[1] Fan X L, Li D J, Lv B W et al. Advances in the fundamentals of the manufacture of industrial gas turbine[J]. China Basic Science, 20, 32-40(2018).
[2] Pattnaik S, Karunakar D B, Jha P K. Developments in investment casting process: a review[J]. Journal of Materials Processing Technology, 212, 2332-2348(2012).
[3] Wang T J, Fan X L, Sun G et al. The stresses and cracks in thermal barrier coating system: a review[J]. Chinese Journal of Solid Mechanics, 37, 477-517(2016).
[4] Cao L M, Xue M. Research and development tendency of near net-shape investment casting technology for superalloy turbine airfoilsrevoke[J]. Foundry, 70, 147-154(2021).
[6] Han J C, Dutta S, Ekkad S[M]. Gas turbine heat transfer and cooling technology(2012).
[7] Cao L M, Yang Y W, Cai G H et al. Alumina- base ceramic core AC-1 for single crystal blades[J]. Journal of Materials Engineering, 25(1997).
[8] Xue M, Cao L M. Microstructure and properties of alumina based ceramic cores AC-2 for single crystal blades[J]. Journal of Materials Engineering, 30(2002).
[9] Bae C J, Halloran J W. Integrally cored ceramic mold fabricated by ceramic stereolithography[J]. International Journal of Applied Ceramic Technology, 8, 1255-1262(2011).
[10] Tan C L, Weng F, Sui S et al. Progress and perspectives in laser additive manufacturing of key aeroengine materials[J]. International Journal of Machine Tools and Manufacture, 170, 103804(2021).
[11] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).
[12] Qin Y L, Sun B H, Zhang H et al. Development of selective laser melted aluminum alloys and aluminum matrix composites in aerospace field[J]. Chinese Journal of Lasers, 48, 1402002(2021).
[13] Sun C B, Shang W, Zhou J H et al. Integrated application of laser rapid prototyping and traditional investment casting technology[J]. Aeronautical Manufacturing Technology, 58, 48-51(2015).
[14] Tang S Y, Fan Z T, Zhao H P et al. Layered extrusion forming: a simple and green method for additive manufacturing ceramic core[J]. The International Journal of Advanced Manufacturing Technology, 96, 3809-3819(2018).
[15] Steen W M, Mazumder J[M]. Laser material processing(2010).
[16] Wei Q, Zhong J W, Xu Z L et al. Microstructure evolution and mechanical properties of ceramic shell moulds for investment casting of turbine blades by selective laser sintering[J]. Ceramics International, 44, 12088-12097(2018).
[17] Li C H, Hu L, Zou Y et al. Fabrication of Al2O3-SiO2 ceramics through combined selective laser sintering and SiO2-sol infiltration[J]. International Journal of Applied Ceramic Technology, 17, 255-263(2020).
[18] Chen X Y, Xiao L, Yu J B et al. Review of ceramic cores in investment casting of superalloy hollow blades[J]. Foundry, 65, 868-873(2016).
[19] Yves-Christian H, Jan W, Wilhelm M et al. Net shaped high performance oxide ceramic parts by selective laser melting[J]. Physics Procedia, 5, 587-594(2010).
[20] Wu L, He J, Zeng H et al. Research progress of manufacturing process on silica-based ceramic core[J]. Dongfang Turbine, 54-59(2016).
[21] Wang F, Li F, Yu J B et al. Research status on removal technology of ceramic core for hollow blades[J]. Materials China, 38, 264-270(2019).
[22] Wang L G, Zuo B, Zhu G Z et al. Effect of porosity on the properties of the soluble alumina based ceramic core[J]. Special Casting & Nonferrous Alloys, 32, 450-452(2012).
[25] Liu K, Shi Y S, Li C H et al. Indirect selective laser sintering of epoxy resin-Al2O3 ceramic powders combined with cold isostatic pressing[J]. Ceramics International, 40, 7099-7106(2014).
[26] Yan C Z, Shi Y S, Yang J S et al. Preparation and selective laser sintering of nylon-12 coated metal powders and post processing[J]. Journal of Materials Processing Technology, 209, 5785-5792(2009).
[27] Chen A N, Chen J Y, Wu J M et al. Porous mullite ceramics with enhanced mechanical properties prepared by SLS using MnO2 and phenolic resin coated double-shell powders[J]. Ceramics International, 45, 21136-21143(2019).
[28] Wu X F, Li X, Xu X Q et al. Fabrication and properties of silica-based ceramic cores modified by mullite powders with different particle sizes[J]. Journal of Aeronautical Materials, 41, 128-133(2021).
[29] Li X, Niu S X, Yao J S et al. Effect of Al powder on property and microstructure of silica-based ceramic core[J]. Journal of Inorganic Materials, 34, 207-212(2019).
[30] Zhang J B, Yu J B, Li Q et al. Effect of CaO and SiO2 on the properties of Y2O3-based ceramic core materials[J]. Journal of Asian Ceramic Societies, 9, 1103-1113(2021).
[31] Shishkovsky I, Yadroitsev I, Bertrand P et al. Alumina-zirconium ceramics synthesis by selective laser sintering/melting[J]. Applied Surface Science, 254, 966-970(2007).
[32] Yang Z G, Li K L, Ma S Q et al. Preparation, mechanical, and leaching properties of CaZrO3 ceramic cores[J]. International Journal of Applied Ceramic Technology, 18, 1490-1497(2021).
[33] Xie R D, Zhu J W, Zhang H et al. Review of detection, analysis and control of temperature field in laser additive manufacturing[J]. Laser & Optoelectronics Progress, 57, 050003(2020).
[34] Fan Z T, Huang N Y. Mechanism of coated sand mold(core) hardened by selective laser sintering[J]. Journal of Huazhong University of Science and Technology, 29, 60-62(2001).
[35] Enneti R K, Park S J, German R M et al. Review: thermal debinding process in particulate materials processing[J]. Materials and Manufacturing Processes, 27, 103-118(2012).
[36] Shahzad K, Deckers J, Kruth J P et al. Additive manufacturing of alumina parts by indirect selective laser sintering and post processing[J]. Journal of Materials Processing Technology, 213, 1484-1494(2013).
[37] Lee I. Densification of porous Al2O3-Al4B2O9 ceramic composites fabricated by SLS process[J]. Journal of Materials Science Letters, 18, 1557-1561(1999).
[38] Lee I. Infiltration of alumina sol into SLS processed porous Al2O3-Al4B2O9 ceramic composites[J]. Journal of Materials Science Letters, 20, 223-226(2001).
[39] Zheng W, Wu J M, Chen S et al. Fabrication of high-performance silica-based ceramic cores through selective laser sintering combined with vacuum infiltration[J]. Additive Manufacturing, 48, 102396(2021).
[40] Wei Q, Xu Z L, Xu Q Y et al. Effect of sintering temperature on microstructure and mechanical behavior of alumina-based ceramic shell by SLS[J]. Journal of Aeronautical Materials, 39, 10-15(2019).
[41] Pan Y, Li H, Liu Y S et al. Effect of holding time during sintering on microstructure and properties of 3D printed alumina ceramics[J]. Frontiers in Materials, 7, 54(2020).
[42] Chen Z W, Li Z Y, Li J J et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society, 39, 661-687(2019).
[43] Chen F, Zhu H, Wu J M et al. Preparation and biological evaluation of ZrO2 all-ceramic teeth by DLP technology[J]. Ceramics International, 46, 11268-11274(2020).
[44] Wu H H, Li D C, Tang Y P et al. Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting[J]. Journal of Materials Processing Technology, 209, 5886-5891(2009).
[45] Gentry S P, Halloran J W. Depth and width of cured lines in photopolymerizable ceramic suspensions[J]. Journal of the European Ceramic Society, 33, 1981-1988(2013).
[46] Gentry S P, Halloran J W. Light scattering in absorbing ceramic suspensions: effect on the width and depth of photopolymerized features[J]. Journal of the European Ceramic Society, 35, 1895-1904(2015).
[47] Zocca A, Colombo P, Gomes C M et al. Additive manufacturing of ceramics: issues, potentialities, and opportunities[J]. Journal of the American Ceramic Society, 98, 1983-2001(2015).
[48] Guo L, Yang J, Feng Y B et al. Preparation and properties of AlN ceramic suspension for non-aqueous gel casting[J]. Ceramics International, 42, 8066-8071(2016).
[49] Zhou W Z, Li D C, Chen Z W. Laser curing characterics of aqueous ceramic suspension and selectance for process parameters[C], 499-504(2009).
[50] Zhou W Z, Li D C, Chen Z W et al. Curing behaviors of ceramic suspension in stereolithography and its engineering applications[J]. Aeronautical Manufacturing Technology, 53, 38-42(2010).
[51] Cai K, Huang Y, Yang J L. Gelcasting of alumina with low-toxicity HEMA system[J]. Journal of Inorganic Materials, 18, 343-347(2003).
[52] Xu H X, Qiu T, Yang J et al. Gel-casting of fine zirconia using DMAA gel system[J]. Journal of Inorganic Materials, 26, 1105-1110(2011).
[53] Wang Y M, Liu J, Wang C et al. Influence of pressure on properties of 95 alumina ceramics prepared by gelcasting forming[J]. Bulletin of the Chinese Ceramic Society, 31, 1223-1227(2012).
[54] Xiang J H, Huang Y, Xie Z P. Study of gel-tape-casting process of ceramic materials[J]. Materials Science and Engineering: A, 323, 336-341(2002).
[55] Zhang L, Yao Q, Yuan Z T et al. Ammonium citrate assisted surface modification and gel casting of YAG transparent ceramics[J]. Ceramics International, 44, 21921-21927(2018).
[56] Dendukuri D, Panda P, Haghgooie R et al. Modeling of oxygen-inhibited free radical photopolymerization in a PDMS microfluidic device[J]. Macromolecules, 41, 8547-8556(2008).
[57] Tumbleston J R, Shirvanyants D, Ermoshkin N et al. Continuous liquid interface production of 3D objects[J]. Science, 347, 1349-1352(2015).
[58] Yang S, Zhang D S, Xue J Q et al. Oxygen inhibition study on surface of ITO green body prepared by gel-casting with low toxicity system[J]. Development and Application of Materials, 35, 54-58(2020).
[59] Dong B C, Zhang G. Fabrication and properties of ultra-lightweight SiC mirror[J]. Optics and Precision Engineering, 23, 2185-2191(2015).
[60] Yang L X, Guo L P, Han X G. Study on filling ability of gelcasting alumina ceramic slurry[J]. Foundry Technology, 34, 587-589(2013).
[61] Yang Q, Lu Z L, Li Z F et al. Gelcasting filling for small structure of hollow turbine blade ceramic mold[J]. Journal of Xi’an Jiaotong University, 50(2016).
[62] Hinczewski C, Corbel S, Chartier T. Ceramic suspensions suitable for stereolithography[J]. Journal of the European Ceramic Society, 18, 583-590(1998).
[63] Zhang K Q, Xie C, Wang G et al. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing[J]. Ceramics International, 45, 203-208(2019).
[64] Liu Y, Cheng L J, Li H et al. Formation mechanism of stereolithography of Si3N4 slurry using silane coupling agent as modifier and dispersant[J]. Ceramics International, 46, 14583-14590(2020).
[65] Berg J C[M]. An introduction to interfaces and colloids: the bridge to nanoscience(2009).
[66] Bae C J, Halloran J W. A segregation model study of suspension-based additive manufacturing[J]. Journal of the European Ceramic Society, 38, 5160-5166(2018).
[67] Bae C J, Ramachandran A, Halloran J W. Quantifying particle segregation in sequential layers fabricated by additive manufacturing[J]. Journal of the European Ceramic Society, 38, 4082-4088(2018).
[68] Chen S, Wang C S, Zheng W et al. Effects of particle size distribution and sintering temperature on properties of alumina mold material prepared by stereolithography[J]. Ceramics International, 48, 6069-6077(2022).
[69] Schwarzer E, Götz M, Markova D et al. Lithography-based ceramic manufacturing (LCM)-viscosity and cleaning as two quality influencing steps in the process chain of printing green parts[J]. Journal of the European Ceramic Society, 37, 5329-5338(2017).
[70] Hull C W, Newell K J. Recoating system for using high viscosity build materials in solid freeform fabrication[P].
[71] Wang X F, Wang R C, Peng C Q et al. Solvent drying of gelcasting green bodies[J]. The Chinese Journal of Nonferrous Metals, 23, 3374-3380(2013).
[72] Li Y G, Wang Z Y. Influences of different drying methods on the dehydration process of alumina green body fabricated by gel-casting[J]. Shandong Ceramics, 34, 26-28(2011).
[73] Liu F, Lu Z L, Li Z F et al. Freeze-drying defect control of alumina-based ceramic body prepared with gel casting technology[J]. Journal of Xi’an Jiaotong University, 48(2014).
[74] Bai S Z, Lu Z L, Cao J W et al. Dimensional accuracy control of gelcast ceramic green body during drying process with solid desiccant[J]. Journal of Xi’an Jiaotong University, 51, 135-139(2017).
[75] Pikal M J, Shah S, Senior D et al. Physical chemistry of freeze-drying: measurement of sublimation rates for frozen aqueous solutions by a microbalance technique[J]. Journal of Pharmaceutical Sciences, 72, 635-650(1983).
[76] Scherer G W. Theory of drying[J]. Journal of the American Ceramic Society, 73, 3-14(1990).
[77] Chen Y, Lu Z L, Miao K et al. Researches on the pyrolyzing strength of gelcasting Al2O3-based ceramic molds for double-wall blade[J]. Journal of the American Ceramic Society, 102, 7564-7574(2019).
[78] Hua S B, Yuan X, Wu J M et al. Digital light processing porous TPMS structural HA & akermanite bioceramics with optimized performance for cancellous bone repair[J]. Ceramics International, 48, 3020-3029(2022).
[79] Bae C J, Halloran J W. Influence of residual monomer on cracking in ceramics fabricated by stereolithography[J]. International Journal of Applied Ceramic Technology, 8, 1289-1295(2011).
[80] Johansson E, Lidström O, Johansson J et al. Influence of resin composition on the defect formation in alumina manufactured by stereolithography[J]. Materials, 10, 138(2017).
[81] Li H, Liu Y S, Liu Y S et al. Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics[J]. Materials Characterization, 168, 110548(2020).
[82] Zhou M P, Liu W, Wu H D et al. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography-optimization of the drying and debinding processes[J]. Ceramics International, 42, 11598-11602(2016).
[83] Li H, Liu Y S, Liu Y S et al. Influence of vacuum debinding temperature on microstructure and mechanical properties of three-dimensional-printed alumina via stereolithography[J]. 3D Printing and Additive Manufacturing, 7, 8-18(2020).
[84] Zheng W, Wu J M, Chen S et al. Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography[J]. Journal of Advanced Ceramics, 10, 1381-1388(2021).
[85] Li H, Liu Y S, Liu Y S et al. Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum[J]. Journal of the European Ceramic Society, 40, 4825-4836(2020).
[86] Manière C, Kerbart G, Harnois C et al. Modeling sintering anisotropy in ceramic stereolithography of silica[J]. Acta Materialia, 182, 163-171(2020).
[87] Xu D Y, Li D C, Wu H H et al. Effect of yttrium aluminum garnet on high-temperature properties of alumina-based ceramic cores[J]. Journal of Aeronautical Materials, 31, 67-71(2011).
[88] Liu T, Lu Z L, Miao K et al. High-temperature strengthening manufacturing of alumina-based ceramic molds used for hollow turbine blades[J]. Acta Aeronautica et Astronautica Sinica, 35, 2072-2080(2014).
[89] Lu Z L, Jiang B, Zhou J P et al. Defects control of manufacturing ceramic mold of hollow turbine blade based on stereo lithography[J]. Journal of Mechanical Engineering, 50, 111-117(2014).
[90] Wei T, Shi J, Luo M Y et al. Silicon-based ceramic core slurry and application thereof[P].
[91] Xu W L, Lu Z L, Tian G Q et al. Fabrication of single-crystal superalloy hollow blade based on integral ceramic mold[J]. Journal of Materials Processing Technology, 271, 615-622(2019).
[92] Li H, Hu K H, Liu Y S et al. Improved mechanical properties of silica ceramic cores prepared by 3D printing and sintering processes[J]. Scripta Materialia, 194, 113665(2021).
[93] Li H, Liu Y S, Liu Y S et al. Influence of sintering temperature on microstructure and mechanical properties of Al2O3 ceramic via 3D stereolithography[J]. Acta Metallurgica Sinica (English Letters), 33, 204-214(2020).
