L SHEN Z et al. Direct formation of Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics by selective laser melting: microstructure evolutions. Journal of the European Ceramic Society, 38, 5144-5152(2018).
[70] F LIU H, J SU H, L SHEN Z et al. Preparation of large-size Al2O3/GdAlO3/ZrO2 ternary eutectic ceramic rod by laser directed energy deposition and its microstructure homogenization mechanism. Journal of Materials Science & Technology, 85, 218-223(2021).
[71] D TRIANTAFYLLIDIS, L LI, H STOTT F. Mechanisms of porosity formation along the solid/liquid interface during laser melting of ceramics. Applied Surface Science, 208, 458-462(2003).
[72] B OLIETE P, I PENA J. Study of the gas inclusions in Al2O3/Y3Al5O12 and Al2O3/Y3Al5O12/ZrO2 eutectic fibers grown by laser floating zone. Journal of Crystal Growth, 304, 514-519(2007).
[73] Q REN, J SU H, J ZHANG et al. Eutectic growth behavior with regular arrangement in the faceted Al2O3/Er3Al5O12 irregular eutectic system at low growth rate. Scripta Materialia, 162, 49-53(2019).
[74] D MA W, J ZHANG, J SU H et al. Theoretical prediction and experimental comparison for eutectic growth of Al2O3/GdAlO3 faceted eutectics. Journal of the European Ceramic Society, 39, 3837-3842(2019).
[75] Q REN, J SU H, J ZHANG et al. Microstructure control, competitive growth and precipitation rule in faceted Al2O3/Er3Al5O12 eutectic in situ composite ceramics prepared by laser floating zone melting. Journal of the European Ceramic Society, 39, 1900-1908(2019).
[76] J SU H, Q REN, J ZHANG et al. Microstructures and mechanical properties of directionally solidified Al2O3/GdAlO3 eutectic ceramic by laser floating zone melting with high temperature gradient. Journal of the European Ceramic Society, 37, 1617-1626(2017).
[77] J SU H, J ZHANG, J CUI C et al. Rapid solidification behaviour of Al2O3/Y3Al5O12(YAG) binary eutectic ceramic in situ composites. Materials Science and Engineering A, 479, 380-388(2008).
[78] R FAN G, J SU H, J ZHANG et al. Microstructure and cytotoxicity of Al2O3-ZrO2 eutectic bioceramics with high mechanical properties prepared by laser floating zone melting. Ceramics International, 44, 17978-17985(2018).
[79] J SU H, J ZHANG, J CUI C et al. Rapid solidification of Al2O3/Y3Al5O12/ZrO2 eutectic in situ composites by laser zone remelting. Journal of Crystal Growth, 307, 448-456(2007).
[80] L MAZEROLLES, N PIQUET, M TRICHET et al. New microstructures in ceramic materials from the melt for high temperature applications. Aerospace Science and Technology, 12, 499-505(2008).
