[1] Soulard R, Quinn M N, Mourou G. Design and properties of a coherent amplifying network laser［J］. Applied Optics, 2015, 54(15): 4640-4645.
[2] Danson C, Hillier D, Hopps N, et al. Petawatt class lasers worldwide［J］. High Power Laser Science and Engineering, 2015, 3(1): e3.
[3] Mourou G A, Hulin D, Galvanauskas A. The road to high peak power and high average power lasers: Coherent-amplification-network (CAN)［C］. Superstrong Fields in Plasmas: Third International Conference on Superstrong Fields in Plasmas, 2006, 827(1): 152-163.
[4] Labaune C, Hulin D, Galvanauskas A, et al. On the feasibility of a fiber-based inertial fusion laser driver［J］. Optics Communications, 2008, 281(15): 4075-4080.
[5] Tünnermann A, Schreiber T, Limpert J. Fiber lasers and amplifiers:An ultrafast performance evolution［J］. Applied Optics, 2010, 49(25): F71-F78.
[6] Brooks C D, Di Teodoro F. High peak power operation and harmonic generation of a single-polarization, Yb-doped photonic crystal fiber amplifier［J］. Optics Communications, 2007, 280(2): 424-430.
[7] Rser F, Eidam T, Rothhardt J, et al. Millijoule pulse energy high repetition rate femtosecond fiber chirped-pulse amplification system［J］. Optics Letters, 2007, 32(24): 3495-3497.
[8] Zhang Chuang. Frontiers of particle accelerators in the world［J］. Physics, 2008, 37(5): 289-297.
[9] Tajima T, Brocklesby W S, Mourou G, et al. ICAN: The next laser powerhouse［J］. Optics & Photonics News, 2013, 24(5): 36-43.
[10] Brocklesby W S, Nilsson J, Schreiber T, et al. ICAN as a new laser paradigm for high energy, high average power femtosecond pulses［J］. European Physical Journal Special Topics, 2014, 223(6): 1189-1195.
[11] Mourou G A, Labaune C, Hulin D, et al. New amplifying laser concept for inertial fusion driver［C］. Journal of Physics: Conference Series, 2008, 112(3): 032052.
[12] Huang Zhihua. The laser coupling and beam evolution of the fiber-based high-energy high-power pulsed laser system［D］. Beijing: Tsinghua University, 2013.
[13] Yu C X, Augst S J, Redmond S M, et al. Coherent combining of a 4 kW, eight-element fiber amplifier array［J］. Optics Letters, 2011, 36(14): 2686-2688.
[14] Redmond S M, Ripin D J, Yu C X, et al. Diffractive coherent combining of a 2.5 kW fiber laser array into a 1.9 kW Gaussian beam［J］. Optics Letters, 2012, 37(14): 2832-2834.
[15] Antier M, Bourderionnet J, Larat C, et al. kHz closed loop interferometric technique for coherent fiber beam combining［J］. IEEE Journal of Selected Topics in Quantum Electronics, 2014, 20(5): 182-187.
[16] Zhou Jun, He Bing, Xue Yuhao, et al. Study on passive coherent beam combination technology of high power fiber laser arrays［J］. Acta Optica Sinica, 2011, 31(9): 0900129.
[17] Huang Z M, Liu C L, Li J F, et al. Fiber polarization control based on a fast locating algorithm［J］. Applied Optics, 2013, 52(27): 6663-6668.
[18] Huang Zhimeng. Research on active phase locking and adaptive polarization control technology of fiber lasers［D］. Mianyang: China Academy of Engineering Physics, 2014.
[20] Mu Jie, Jing Feng, Wang Xiao, et al. Error control of piston and tilt based on SPGD in coherent beam combination［J］. Chinese J Lasers, 2014, 41(6): 0602002.
[21] Mu Jie, Wang Xiao, Jing Feng, et al. Effect of wavefront distortion on coherent beam combination in high-power laser facilities［J］. Chinese J Lasers, 2015, 42(6): 0602010.
[22] Ma Pengfei, Wang Xiaolin, Su Rongtao, et al. Coherent polarization beam combining of fiber lasers to 2 kW power level［J］. High Power Laser and Particle Beams, 2016, 28(4): 040102.
[23] Mourou G A, Fisch N J, Malkin V M, et al. Exawatt-Zettawatt pulse generation and applications［J］. Optics Communications, 2012, 285(5): 720-724.
[24] Eidam T, Hanf S, Seise E, et al. Femtosecond fiber CPA system emitting 830 W average output power［J］. Optics Letters, 2010, 35(2): 94-96.
[25] Eidam T, Rothhardt J, Stutzki F,et al. Fiber chirped-pulse amplification system emitting 3.8 GW peak power［J］. Optics Express, 2011,19(1): 255-260.
[26] Cheng M Y, Chang Y C, Galvanauskas A, et al. High-energy and high-peak-power nanosecond pulse generation with beam quality control in 200 μm core highly multimode Yb-doped fiber amplifiers［J］. Optics Letters, 2005, 30(4): 358-360.
[27] Cheng M Y, Hou K C, Galvanauskas A, et al. High average power generation of single-transverse mode MW-peak power pulses using 80 μm core Yb-doped LMA fibers［C］. Conference on Lasers & Electro-optics & Quantum Electronics & Laser Science Conference, 2006, CThAA: CThAA3.
[28] Stutzki F, Jansen F, Liem A, et al. 26 mJ, 130 W Q-switched fiber-laser system with near-diffraction-limited beam quality［J］. Optics Letters, 2012, 37(6): 1073-1075.
[29] Zhang H T, Shen X L, Chen D, et al. High energy and high peak power nanosecond pulses generated by fiber amplifier［J］. IEEE Photonics Technology Letters, 2014, 26(22): 2295-2298.
[30] Shen X L, Zhang H T, He H, et al. Self-phase modulation of nanosecond pulses in fiber amplifiers with gain saturation［J］. Optics Express, 2016, 24(5): 4382-4390.
[31] Du S T, Wang Z W, Wang Z K, et al. All fiber high average power nanosecond laser based on core diameter adjustment［J］. Chinese Optics Letters, 2013, 11(9): 091402.
[32] Xu T, Xu L X, Wang A T, et al. Optimization of beam configuration in laser fusion based on the laser beam pattern［J］. Physics of Plasmas, 2013, 20(12): 122702.
[33] Esirkepov T, Borghesi M, Bulanov S V, et al. Highly efficient relativistic-ion generation in the laser-piston regime［J］. Physical Review Letters, 2004, 92(17): 175003.
[34] Leemans W, Chou W, Uesaka M. White paper of the ICFA-ICUIL joint task force: High power laser technology for accelerators［J］. ICFA Beam Dynamics Newsletter, 2011, 56: 10-87.
[36] Mourou G, Tajima T, Quinn M N, et al. Are fiber-based lasers the future of accelerators ［J］. Nuclear Instrument and Methods in Physics Research, 2014, 740(4): 17-20.
[37] Gales S. Laser driven nuclear science and applications: The need of high efficiency, high power and high repetition ratelaser beams［J］. European Physical Journal Special Topics, 2015, 224(13): 2631-2637.
[38] Mourou G, Brocklesby B, Tajima T, et al. The future is fibre accelerators［J］. Nature Photonics, 2013, 7(4): 258-261.
[39] Bychenkov V Y, Brantov A V. Laser-based ion sources for medical applications［J］. European Physical Journal Special Topics, 2015, 224(13): 2621-2624.
[40] Mourou G, Tajima T. Summary of the IZEST science and aspiration［J］. European Physical Journal Special Topics, 2014, 223(6): 979-984.
[41] Zhou Meilin, Yan Xueqing. The development of a laser plasma accelerator［J］. Physics, 44(5): 281-289.
[42] Zhang Shijie, Duan Chenyang, Su Hang. Natural-artificial space security threats and their mitigation strategies［J］. Journal of Command and Control, 2015, 1(1): 92-98.
[43] Soulard R, Quinn M N, Tajima T, et al. ICAN: A novel laser architecture for space debris removal［J］. Acta Astronautica, 2014, 105(1): 192-200.
[44] Schall W O. Laser requirements for the removal of space debris from orbit［C］. Twelfth International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference, International Society for Optics and Photonics, 1998: 426-436.
[45] Ebisuzaki T, QuinnM N, Wada S, et al. Demonstration designs for the remediation of space debris from the international space station［J］. Acta Astronautica, 2015, 112: 102-113.
[46] Hora H, Lalousis P, Giuffrida L, et al. Petawatt laser pulses for proton-boron high gain fusion without problem of nuclear radiation［C］. SPIE, 2015, 9515: 951518.
[47] Hora H. Laser fusion with nonlinear force driven plasma blocks: Thresholds and dielectric effects［J］. Laser and Particle Beams, 2009, 27(2): 207-222.
[48] Hora H, Lalousis P, Moustaizis S. Fiber ICAN laser with exawatt-picosecond pulses for fusion without nuclear radiation problems［J］. Laser and Particle Beams, 2014, 32(1): 63-68.
