[1] A Mohan, A Malshe, S Aravamudhan, et al.. Piezoresistive MEMS pressure sensor and packaging for harsh oceanic environment [C]. Electronic Components and Technology Conference, 2004, 1: 948-950.
[2] N Jithendra, J Palasagaram, R Ramadoss. MEMS-capacitive pressure sensor fabricated using printed-circuit-processing techniques [J]. Sensors Journal, 2006, 6(6): 1374-1375.
[3] H Chiang, T Chou, C Lin, et al.. Investigation of the hysteresis phenomenon of a silicon-based piezoresistive pressure sensor [C]. Microsystems, Packaging, Assembly and Circuits Technology, 2007. 165-168.
[4] J Zhou, S Dasgupta, H Kobayashi, et al.. Optically interrogated MEMS pressure sensors for propulsion applications [J]. Optical Engineering, 2001, 40(4): 598-604.
[5] X Wang, B Li, Z Xiao, et al.. An ultra-sensitive optical MEMS sensor for partial discharge detection [J]. Journal of Micromechanics and Micro Engineering, 2005, 15(3): 521-527.
[6] Y Ge, M Wang, H Yan. Optical MEMS pressure sensor based on a mesa-diaphragm structure [J]. Opt Express, 2008, 16(26): 21746-21752.
[7] W Wang, N Wu, Y Tian, et al.. Miniature all-silica optical fiber pressure sensor with an ultrathin uniform diaphragm [J]. Opt Express, 2010, 18(9): 9006-9014.
[9] Zhao Ziwen, Wang Weiyu, Zhang Min, et al.. A new temperature compensation method by optimizing the structure of extrinsic Fabry-Perot interferometric optical fiber sensor [J]. Laser & Optoelectronics Progress, 2013, 50(9): 090605.
[10] Zhu Jiali, Wang Ming, Cai Dongyan, et al.. A fiber Fabry-Perot micro pressure sensor [J]. Acta Optica Sinica, 2014, 34(4): 0428002.
[11] H Chau, K Wise. Scaling limits in batch-fabricated silicon pressure sensors [J]. Transactions on Electron Devices, 1987, 34(4): 850-858.
[12] W Eaton, F Bitsie, J Smith, et al.. A new analytical solution for diaphragm deflection and its application to a surface-micro machined pressure sensor [C]. International Conference on Modeling and Simulation of Microsystems, 1999. 19-21.
[13] S Mack, H Baumann, U Gosele, et al.. Analysis of bonding-related gas enclosure in micro machined cavities sealed by silicon wafer bonding [J]. Journal of the Electrochemical Society, 1997, 144(3): 1106-1111.
[14] R Schellin, G Hess, W Kühnel, et al.. Measurements of the mechanical behaviour of micromachined silicon and silicon-nitride membranes for microphones, pressure sensors and gas flow meters [J]. Sensors and Actuators A: Physical, 1994, 41(1): 287-292.
[15] Xu Jinquan. The Mechanics of Interface [M]. Beijing: Science Press, 2006. 187-188.
[16] J A Dziuban. Bonding in Microsystem Technology [M]. New York: Springer, 2007. 170-179.
[17] S Timoshenko, S Woinowsky-Krieger. Theory of Plates and Shells [M]. New York: McGraw-hill, 1959. 391-393.
[18] J Yin, T Liu, J Jiang, et al.. Self-referenced residual pressure measurement method for fiber-optic pressure sensor chip[J]. Photon Technol Lett, 2014, 26(10): 957-960.
[19] R Douglas, S Sparks, A Massoud, et al.. Chip-level vacuum packaging of micromachines using nanogetters [J]. Transactions on Advanced Packaging, 2003, 26(3): 277-282.
[20] L Byeungleul, S Seonho, C Kukjin. A study on wafer level vacuum packaging for MEMS devices [J]. Journal of Micromechanics and Micro Engineering, 2003, 13(5): 663-669.
[21] Jiang Junfeng, Wu Fan, Liu Tiegen, et al.. Research on LED effect in spatial scanning optical fiber Fabry-Perot sensing demodulation system [J]. Acta Optica Sinica, 2014, 34(2): 0223002.
[22] J Jiang, S Wang, T Liu, et al.. A polarized low-coherence interferometry demodulation algorithm by recovering the absolute phase of a selected monochromatic frequency [J]. Opt Express, 2012, 20(16): 18117-18126.
