Effect of Assembly Stress Symmetry of Interference Optical Path on Shupe Error

Yunqiang Fan; Jixun Huang; Jing Li

doi:10.3788/AOS202141.2112002

[1] Feng W S, Wang X F, Wang W. Effect of turns’ difference in each layer on temperature performance of fiber optic gyroscope[J]. Journal of Chinese Inertial Technology, 19, 487-493(2011).

[2] Yan H, Yang Y H, Yang F L. Response model and compensation technology of thermal diffusion delay in fiber optic gyro coil[J]. Chinese Journal of Lasers, 46, 0106003(2019).

[3] Wang X Q, Zhang T, Liang L J et al. Testing technique of polarization-coupling distribution of fiber coil and beat length of used fiber[J]. Laser & Optoelectronics Progress, 57, 230602(2020).

[4] Chen H Y, Zheng Y, Wang X X et al. Influence of mean wavelength on scale factor of fiber optic gyroscope[J]. Chinese Journal of Lasers, 46, 0306002(2019).

[5] Shupe D M. Thermally induced nonreciprocity in the fiber-optic interferometer[J]. Applied Optics, 19, 654-655(1980).

[6] Wang Y Z, Chen X D, Zhang G C et al. Effect of octupole-winding on temperature performance of fiber optic gyroscope[J]. Journal of Chinese Inertial Technology, 20, 617-620(2012).

[7] Li X Y, Zhang C M, Liu H B et al. Simulation and analysis on temperature performance of fiber ring by 16-polar symmetrical winding method[J]. Journal of Chinese Inertial Technology, 24, 780-785(2016).

[8] Bi C Z, Yang J G, Wu Y J et al. Temperature sensitivity measurement and analysis of polarization maintaining fiber for FOG[J]. Journal of Chinese Inertial Technology, 22, 677-681(2014).

[9] Yuan L B. Effect of temperature and strain on fiber optic refractive index[J]. Acta Optica Sinica, 17, 114-118(1997).

[10] Zhang Y H, Zhang Y G, Gao Z X. Thermal-induced phase-shift error of a fiber-optic gyroscope due to fiber tail length asymmetry[J]. Applied Optics, 56, 273-277(2017).

[11] Fei T, Xu X B, Zhang Z C et al. Modeling and reduction of thermally induced non-reciprocal error in differential interference fiber optic gyroscope sensing coil[J]. Optik, 126, 1295-1299(2015).

[12] Liu J H, Li R C. Analysis of thermal drift in high performance interferometric fiber-optic gyroscopes[J]. Chinese Optics, 13, 333-343(2020).

[13] Yu P, Ji M N. Integral method of stress birefringence calculation and fiber design optimization[J]. Chinese Journal of Lasers, 42, 0305002(2015).

[14] Minakuchi S, Sanada T, Takeda N et al. Thermal strain in lightweight composite fiber-optic gyroscope for space application[J]. Journal of Lightwave Technology, 33, 2658-2662(2015).

[15] Osunluk B, Ogut S, Ozbay E. Thermally induced bias error due to strain inhomogeneity through the fiber optic gyroscope coil[J]. Applied Optics, 59, 10416(2020).

[16] Han Z Y, Gao H, Gao Y S et al. Effect of strain distribution measurement of fiber coil on FOG performance[J]. Infrared and Laser Engineering, 43, 4128-4132(2014).