[1] Philips. White Paper: Street Lighting. www.lumileds.com
[2] Liu S, Luo X B. LED Packaging for Lighting Applications: Design, Manufacturing and Testing. New York: Wiley and Chemical Industry Press, 2011
[3] Mottier P. LEDs for Lighting Applications. New York: Wiley, 2008
[4] Shin H W, Lee H S, Bang J H, Yoo S H, Jung S B, Kim K D. Variation of thermal resistance of LED module embedded by thermal via. Journal of the Microelectronics & packaging Society, 2010, 17(4): 95-100
[5] Arik M, Becker C, Weaver S, Petroski J. Thermal management of LEDs: package to system. Proceedings of the SPIE, 2004, 5187: 64-75
[6] Cheng T, Luo X B, Huang S Y, Liu S. Thermal analysis and optimization of multiple LED packaging based on a general analytical solution. International Journal of Thermal Sciences, 2010, 49(1): 196-201
[7] Tsai M Y, Chen C H, Kang C S. Thermal measurements and analyses of low-cost high power LED packages and their modules. Microelectronics and Reliability, 2011
[8] Liou B H, Chen C H, Horng R H, Chiang Y C, Wuu D S. Improvement of thermal management of high-power GaN-based light-emitting diodes. Microelectronics and Reliability, 2011
[9] Yung K C, Liem H, Choy H S, Lun W K. Thermal performance of high brightness LED array package on PCB. International Communications in Heat and Mass Transfer, 2010, 37(9): 1266-1272
[10] Weng C J. Advanced thermal enhancement and management of LED packages. International Communications in Heat and Mass Transfer, 2009, 36(3): 245-248
[11] Christensen A, Graham S. Thermal effects in packaging high power light emitting diode arrays. Applied Thermal Engineering, 2009, 29(2-3): 364-371
[12] Kim L, Choi J H, Jang S H, Shin M W. Thermal analysis of LED array system with heat pipe. Thermochimica Acta, 2007, 455(1-2): 21-25
[13] Anithambigai P, Dinash K, Mutharasu D, Shanmugan S, Lim C K. Thermal analysis of power LED employing dual interface method and water flow as a cooling system. Thermochimica Acta, 2011, 523(1-2): 237-244
[14] Sim J K, Ashok K, Ra Y H, Im H C, Baek B J, Lee C R. Characteristic enhancement of white LED lamp using low temperature co-fired ceramic-chip on board package. Current Applied Physics, 2012, 12(2): 494-498
[15] Zhou W, Qi S, Li H, Shao S. Study on insulating thermal conductive BN/HDPE composites. Thermochimica Acta, 2007, 452(1): 36-42
[16] Kang M, Kang S. Influence of Al2O3 additions on the crystallization mechanism and properties of diopside/anorthite hybrid glassceramics for LED packaging materials. Journal of Crystal Growth, 2011, 326(1): 124-127
