• Chinese Optics Letters
  • Vol. 19, Issue 9, 091404 (2021)
Xun Li1、3, Ming Li1、**, and Hongjun Liu1、2、*
Author Affiliations
  • 1State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics of Chinese Academy of Sciences, Xi’an 710119, China
  • 2Collaborative Innovation Center of Extreme Optics, Shanxi University, Taiyuan 030006, China
  • 3University of Chinese Academy of Sciences, Beijing 100049, China
  • show less
    References
    [1] J. X. Fu, H. Liang, J. Y. Zhang, Y. B. Wang, Y. N. Liu, Z. Y. Zhang, X. C. Lin. Enhanced optical absorbance and fabrication of periodic arrays on nickel surface using nanosecond laser. Opt. Commun., 389, 170(2017).
    [2] P. X. Fan, B. F. Bai, M. L. Zhong, H. J. Zhang, J. Y. Long, J. P. Han, W. Q. Wang, G. F. Jin. A general strategy towards dual-scale controlled metallic micro-nano hybrid structures with ultralow reflectance. ACS. Nano., 11, 7401(2017).
    [3] B. Zheng, W. Wang, G. Jiang, K. Wang, X. Mei. Fabrication of broadband antireflective black metal surfaces with ultra-light-trapping structures by picosecond laser texturing and chemical fluorination. Appl. Phys. B, 122, 180(2016).
    [4] A. Y. Vorobyev, C. Guo. Femtosecond laser blackening of platinum. J. Appl. Phys., 104, 053516(2008).
    [5] A. Y. Vorobyev, C. L. Guo. Enhanced absorptance of gold following multipulse femtosecond laser ablation. Phys. Rev. B, 72, 195422(2005).
    [6] M. H. Dar, R. Kuladeep, V. Saikiran, D. N. Rao. Femtosecond laser nanostructuring of titanium metal towards fabrication of low-reflective surfaces over broad wavelength range. Appl. Surf. Sci., 371, 479(2016).
    [7] I. Etsion. State of the art in laser surface texturing. J. Tribol. Trans., 127, 248(2005).
    [8] J. R. Zhang, W. T. Lin, Y. C. Guan, X. N. Gu. Biocompatibility enhancement of Mg-Gd-Ca alloy by laser surface modification. J. Laser Appl., 31, 022510(2019).
    [9] J. R. Zhang, G. Q. Hu, L. B. Lu, Y. C. Guan, M. H. Hong. Enhancing protein fluorescence detection through hierarchical biometallic surface structuring. Opt. Lett., 44, 339(2019).
    [10] S. Yang, K. Yin, J. Wu, Z. Wu, D. Chu, J. He, J. Duan. Ultrafast nano-structuring of superwetting Ti foam with robust antifouling and stability towards efficient oil-in-water emulsion separation. Nanoscale, 11, 17607(2019).
    [11] K. Yin, D. Chu, X. Dong, C. Wang, J. Duan, J. He, S. Yang, K. Yin, J. Wu, Z. Wu, D. Chu, J. He, J. Duan. Femtosecond laser induced robust periodic nanoripple structured mesh for highly efficient oil–water separation. Nanoscale, 9, 14229(2017).
    [12] G. Q. Li, J. W. Li, Y. L. Hu, C. C. Zhang, X. H. Li, J. R. Chu, W. H. Huang. Realization of diverse displays for multiple color patterns on metalsurfaces. Appl. Surf. Sci., 316, 451(2014).
    [13] H. P. Wang, M. J. He, H. Liu, Y. C. Guan. One-step fabrication of robust superhydrophobic steel surfaces with mechanical durability, thermal stability, and anti-icing function. Appl. Mater., 11, 25586(2019).
    [14] K. C. Park, H. J. Choi, C. H. Chang, R. E. Cohen, G. H. Mckinley, G. Barbastathis. Nanotextured silica surfaces with robust superhydrophobicity and omnidirectional broadband supertransmissivity. ACS Nano, 6, 3789(2012).
    [15] Y. X. Song, C. Wang, X. R. Dong, K. Yin, F. Zhang, Z. Xie, D. K. Chu, J. A. Duan. Controllable superhydrophobic aluminum surfaces with tunable adhesion fabricated by femtosecond laser. Opt. Laser Technol., 26, 34016(2018).
    [16] H. Wu, Y. L. Jiao, C. C. Zhang, C. Chen, L. Yang, J. W. Li, J. C. Ni, Y. C. Zhang, C. Z. Li, Y. Y. Zhang, S. J. Jiang, S. W. Zhu, Y. L. Hu, D. Wu, J. R. Chu. Large area metal micro-/nano-groove arrays with both structural color and anisotropic wetting fabricated by one-step focused laser interference lithography. Nanoscale, 11, 4803(2019).
    [17] A. Y. Vorobyev, A. N. Topkov, O. V. Gurin, V. A. Svich, C. Guo. Enhanced absorption of metals over ultrabroad electromagnetic spectrum. Appl. Phys. Lett., 95, 121106(2009).
    [18] A. Y. Vorobyev, C. Guo. Metallic light absorbers produced by femtosecond laser pulses. Adv. Mech. Eng., 2, 452749(2010).
    [19] H. Huang, L. M. Yang, S. Bai, J. Liu. Blackening of metals using femtosecond fiber laser. Appl. Opt., 54, 324(2015).
    [20] B. W. Wu, C. Wang, Z. Luo, J. H. Li, S. Man, K. W. Ding, J. A. Duan. Controllable annulus micro/nanostructures on copper fabricated by femtosecond laser with spatial doughnut distribution. Chin. Opt. Lett., 18, 013101(2020).
    [21] Y. H. Yue, H. H. Zhu, Z. W. Cao, J. J. He, M. Y. Li. Wide-range optical sensors based on a single ring resonator with polarization multiplexing. Chin. Opt. Lett., 17, 031301(2019).
    [22] G. Q. Li, J. W. Li, C. C. Zhang, Y. L. Hu, X. H. Li, J. R. Chu, W. H. Huang, D. Wu. Large-area one-step assembly of 2.5-dimensional porous metal micro/nanocages by ethanol-assisted femtosecond laser irradiation for enhanced antireflection and hydrophobicity. ACS Appl. Mater., 7, 383(2015).
    [23] P. X. Fan, B. F. Bai, J. Y. Long, D. Jiang, G. F. Jin, H. J. Zhang, M. L. Zhong. Broadband high-performance infrared antireflection nanowires facilely grown on ultrafast laser structured Cu surface. Nano Lett., 15, 5988(2015).
    [24] K. M. T. Ahmmed, C. Grambow, A. M. Kietzig. Fabrication of micro/nano structures on metals by femtosecond laser micromachining. Micromachines, 5, 1219(2014).
    [25] J. Cheng, C. S. Liu, S. Shang, D. Liu, W. Perrie, G. Dearden, K. Watkins. A review of ultrafast laser materials micromachining. Opt. Laser Technol., 46, 88(2013).
    [26] S. Amoruso, G. Ausanio, R. Bruzzese, L. Gragnaniello, L. Lanotte, M. Vitiello, X. Wang. Characterization of laser ablation of solid targets with near-infrared laser pulses of 100 fs and 1 ps duration. Appl. Surf. Sci., 252, 4863(2006).
    [27] P. X. Fan, M. L. Zhong, L. L. T. Huang, H. J. Zhang. Rapid fabrication of surface micro/nano structures with enhanced broadband absorption on Cu by picosecond laser. Opt. Express, 21, 11628(2013).
    [28] K. Wöbbeking, M. Li, E. G. Hübner, W. Schade. Conical microstructuring of titanium by reactive gas assisted laser texturing. RSC Adv., 9, 37598(2019).
    [29] T. Smausz, T. Csizmadia, C. Tápai, J. Kopniczky, A. Oszkó, M. Ehrhardt, P. Lorenz, K. Zimmer, A. Prager, B. Hopp. Study on the effect of ambient gas on nanostructure formation on metal surfaces during femtosecond laser ablation for fabrication of low-reflective surfaces. Appl. Surf. Sci., 389, 1113(2016).
    [30] C. Wang, Y. X. Tian, Z. Luo, Y. Zheng, F. Zhang, K. W. Ding, J. A. Duan. Convex grid-patterned microstructures on silicon induced by femtosecond laser assisted with chemical etching. Opt. Laser Technol., 119, 105663(2019).
    [31] A. J. Antończak, D. Kocoń, M. Nowak, P. Kozioł, K. M. Abramski. Laser-induced colour marking-sensitivity scaling for a stainless steel. Appl. Surf. Sci., 264, 229(2013).
    [32] K. Paivasaari, J. J. J. Kaakkunen, M. Kuittinen, T. Jaaskelainen. Enhanced optical absorptance of metals using interferometric femtosecond ablation. Opt. Express, 15, 13838(2007).
    [33] J. J. J. Kaakkunen, K. Paivasaari, M. Kuittinen, T. Jaaskelainen. Morphology studies of the metal surfaces with enhanced absorption fabricated using interferometric femtosecond ablation. Appl. Phys. A, 94, 215(2009).
    [34] A. Y. Vorobyev, C. L. Guo. Multifunctional surfaces produced by femtosecond laser pulses. J. Appl. Phys., 117, 033103(2015).
    [35] K. Ding, C. Wang, Y. Zheng, Z. Xie, Z. Luo, S. Man, B. W. Wu, J. A. Duan. One-step fabrication of multifunctional fusiform hierarchical micro/nanostructures on copper by femtosecond laser. Surf. Coat. Tech., 367, 244(2019).
    [36] S. W. Zhu, Y. C. Bian, T. Wu, C. Chen, Y. L. Jiao, Z. W. Jiang, Z. C. Huang, E. Q. Li, J. W. Li, J. R. Chu, Y. L. Hu, D. Wu, L. Jiang. High performance bubble manipulation on ferrofluid-infused laser-ablated microstructured surfaces. Nano Lett., 20, 5513(2020).
    [37] H. Tao, X. Song, Z. Hao, J. Lin. One-step formation of multifunctional nano-microscale structures on metal surface by femtosecond laser. Chin. Opt. Lett., 13, 061402(2015).
    [38] K. Ding, M. Li, C. Wang, N. Lin, H. R. Wang, Z. Luo, J. A. Duan. Sequential evolution of colored copper surface irradiated by defocused femtosecond laser. Adv. Eng. Mater., 22, 1901310(2020).
    [39] S. Amoruso, G. Ausanio, A. C. Barone, R. Bruzzese, L. Gragnaniello, M. Vitiello, X. Wang. Ultrashort laser ablation of solid matter in vacuum: a comparison between the picosecond and femtosecond regimes. J. Phys. B: At. Mol. Opt. Phys., 38, L329(2005).
    [40] A. Y. Vorobyev, C. L. Guo. Femtosecond laser nanostructuring of metals. Opt. Express, 14, 2164(2006).
    [41] A. Y. Vorobye, C. Guo. Femtosecond laser structuring of titanium implants. Appl. Surf. Sci., 253, 7272(2007).
    [42] A. Y. Vorobyev, C. L. Guo. Direct femtosecond laser surface nano/microstructuring and its applications. Laser Photon. Rev., 7, 385(2012).
    [43] G. D. Tsibidis, M. Barberoglou, P. A. Loukakos, E. Stratakis, C. Fotakis. Dynamics of ripple formation on silicon surfaces by ultrashort laser pulses in subablation conditions. Phys. Rev. B, 86, 115316(2012).
    [44] C. A. Zuhlke, T. P. Anderson, D. R. Alexander. Formation of multiscale surface structures on nickel via above surface growth and below surface growth mechanisms using femtosecond laser pulses. Opt. Express, 21, 8460(2013).
    [45] T. Yong, H. Wang, A. Y. Vorobyev, C. Guo. Formation of solar absorber surface on nickel with femtosecond laser irradiation. Appl. Phys. A, 108, 299(2012).
    Copy Citation Text
    Xun Li, Ming Li, Hongjun Liu. Enhanced optical absorption surface of titanium fabricated by a femtosecond laser assisted with airflow pressure[J]. Chinese Optics Letters, 2021, 19(9): 091404
    Download Citation
    Category: Lasers, Optical Amplifiers, and Laser Optics
    Received: Jan. 1, 2021
    Accepted: Mar. 4, 2021
    Published Online: Jun. 15, 2021
    The Author Email: Ming Li (liming@opt.ac.cn), Hongjun Liu (liuhongjun@opt.ac.cn)