Anisotropic Calculation of Mechanical Property of GaAs Crystal

Kangjia DONG; Chen JIANG; Shaobin REN; Xiaohu LANG; Rui GAO; Hui YE

doi:10.15541/jim20200507

[1] K WASMER, C BALLIF, P CÉDRIC et al. Dicing of gallium arsenide high performance laser diodes for industrial applications: part I: scratching operation. Journal of Materials Processing Technology, 198, 114-121(2008).

[2] K WASMER, C BALLIF, C POUVREAU et al. Dicing of gallium- arsenide high performance laser diodes for industrial applications: Part II. cleavage operation. Journal of Materials Processing Technology, 198, 105-113(2008).

[3] K WASMER, C BALLIF, R GASSILLOUD et al. Cleavage fracture of brittle semiconductors from the nanometre to the centimetre scale. Advanced Engineering Materials, 7, 309-317(2005).

[4] C JIANG, L HUANG J, Y JIANG Z et al. Estimation of energy savings when adopting ultrasonic vibration-assisted magnetic compound fluid polishing. International Journal of Precision Engineering and Manufacturing-Green Technology, 8, 1-11(2021).

[5] C JIANG, T WU, H YE et al. Estimation of energy and time savings in optical glass manufacturing when using ultrasonic vibration- assisted grinding. International Journal of Precision Engineering and Manufacturing-Green Technology, 6, 1-9(2019).

[6] R GAO, C JIANG, H LANG X et al. Experimental investigation of influence of scratch features on GaAs cleavage plane during cleavage processing using a scratching capability index. International Journal of Precision Engineering and Manufacturing-Green Technology(2020).

[7] Y CHEN J, F DING, C LUO X et al. Fundamental study of ductile- regime diamond turning of single crystal gallium arsenide. Precision Engineering, 62, 71-82(2019).

[8] X XU L, Q KONG L, W ZHAO H et al. Mechanical behavior of undoped n-Type GaAs under the indentation of berkovich and Flat- Tip indenters. Materials(2019).

[9] S PONRAJ J, E BUFFAGNI, G DEIVASIGAMANI et al. Studies of nanoindentation and residual stress analysis of Ge/GaAs epilayers. Semiconductor Science and Technology(2015).

[10] K HJORT, J SODERKVIST, A SCHWEITZ J. Gallium arsenide as a mechanical material. Journal of Micromechanics & Microengineering, 4, 1-13(1994).

[11] A HOPCROFT M, D NIX W, W KENNY T. What is the Young's modulus of silicon?. Journal of Microelectromechanical Systems, 19, 229-238(2010).

[12] T TING T C. On anisotropic elastic materials for which Young’s modulus E(n) is independent of n or the shear modulus G(n, m) is independent of n and m. Journal of Elasticity, 81, 271-292(2005).

[13] M KNOWLES K, R HOWIE P. The directional dependence of elastic stiffness and compliance shear coefficients and shear moduli in cubic materials. Journal of Elasticity, 120, 87-108(2015).

[14] W. A BRANTLEY. Calculated elastic constants for stress problems associated with semiconductor devices. Journal of Applied Physics, 44, 534(1973).

[15] H LUAN X, B QIN H, M LIU F et al. The mechanical properties and elastic anisotropies of cubic Ni₃Al from first principles calculations. Crystals, 8, 307-309(2018).

[16] K RYSAEVA L, A BAIMOVA Y, V DMITRIEV S et al. Elastic properties of diamond-like phases based on carbon nanotubes. Diamond and Related Materials, 97, 107411(2019).

[17] L LIU J, H YE L, W ZHOU Y et al. Anisotropy of elasticity of a Ni base single crystal superalloy. Acta Metallurgica Sinica, 56, 855-862(2020).

[18] F BERGNER, M SCHAPER, R HAMMER et al. Indentation response of single-crystalline GaAs in the nano-, micro-, and macroregime. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), 98, 735-741(2007).

[19] J CHENG, B NIU Y, H WANG J et al. Analysis of anisotropic mechanical properties of monocrystalline silicon callow. Journal of Harbin Institute of Technology, 51, 16-23(2019).