[2] Zhao Hengzhang, Yang Yingli, Hong Quan et al. Study on laser shock processing and its application for titanium alloys[J]. Titanium Industry Progress, 28, 34-38(2011).
[3] Zou Shikun, Gong Shuili, Guo Enming et al. Laser peening of turbine engine integrally blade rotor[J]. Chinese J Lasers, 38, 0601009(2011).
[4] Li Jing, Li Jun, He Weifeng et al. Microstructure and mechanical properties of TC17 titanium alloy by laser shock peening with different impacts[J]. Infrared and Laser Engineering, 43, 2889-2895(2014).
[5] Meng Xiankai, Zhou Jianzhong, Huang Shu et al. Residual stress relaxation and fatigue properties of TC4 titanium alloy induced by warm laser peening under high-cycle fatigue[J]. Rare Metal Materials and Engineering, 44, 1185-1190(2015).
[6] Fabbro R, Peyre P, Berthe L et al. Physics and applications of laser-shock processing[J]. Journal of Laser Applications, 10, 265-279(1998). http://scitation.aip.org/content/lia/journal/jla/10/6/10.2351/1.521861
[7] Nie Xiangfan, He Weifeng, Zang Shunlai et al. Experimental study on improving high-cycle fatigue performance of TC11 titanium alloy by laser shock peening[J]. Chinese J Lasers, 40, 0803006(2013).
[8] Peyre P, Fabbro R, Merrien P et al. Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour[J]. Materials Science and Engineering A, 210, 102-113(1996). http://www.sciencedirect.com/science/article/pii/0921509395100849
[9] Fabbro R, Fournier J, Ballard P et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 68, 775-784(1990). http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=5088191
[11] Yan Qian, Shu Xinzhu, Zhu Feixia et al. A comparative study on quasistatic mechanical properties of four kinds of typical microstructure of TC11 titanium alloy at room temperature[J]. Journal of Yunnan University (Natural Sciences), 38, 99-104(2016).
[12] Ballard P, Fournier J, Fabbro R et al. Residual-stresses induced by laser-shocks[J]. Journal de Physique IV, 1, 487-494(1991). http://www.researchgate.net/publication/45245921_RESIDUAL_STRESSES_INDUCED_BY_LASER-SHOCKS
[13] Schneider M S, Kad B, Kalantar D H et al. Laser shock compression of copper and copper-aluminum alloys[J]. International Journal of Impact Engineering, 32, 473-507(2005). http://www.sciencedirect.com/science/article/pii/S0734743X05000783
[14] Sokol D W, Clauer A H, Dulaney J L et al. Applications of laser peening to titanium alloys[C]. Conference on Lasers and Electro-Optics/Quantum Electronics and Laser Science and Photonic Applications(2005).
[15] Xu Shidong, Ren Xudong, Zhou Wangfan et al. Research of cell-grain refinement and dislocation strengthening of laser shock processing on GH2036 alloy[J]. Chinese J Lasers, 43, 0103001(2016).
[16] Zhang Y K, Lu J Z, Ren X D et al. Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engine blades manufactured by LY2 aluminum alloy[J]. Materials & Design, 30, 1697-1703(2009). http://www.sciencedirect.com/science/article/pii/S0261306908003555
[17] Luo K Y, Lu J Z, Zhang Y K et al. Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel[J]. Materials Science and Engineering A, 528, 4783-4788(2011). http://www.sciencedirect.com/science/article/pii/S0921509311003248
[18] Thorslund T, Kahlen F J, Kar A. Temperatures, pressures and stresses during laser shock processing[J]. Optics and Lasers in Engineering, 39, 51-71(2003). http://www.sciencedirect.com/science/article/pii/S0143816602000404
