Fabrication and bacterial adhesion of metal dry electrode with surface microstructure arrays

Shaoyu Liu; Wei Zhou; Yaoyao Li; Jiachang Fang; Chenying Zhang; Ronghua Lu; Guifeng Ye

doi:10.3969/j.issn.1003-501x.2017.12.006

[1] Srivastava A K，Bhartia B，Mukhopadhyay K，et al. Long term biopotential recording by body conformable photolithography fabricated low cost polymeric microneedle arrays[J]. Sensor And Actuators A :Physical，2015，236(9)：164–172.

[2] Zhou Wei，Liu Wei，Qiu Qingfu，et al. Development，fabrication，and applications of biomedical electrodes[J]. Chinese Science Bulletin，2015，60(15)：1352–1360.

[3] Shi Hengchong, Yin Jinghua. Surface construction of anti-bacterial property on biomedical polymer materials and its application on medical device[J]. Polymer Bulletin, 2016(9): 196–202.

[4] Wang Zhangming, Sun Wei, Tian Xiubo, et al. Progress in antibacterial field by surface modification[J]. Journal of Ma-terials Science & Engineering, 2006, 24(5): 787–791.

[5] Yuan Yue, Hays M P, Hardwidge P R, et al. Surface charac-teristics influencing bacterial adhesion to polymeric sub-strates[J]. RSC Advances, 2017, 7(23): 14254–14261.

[6] Jiang You, Yin Yijie, Zha Xincheng, et al. Wettability regulated gram-negative bacterial adhesion on biomimetic hierarchical structures[J]. Chinese Chemical Letters, 2017, 28(4): 813–817.

[7] Hou Shuyu, Gu Huan, Smith C, et al. Microtopographic patterns affect Escherichia coli biofilm formation on poly(dimethylsiloxane) surfaces[J]. Langmuir, 2011, 27(6): 2686–2691.

[8] Zhou Rui, Li Fengping. Synthesis of nanoparticles by short pulsed laser ablation and its applications in nonlinear optics[J]. Opto-Electronic Engineering, 2017, 44(2): 172–184.

[9] Yan Huangping, Abdul Rashid M R B, Khew Si Ying, et al. Realization of laser textured brass surface via temperature tuning for surface wettability transition[J]. Opto-Electronic Engineering, 2017, 44(6): 587–592.

[10] Guan Y C, Zhou W, Li Z L, et al. Femtosecond laser-induced ripple structures on magnesium[J]. Applied Physics A, 2014, 115(1): 13–18.

[11] Lee S W, Shin H S, Chu C N. Fabrication of micro-pin array with high aspect ratio on stainless steel using nanosecond laser beam machining[J]. Applied Surface Science, 2013, 264: 653–663.

[12] Zhou Wei, Song Rong, Pan Xiaoling, et al. Fabrication and impedance measurement of novel metal dry bioelectrode[J]. Sensors and Actuators A: Physical, 2013, 201: 127–133.

[13] Wang Xiao, Li Liyin, Shen Zongbao, et al. Experimental investigation on: Laser shock micro-forming process using the mask and flexible pad[J]. Optics and Lasers in Engineering, 2017, 88: 102–110.

[14] Miyagi M, Zhang Xuedong, Kawahito Y, et al. Surface void suppression for pure copper by high-speed laser scanner welding[J]. Journal of Materials Processing Technology, 2017, 240: 52–59.

[15] Zhou Wei, Liu Wei, Liu Shaoyu, et al. Experimental investi-gation on surface wettability of copper-based dry bioelec-trodes[J]. Sensors and Actuators A: Physical, 2016, 244: 237–242.

[16] Tang M, Shim V, Pan Z Y, et al. Laser ablation of metal substrates for super-hydrophobic effect[J]. Journal of Laser Micro/Nanoengineering, 2011, 6(1): 6–9.