[3] Liu Yang, Yang Hongbo, Liu Shaobin et al.. Lightweight primary reflector and design of supporting structure for space imaging system [J]. Computer Analysis, 2008, 25(7): 314~316
[4] Yang Liwei, Li Zhilai. Design of a flexible supporting structure based on finite element analysis[J]. J. Changchun University of Science and Technology, 2008, 31(1): 49~52
[5] Huang Qitai. An Analysis on Support Structure of Lightweight SiC Reflecting Mirror[D]. Suzhou: Soochow University, 2004
[6] L. Sakas, M. H. Pedrayes, J. Valdez et al.. Activce primary mirror support for the 2.1 m telescope at the San Pedro Martir Observatory [J]. Appl. Opt., 1997, 36(16): 3708~3716
[7] Robert A. Jones. Fabrication of a large, thin, off-axis aspheric mirror[J]. Opt. Engng., 1994, 33(12): 4067~4075
[8] Donald Golini, William. I. Kordonski, Paul Dumas et al.. Magnetorheological finishing (MRF) in commercial precision optics manufacturing[C]. SPIE, 1999, 3782: 80~91
[9] Jessica E. DeGroote, Anne E. Marino, John P. Wilson et al.. Removal rate model for magnetorheological finishing of glass[J]. Appl. Opt., 2007, 46(32): 7927~7941
[10] Aric Shorey, William Kordonski, Marc Tricard. Magnetorheological finishing of large and lightweight optics [C]. SPIE, 2004, 5533: 99~107
[11] Yang Li. Modern Optical Manufacturing Engineering[M]. Beiging:Science Press, 2008. 85~134
[13] Pietro Schipani, Sergio Dorsi, Luigi Ferragina et al.. Active optics primary mirror support system for the 2.6 m VST telescope[J]. Appl. Opt., 2010, 49(8): 1234~1241
[14] P. Beraud, J. Espiard, R. Geyl et al.. Optical figuring and testing of the VLT8.2 m primary mirrors[C]. SPIE, 1995, 2536: 413~419
[15] P. M. Gray, J. M. Hill, W. H. Davison et al.. Support of large borosilicate honeycomb mirrors[C]. SPIE, 1994, 2199: 691~701
[16] James H. Burge. Simulation and optimization for a computer-controlled large-tool polisher [C]. in Optical Fabrication and Testing of Asphers (FTA), 1999. 34~45