[1] Yuan Weizheng, Li Xiaoying. Micro machine and micro fabrication technology［J］. Mechanical Science and Technology, 1997, 16(3): 503～508
[2] Shan Debin, Yuan Lin, Guo Bin. Research situation and development trends in micro forming［J］. Journal of Plasticity Engineering, 2008, 15(2): 46～53
[3] Y. Saotome, S. Miwa, T. Zhang et al.. The micro-formability of Zr-based amorphous alloys in the supercooled liquid state and their application to micro-dies［J］. J. Mater. Process. Technol., 2001, 113(1-3): 64～69
[4] Huixia Liu, Zongbao Shen, Xiao Wang et al.. Micromould based laser shock embossing of thin metal sheets for MEMS applications［J］. Appl. Surf. Sci., 2010, 256(14): 4687～4691
[6] Huixia Liu, Zongbao Shen, Xiao Wang et al.. Numerical simulation and experimentation of a novel micro scale laser high speed punching［J］. International Journal of Machine Tools & Manufacture, 2010, 50(5): 491～494
[7] U. Engel, R. Eckstein. Microforming-from basic research to its realization［J］. J. Mater. Process. Technol., 2002, 125-126: 35～44
[8] Byung-Yun Joo, Sung-Han Rhim, Soo-Ik Oh. Micro-hole fabrication by mechanical punching process［J］. J. Mater. Process. Technol., 2005, 170(3): 593～601
[9] B. Y. Joo, S. I. Oh, B. H. Jeon. Development of micro punching system［J］. Ann. CIRP, 2001, 50(1): 191～194
[10] Cogan S., Shirman E., Haas Y.. Production efficiency of thin metal flyers formed by laser ablation［J］. J. Appl. Phys., 2005, 97(11): 113508～113513
[11] Jing Fuqian, Chen Junxiang. Dynamic High-Pressure Generation Principle and Related Technologies［M］. Beijing: National Defence Industry Press, 2006. 33
[12] T. de Rességuier, H. He, P. Berterretche. Use of laser-accelerated foils for impact study of dynamic material behavior［J］. International Journal of Impact Engineering, 2005, 31(8): 945～956
[13] R. Fabbro, J. Fournier, P. Ballard et al.. Physical study of laser-produced plasma in confined geometry［J］. J. Appl. Phys., 1990, 68(2): 775～784
[14] Johnson G. R., Cook W. H.. A constiutive model and data for metals subjected to large strains, high strain rates and high temperatures［C］. Proceedings of the Seventh International Symposium on Ballistics, 1983. 541～547
[15] Poizat C., Campagne L., Daridon L.. Modeling and simulation of thin sheet blanking using damage and rupture criteria［J］. Int. J. Form. Processes, 2005, 8(1): 29～47
[16] Johnson G. R., Cook W. H.. Fracture charateristics of three metals subjected to various strain rates, temperatures and pressures［J］. Eng. Fract. Mech., 1985, 21(1): 31～48
