Research on Three-Dimensional Printing Modeling Visualization of Multi-Material Parts

Zhenghao Ge; Hao Chen; Congrui Lei

doi:10.3788/LOP57.231403

[1] Lu B H. Additive manufacturing: current situation and future[J]. China Mechanical Engineering, 31, 19-23(2020).

[2] Wang S, Chen NF, Chen C S et al. Finite element-based approach to modeling heterogeneous objects[J]. Finite Elements in Analysis and Design, 45, 592-596(2009). http://dl.acm.org/citation.cfm?id=1551528

[3] Watanabe I, Yamanaka A. Voxel coarsening approach on image-based finite element modeling of representative volume element[J]. International Journal of Mechanical Sciences, 150, 314-321(2019).

[4] Todd R J. Analysis of functionally graded material object representation methods[D]. Cambridge: Massachusetts Institute of Technology(2000).

[5] Liu N. Research on direct visibility testing and shadow rendering for point-based models[D]. Nanjing: Nanjing Normal University(2011).

[6] Kumar V, Dutta D. An approach to modeling & representation of heterogeneous objects[J]. Journal of Mechanical Design, 120, 659-667(1998).

[7] Siu Y K, Tan S T. ‘Source-based’ heterogeneous solid modeling[J]. Computer-Aided Design, 34, 41-55(2002).

[8] Jia L, Xu J, Li S F et al. Reaction kinetics of Cu-Ni and B4C in Cu-Ni alloy under solid-state sintering[J]. Materials Science and Technology, 36, 759-764(2020).

[9] Xie R D, Zhu J W, Zhang H et al. Review of detection, analysis and control of temperature field in laser additive manufacturing[J]. Laser & Optoelectronics Progress, 57, 050003(2020).

[10] Yao Y S, Wang J, Chen Q B et al. Research status of defects and defect treatment technology for laser additive manufactured products[J]. Laser & Optoelectronics Progress, 56, 100004(2019).

[11] Pu Y S, Wang B Q, Zhang L G. Metal 3D printing technology[J]. Surface Technology, 47, 78-84(2018).

[12] Yang Y Q, Wu S B, Zhang Y et al. Application progress and prospect of fiber laser in metal additive manufacturing[J]. Chinese Journal of Lasers, 47, 0500012(2020).

[13] Liu Z Q, Xu G J, Ma R X et al. Properties of TiAl alloy prepared by additive manufacturing with laser coaxial powder feeding[J]. Chinese Journal of Lasers, 46, 0302016(2019).

[14] Huang J F. Research on reverse modeling method of different surface features based on point cloud data[J]. Journal of North China Institute of Science and Technology, 17, 92-97(2020).