[1] Li Jinwei. The discussion of the carbon fiber reinforced composite material performance characteristics and application fields[J]. Chemical Industry, 2015, 33(8): 13-18.
[2] Gu Zhuowei, Perton Mathieu, Kruger Silvio E, et al. Bonding quality detection of composite structure by laser shock wave[J]. Chinese J Lasers, 2011,38(3):0308002.
[3] Tan Xianghu, Shan Jiguo, Tang Lei, et al. Study on laser surfi-sculpt of GMW2 autobody sheet steel for carbon fiber reinforced polymer/steel dissimilar joint[J]. Chinese J Lasers, 2015, 42(3): 0303002.
[5] Wróbel G, Pawlak S, Muzia G. Thermal diffusivity measurements of selected fiber reinforced polymer composites using heat pulse method[J]. Archives of Materials Science and Engineering, 2011, 48(1): 25-32.
[6] Wróbel G, Rdzawski Z, Muzia G, et al. Determination of thermal diffusivity of carbon/epoxy composites with different fiber content using transient thermography[J]. Journal of Achievements in Materials and Manufacturing Engineering, 2009, 37(2): 518-525.
[7] Wróbel G, Rdzawski Z, Muzia G, et al. Quantitative analysis of the fibre content distribution in CFRP composites using thermal non-destructive testing[J]. Archives of Materials Science and Engineering, 2010, 41(1): 28-36.
[8] Wróbel G, Pawlak S, Muzia G. Thermal diffusivity measurements of selected fiber reinforced polymer composites using heat pulse method[J]. Archives of Materials Science and Engineering, 2011, 48(1): 25-32.
[9] Kuribara M, Nagano H. Anisotropic thermal diffusivity measurements in high-thermal-conductive carbon-fiber-reinforced plastic composites[J]. Journal of Electronics Cooling and Thermal Control, 2015, 5(1): 15-25.
[10] Ramosa M E, Bonelli P R, Cukierman A L, et al. Influence of thermal treatment conditions on porosity development and mechanical properties of activated carbon cloths from a novel nanofibre-made fabric[J]. Materials Chemistry and Physics, 2009, 116(2/3): 310-314.
[11] Liu Ling, Lu Mingkun, Zhang Boming, et al. Effects of porosity on the ultrasonic absorption coefficient and mechanical strength of carbon epoxy composites[J]. Acta Materiae Compositae Sinica, 2004, 21(5): 116-138.
[12] Fuente R, Mendioroz A, Apianiz E, et al. Simultaneous measurement of thermal diffusivity and optical absorption coefficient of solids using PTR and PPE: a comparison[J]. International Journal of Thermophysics, 2012, 33(10/11): 1876-1886.
[13] Fuente R, Apianiz E, Mendioroz, et al. Simultaneous measurement of thermal diffusivity and optical absorption coefficient using photothermal radiometry. I. Homogeneous solids[J]. Journal of Applied Physics, 2011, 110(3): 033515.
[14] Mayr G, Plank B, Sekelja J, et al. Active thermography as a quantitative method for non-destructive evaluation of porous carbon fiber reinforced polymers[J]. NDT & E International, 2011, 44(7): 537-543.
[15] Wu Enqi, Shi Yufang, Li Meihua, et al. Research on in-plane thermal conduction of woven carbon fiber reinforced polymers[J]. Chinese J Lasers, 2016, 43(7): 0703004.
[16] Wu Enqi, Xu Zihong, Guo Xinxin, et al. Influence of porosity on thermal properties of carbon fiber reinforced polymers[J]. Chinese J Lasers, 2015, 42(7): 0706006.
[17] Stratoudaki T, Edwards C, Dixon S, et al. Optical absorption of epoxy resin and its role in the laser ultrasonic generation mechanism in composite materials[C]. AIP Conference Proceedings, 2003, 657(1): 965-972.
[18] Salazar A. On thermal diffusivity[J]. European Journal of Physics, 2003, 24(4): 351-358.