Design and Test of High Precision and Stability Support Structure for Secondary Mirror

Tingyun Luo; Sihui Li; Jiaohong Shi

doi:10.3788/LOP202259.0712004

[1] Du K, Liu C Y, Liu S et al. Design of coaxial ultra-compact primary and tertiary mirror integrated optical system[J]. Laser & Optoelectronics Progress, 57, 072202(2020).

[2] Zhou M Y, Hou J F, Wang D G et al. Design and verification of depolarized derotator alignment scheme in astronomical telescope[J]. Chinese Journal of Lasers, 47, 0604005(2020).

[3] Li W, Liu H W, Guo Q F et al. Combined supporting structure of thin wall joint cylinder and supporting bar between primary mirror and second mirror in space camera[J]. Optics and Precision Engineering, 18, 2633-2641(2010).

[4] Zhao Y, Li L, Yang H B. The optimal design of bracket structure for the second mirror of a large-aperture space optical remote sensor[J]. Mechanical Science and Technology for Aerospace Engineering, 31, 373-378(2012).

[5] Chen R L, Zhang Y K, Fan X W et al. Design of bracket structure for the second mirror of space high resolution CCD camera[J]. Acta Photonica Sinica, 33, 1251-1254(2004).

[6] Wang Q X, Guo C L. Optimization of secondary mirror supporting structure based on iSIGHT integrated platform[J]. Spacecraft Recovery & Remote Sensing, 35, 54-61(2014).

[7] Zhang L, Jin G. New supporting structure of secondary mirror for coaxial reflective space telescope[J]. Infrared and Laser Engineering, 41, 2401-2404(2012).

[8] Han C Y. Study on optical system of high resolution space camera[J]. Optics and Precision Engineering, 16, 2164-2172(2008).

[9] Wu Q W, Yang H B, Yang J S et al. Design and analysis for primary mirror and its support of space camera[J]. Optical Technique, 30, 153-156(2004).

[10] Li W, Liu H W. Structure stability of precision component made of carbon fiber composite in space optical remote sensor[J]. Optics and Precision Engineering, 16, 2173-2179(2008).

[11] Fan Z G, Chang H, Chen S Q. Thermal stress and deformation analysis of bonded optics[J]. Optical Technique, 37, 366-369(2011).

[12] Luo T Y, Zhang F Q, Fan B. Design and analysis of side support for large aspect ratio mirror[J]. Spacecraft Recovery & Remote Sensing, 34, 66-70(2013).

[13] Shi J H, Luo S K, Tang L et al. The structural design of a φ650 mm primary mirror subassembly[J]. Spacecraft Environment Engineering, 35, 258-262(2018).

[14] Zhao C X. Study on application of residual stress relieving by using vibration-ageing method[J]. Aerospace Manufacturing Technology, 44-47(2008).