Warp Deformation in Single-Track Laser Cladding Based on Temperature Characteristics

Gong Xinyong; Gao Shiyou; Xian Shiyu; Yu Runxiang

doi:10.3788/lop54.101410

[1] Dubourg L, Archambeault J. Technological and scientific landscape of laser cladding process in 2007［J］. Surface & Coatings Technology, 2008, 202(24): 5863-5869.

[2] Muwala G, Karmakar D P, Nath A K. Online monitoring of thermo-cycles and its correlation with microstructure in laser cladding of nickel based super alloy［J］. Optics and Lasers in Engineering, 2017, 88: 139-152.

[3] Yi P, Liu Y C, Fan C F, et al. Impact analysis of the thermal mechanical coupling characteristics of graphite morphologies during laser cladding of gray cast iron［J］. Optics & Laser Technology, 2017, 90: 52-64.

[4] Huang Weidong, Lin Xin, Chen Jing, et al. Laser solid forming［M］. Xi′an: Northwestern Polytechnical University Press, 2007: 260-262.

[5] Yang Jian. Research on mechanical behavior of laser rapid forming metal part［D］. Xi′an: Northwestern Polytechnical University, 2004: 45.

[6] Zhang Kai, Liu Tingting, Zhang Changdong, et al. Study on deformation behavior in selective laser melting based on the analysis of the melt pool data［J］. Chinese J Lasers, 2015, 42(9): 0903007.

[7] Luo Mingxian. Numerical simulation of thermal-mechanical behavior during laser cladding 316L stainless steel powder［D］. Qinhuangdao: Yanshan University, 2011: 73-74.

[8] Krzyzanowski M, Bajda S, Liu Y J, et al. 3D analysis of thermal and stress evolution during laser cladding of bioactive glass coatings［J］. Journal of the Mechanical Behavior of Biomedical Materials, 2016, 59: 404-417.

[9] Su Yupeng, Wang Xiufeng, Chen Guangnan, et al. Remark on laser bending mechanisms［J］. Material Science and Technology, 2004, 12(5): 543-545.

[10] Wang Wei, Wang Xingliang, Tong Ming, et al. Warping distortion defect of selective laser sintering rapid prototyping work pieces［J］. Foundry Technology, 2010, 4: 507-510.

[11] Deng Shishi, Yang Yongqiang, Li Yang, et al. Planning of area-partition scanning path and its effect on residual stress of SLM molding parts［J］. Chinese J Lasers, 2016, 43(12): 1202003.

[12] Dai Deping, Jiang Xiaohua, Cai Jianpeng, et al. Numerical simulation of temperature field and stress distribution in Inconel718 Ni base alloy induced by laser cladding［J］. Chinese J Lasers, 2015, 42(9): 0903005.

[13] Fang Jinxiang, Dong Shiyun, Xu Binshi, et al. Study of stresses of laser metal deposition using FEM considering phase transformation effects［J］. Chinese J Lasers, 2015, 42(5): 0503009.

[14] Shi Likai, Gao Shiyou, Xi Mingzhe, et al. Finite element simulation for laser direct depositing processes of metallic vertical thin wall partsⅠ. The simulation for temperature field during depositing processes［J］. Acta Metallurgica Sinica, 2006, 42(5): 449-453.

[15] Xi Mingzhe, Zhang Yongzhong, Shi Likai, et al. Numerical simulation of 3D transient temperature field in thin-wall metal parts fabricated by laser direct deposition［J］. The Chinese Journal of Nonferrous metals, 2003, 13(4): 887-892.

[16] Xi Mingzhe, Zhang Yongzhong, Gao Shiyou, et al. Calculation of transient temperature field of thin-walled parts during the process of laser direct forming［C］. Beijing: China Materials Seminar in 2004, 2004: 474.

[17] Gong Xinyong, Luo Jianguo, Gao Shiyou, et al. Numerical simulation of temperature field in laser cladding for different overlap rate［J］. Journal of North China Institute of Science and Technology, 2015, 6: 83-88.

[18] Gong Xinyong, You Wei, Gao Shiyou, et al. Numerical simulation of temperature field in laser cladding for different scanning path［J］. Journal of North China Institute of Science and Technology, 2016, 5: 48-54.