• Acta Optica Sinica
  • Vol. 43, Issue 23, 2307001 (2023)
Enxing He, Youhua Chen, Shunyu Xie, and Cuifang Kuang*
Author Affiliations
  • State Key Laboratory of Modern Optical Instrumentation, College of Optical Science and Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China
  • show less
    DOI: 10.3788/AOS231057 Cite this Article Set citation alerts
    Enxing He, Youhua Chen, Shunyu Xie, Cuifang Kuang. Phase Calibration Method of Electro-Optic Modulator Based on Cross-Correlation[J]. Acta Optica Sinica, 2023, 43(23): 2307001 Copy Citation Text show less
    Six simulated stripe images generated by Matlab
    Fig. 1. Six simulated stripe images generated by Matlab
    +1 order or -1 order spectrum mask screenshots corresponding to stripes in Fig. 1
    Fig. 2. +1 order or -1 order spectrum mask screenshots corresponding to stripes in Fig. 1
    Picture of system used to calibrate electro-optical modulator (optical path used is marked by lines with arrows)
    Fig. 3. Picture of system used to calibrate electro-optical modulator (optical path used is marked by lines with arrows)
    Simplified structure of optical path of calibration system
    Fig. 4. Simplified structure of optical path of calibration system
    Flow chart of phase difference calculation. (a) 20 fringe images; (b) Fourier spectrum; (c) spectrum with 0 order removed in center; (d) extracted +1 order spectrum; (e) relative phase of each image calculated by cross-correlation calculation and phase-voltage fitting line
    Fig. 5. Flow chart of phase difference calculation. (a) 20 fringe images; (b) Fourier spectrum; (c) spectrum with 0 order removed in center; (d) extracted +1 order spectrum; (e) relative phase of each image calculated by cross-correlation calculation and phase-voltage fitting line
    Comparison of calculated results and standard values. (a) Results for 640 nm laser; (b) results for 561 nm laser
    Fig. 6. Comparison of calculated results and standard values. (a) Results for 640 nm laser; (b) results for 561 nm laser
    Phase difference of fringes measured by contour method. (a) Fringes generated by electro-optic modulator at different voltages; (b) distribution of normalized grayscale value in underlined portion in Fig. 7(a); (c) position of lowest points in wireframe in Fig. 7(b)
    Fig. 7. Phase difference of fringes measured by contour method. (a) Fringes generated by electro-optic modulator at different voltages; (b) distribution of normalized grayscale value in underlined portion in Fig. 7(a); (c) position of lowest points in wireframe in Fig. 7(b)
    Enxing He, Youhua Chen, Shunyu Xie, Cuifang Kuang. Phase Calibration Method of Electro-Optic Modulator Based on Cross-Correlation[J]. Acta Optica Sinica, 2023, 43(23): 2307001
    Download Citation