Optical Oxygen Sensors With Improved Lifetime Incorporating Titania Beads and Polydimethylsiloxane Coatings

Emily CIRULNICK; Haopeng ZHANG; David KLOTZKIN

doi:10.1007/s13320-020-0608-z

[1] J. Bacon and J. N. Demas, “Determination of oxygen concentrations by luminescence quenching of a polymer-immobilized transition-metal complex,” Analytical Chemistry, 1987, 59(23): 2780–2785.

[2] T. Yeh, C. Chu, and Y. Lo, “Highly sensitive optical fiber oxygen sensor using Pt (II) complex embedded in sol-gel matrices,” Sensors and Actuators B: Chemical, 2006, 119(2): 701–707.

[3] C. Chu, Y Lo, and T. Sung, “Review on recent developments of fluorescent oxygen and carbon dioxide optical fiber sensors,” Photonic Sensors, 2011, 1(3): 234–250.

[4] Y. Cai, A. Smith, J. Shinar, and R. Shinar, “Data analysis and aging in phosphorescent oxygen-based sensors,” Sensors and Actuators B: Chemical, 2010, 146(1): 14–22.

[5] M. Ratterman, “Multi-analyte lab on a chip detection utilizing optical and electro-chemical methods,” PhD dissertation, University of Cincinnati, Cincinnati, Ohio, America, 2015.

[6] C. Chu and T. Lin, “A new portable optical sensor for dual sensing of temperature and oxygen,” Sensors and Actuators B: Chemical, 2014, 202: 508–515.

[7] P. Douglas and K. Eaton, “Response characteristics of thin film oxygen sensors, Pt and Pd octaethylporphyrins in polymer films,” Sensors and Actuators B: Chemical, 2002, 82(2–3): 200–208.

[8] W. Cui, R. Liu, E. Manna, J. Park, F. Fungura, J. Shinar, et al., “Oxygen and relative humidity monitoring with films tailored for enhanced photoluminescence,” Analytica Chimica Acta, 2015, 853: 563–571.

[9] S. Ji, W. Wu, Y. Wu, T. Zhao, F. Zhou, Y. Yang, et al., “Real-time monitoring of luminescent lifetime changes of PtOEP oxygen sensing film with LED/photodiode-based time-domain lifetime device,” Analyst, 2009, 134(5): 958–965.

[10] A. Smith, Y. Cai, S. Vengasandra, R. Shinar, and J. Shinar, “Advances toward commercialization of a new generation of low cost (O) LED-based dissolved oxygen and bioanalyte monitors,” Organic Semiconductors in Sensors and Bioelectronics III, 2010, 7779: 77790.

[11] J. McDonald, J. Cooper, D. Duffy, J. Anderson, D. Chiu, H. Wu, et al., “Fabrication of microfluidic systems in poly (dimethylsiloxane),” Electrophoresis: An International Journal, 2000, 21(1): 27–40.

[12] Y. Cai, R. Shinar, Z. Zhou, and J. Shinar, “OLED-based sensor array for simultaneous monitoring of multiple analytes,” Organic-Based Chemical and Biological Sensors, 2007, 6659: 665907.

[13] Z. Zhou, R. Shinar, A. Allison, and J. Shinar, “Enhanced photoluminescence of oxygen sensing films through doping with high dielectric constant particles,” Advanced Functional Materials, 2007, 17(17): 3530–3537.

[14] Y. Qing, C. Yang, Y. Sun, Y. Zheng, X. Wang, Y. Shang, et al., “Facile fabrication of superhydrophobic surfaces with corrosion resistance by nanocomposite coating of TiO2 and polydimethylsiloxane,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015, 484: 471–477.

[15] F. Xu, T. Wang, J. Bohling, A. Maurice, H. Chen, L. Wu, et al., “Extended hydrophobicity and self-cleaning performance of waterborne PDMS/TiO2 nanocomposite coatings under accelerated laboratory and outdoor exposure testing,” Journal of Coatings Technology and Research, 2018, 15(5): 1025–1034.

[16] S. Yousefi, P. Tabatabaei-Panah, and J. Seyfi, “Emphasizing the role of surface chemistry on hydrophobicity and cell adhesion behavior of polydimethylsiloxane/TiO2 nanocomposite films,” Colloids and Surfaces B: Biointerfaces, 2018, 167: 492–498.

[17] W. Zhang, G. S. Ferguson, and S. Tatic-Lucic, “Elastomer-supported cold welding for room temperature wafer-level bonding,” in 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest, Netherlands, Jan. 25–29, 2004, pp. 741–744.

[18] A. Banerjee, A. Pais, I. Papautsky, and D. Klotzkin, “A polarization isolation method for high-sensitivity, low-cost on-chip fluorescence detection for microfluidic lab-on-a-chip,” IEEE Sensors Journal, 2008, 8(5): 621–627.

[19] A. Pais, A. Banerjee, D. Klotzkin, and I Papautsky, “High-sensitivity, disposable lab-on-a-chip with thin-film organic electronics for fluorescence detection,” Lab on a Chip, 2008, 8(5): 794–800.

[20] L. Shen, M Ratterman, D. Klotzkin, and I. Papautsky, “A CMOS optical detection system for point-of-use luminescent oxygen sensing,” Sensors and actuators B: Chemical, 2011, 155(1): 430–435.

[21] R. Herne, J. Brocas, and E. Donckt, “The response time of optical sensors based on luminescence quenching,” Analytica Chimica Acta, 1998, 364(1–3): 131–141.

[22] L. Shen, “Portable multiplexed optical detection for point-of-care,” PhD dissertation, University of Cincinnati, Cincinnati, OH, America, 2013.