• Infrared and Laser Engineering
  • Vol. 47, Issue 1, 122002 (2018)
Gao Xiaodan1、*, Peng Jiankun2, and Lv Dajuan2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: 10.3788/irla201847.0122002 Cite this Article
    Gao Xiaodan, Peng Jiankun, Lv Dajuan. Optical fiber temperature sensor based on Fabry-Perot coating interference[J]. Infrared and Laser Engineering, 2018, 47(1): 122002 Copy Citation Text show less
    References

    [1] Jun He, Liao Changrui, Yang Kaiming, et al. High-sensitivity temperature sensor based on a coated single-mode fiber loop[J]. Journal of Lightwave Technology, 2015, 33(19): 4019-4026.

    [2] Jinesh Mathew, Oliver Schneller, Dimitrios Polyzos, et al. In-fiber fabry-perot cavity sensor for high-temperature applications[J]. Journal of Lightwave Technology, 2015, 33(12): 2419-2425.

    [3] Trung D Vo, He Jiakun, Eric Magi, et al. Chalcogenide fiber-based distributed temperature sensor with sub-centimeter spatial resolution and enhanced accuracy[J]. Optics Express, 2014, 22(2): 1560-1568.

    [4] Liu Tao, Zhang Wenping, Chen Huifang, et al. Reduction of system noise in distributed optical fiber Raman temperature sensor by Kalman filter[J]. Infrared and Laser Engineering, 2014, 43(5): 1643-1647. (in Chinese)

    [5] Xu Ning, Dai Ming. Design of distributed optical fiber sensor for temperature and pressure measurement[J]. Chinese Optics, 2015, 8(4): 629-635. (in Chinese)

    [6] Li Yuhua, Yang Minwei, Liao Changrui, et al. Prestressed fiber bragg grating with high temperature stability[J]. IEEE Journal Light-wave Technology, 2011, 29(10): 1555-1559.

    [7] Jiang Shanchao, Sui Qingmei, Wang Jing, et al. FBG turbine flow rate sensor for acquiring flow rate and temperature simultaneously[J]. Optics and Precision Engineering, 2014, 22(10): 2611-2616. (in Chinese)

    [8] Xu Guoquan, Xiong Daiyu. Applications of fiber bragg grating sensing technology in engineering[J]. Chinese Optics, 2013, 6(3): 306-317. (in Chinese)

    [9] Li Lijing, Wang Ying, Yang Hui, et al. Control of temperature dynamic characteristics of SFS light source[J]. Optics and Precision Engineering, 2014, 22(3): 539-546. (in Chinese)

    [10] Huang Chujia, Lee Dongwen, Dai Jixiang, et al. Fabrication of high-temperture sensor based on dielectric multilayer film on Sapphire fiber tip[J]. Sensors and Actuators, 2015, A232: 99-102.

    [11] Lee Dongwen, Tian Zhipeng, Dai Jixiang, et al. Sapphire fiber high-temperature tip sensor with multilayer coating[J]. IEEE Photonics Technology Letters, 2015, 27(7): 741-743.

    [12] Wang Siyuan, Lou Shuqin, Liang Sheng, et al. Pattern recognition method of fiber distributed disturbance sensing system based on M-Z interferometer [J]. Infrared and Laser Engineering, 2014, 43(8): 2613-2618. (in Chinese)

    [13] Wang Jiajun, Evan M Lally, Wang Xiaoping, et al. ZrO2 thin-film-based sapphire fiber temperature sensor[J]. Applied Optics, 2012, 51(12): 2129-2134.

    [14] Dominik Martin, Matthias Grube, Wenke Weinreich. Macroscopic and microscopic electrical characterizations of high-k ZrO2 and ZrO2/Al2O3/ZrO2 metal-insulator-metal structures[J]. Journal of Vacuum Science & Technology, 2011, B29: 01AC02.

    CLP Journals

    [1] Yang Yang, Zhao Yong, Lv Riqing, Liu Bing, Zheng Hongkun, Yang Yang, Wang Mengjun, Cui Mengjun, Yang Huali. Research and development of a multi-parameter integrated optical fiber sensor and calibration system[J]. Infrared and Laser Engineering, 2019, 48(10): 1013006

    Gao Xiaodan, Peng Jiankun, Lv Dajuan. Optical fiber temperature sensor based on Fabry-Perot coating interference[J]. Infrared and Laser Engineering, 2018, 47(1): 122002
    Download Citation