[1] Zhang S S, Li M Q, Liu Y G et al. The growth behavior of austenite grain in the heating process of 300M steel[J]. Materials Science and Engineering: A, 528, 4967-4972(2011).

[2] Tsai M C, Chiou C S, Du J S et al. Phase transformation in AISI 410 stainless steel[J]. Materials Science and Engineering: A, 332, 1-10(2002).

[3] Kong D J, Zhang L, Song R G et al. Effect of laser quenching on fatigue properties and fracture morphologies of 40CrNiMo high strength steel[J]. Chinese Journal of Lasers, 40, 1103005(2013).

[4] Jin M, He D Y, Wang Z J et al. Microstructure and properties of laser cladded 2205 dual-phase stainless steel/TiC composite coatings[J]. Laser & Optoelectronics Progress, 55, 111403(2018).

[5] Campanelli S L, Angelastro A, Posa P et al. Fiber laser surface remelting of a nickel-based superalloy by an integrated rectangular laser spot[J]. Optics and Lasers in Engineering, 111, 42-49(2018).

[6] Wang Z, Zhang Q K, Guo P S et al. Effects of laser surface remelting on microstructure and properties of biodegradable Zn-Zr alloy[J]. Materials Letters, 226, 52-54(2018).

[7] Luo X M, Wang X, Chen K M et al. Surface layer high-entropy structure and anti-corrosion performance of aero-aluminum alloy induced by laser shock processing[J]. Acta Metallurgica Sinica, 51, 57-66(2015).

[8] Chen H X, Kong D J. Effects of laser remelting speeds on microstructure, immersion corrosion, and electrochemical corrosion of arc-sprayed amorphous Al-Ti-Ni coatings[J]. Journal of Alloys and Compounds, 771, 584-594(2019).

[9] Dudek A, Wronska A, Adamczyk L. Surface remelting of 316 L+434 L sintered steel: microstructure and corrosion resistance[J]. Journal of Solid State Electrochemistry, 18, 2973-2981(2014).

[10] Chan W K, Kwok C T, Lo K H. Effect of laser surface melting and subsequent re-aging on microstructure and corrosion behavior of aged S32950 duplex stainless steel[J]. Materials Chemistry and Physics, 207, 451-464(2018).

[11] Liu F G, Lin X, Song K et al. Microstructure and mechanical properties of laser forming repaired 300M steel[J]. Acta Metallurgica Sinica, 53, 325-334(2017).

[12] Tao X G, Han L Z, Gu J F. Effect of tempering on microstructure evolution and mechanical properties of X12CrMoWVNbN10-1-1 steel[J]. Materials Science and Engineering: A, 618, 189-204(2014).

[13] Yan W, Zhu L, Sha W et al. Change of tensile behavior of a high-strength low-alloy steel with tempering temperature[J]. Materials Science and Engineering: A, 517, 369-374(2009).

[14] Liu X X, Cheng X, Wang H M et al. Influence of processing conditions on formation of stray grains in DD5 single-crystal superalloys by laser melting multi-traced deposition[J]. Chinese Journal of Lasers, 44, 0602009(2017).

[15] Cao C N[M]. Principles of electrochemistry of corrosion, 176-177(2008).

[16] Mi F Y, Wang X D, Wang B et al. Influence of microstructure on the corrosion resistance for low carbon steel[J]. Journal of Chinese Society for Corrosion and Protection, 30, 391-395(2010).

[17] Yang J L, Huang F, Guo Z H et al. Effect of retained austenite on the hydrogen embrittlement of a medium carbon quenching and partitioning steel with refined microstructure[J]. Materials Science and Engineering: A, 665, 76-85(2016).