Analysis of Micromorphology and Mechanical Properties of Laser Cladding Nickel/Tin-Based Babbitt Alloy

Tongzhou Xu; Chen Zhang; Changqing Sun; Haitao Chen; Ling Xu; Xiuhong Pan

doi:10.3788/LOP57.031403

[1] Qin Z, Zhao Z W, Wei H D et al. Research progress and preparation techniques of Babbitt metal[J]. Hot Working Technology, 45, 10-14(2016).

[2] Fan J L, Liu Z Y, Guo Y H et al. Effect of Ni layer on the microstructure evolution and mechanical property of Cu-based bearing shell with aging treatment[J]. Materials Chemistry and Physics, 217, 527-532(2018).

[3] Xia Q Z, Wang J M, Yao K et al. Interface bonding properties of multi-layered metal composites using material composition method[J]. Tribology International, 131, 251-257(2019).

[4] Hao Y B, Zhao K, Yang P et al. Microstructure and mechanical properties of tin-based Babbitt alloy made by laser cladding deposition[J]. The Chinese Journal of Nonferrous Metals, 28, 2016-2023(2018).

[5] Zhang W. Research on microstructure and hardness of tin-base Babbitt alloy made by laser remelting[J]. Hot Working Technology, 44, 32-34(2015).

[6] Pukasiewicz A G M. Evaluation of microstructure, mechanical and tribological properties of a Babbitt alloy deposited by arc and flame spray processes[J]. Tribology International, 131, 148-157(2019).

[7] Zhang D Y. Ho J K L, Dong G N, et al. Tribological properties of tin-based Babbitt bearing alloy with polyurethane coating under dry and starved lubrication conditions[J]. Tribology International, 90, 22-31(2015).

[8] Zhang D Y, Zhao F F, Li Y et al. Study on tribological properties of multi-layer surface texture on Babbitt alloys surface[J]. Applied Surface Science, 390, 540-549(2016).

[9] Kamal M, El-Bediwi A, Lashin A R et al. Copper effects in mechanical properties of rapidly solidified Sn-Pb-Sb Babbitt bearing alloys[J]. Materials Science and Engineering: A, 530, 327-332(2011).

[10] Dong Q, Yin Z W, Li H L et al. Effects of Ag micro-addition on structure and mechanical properties of Sn-11Sb-6Cu Babbitt[J]. Materials Science and Engineering: A, 722, 225-230(2018).

[11] Wu H R, Bi Q L, Zhu S Y et al. Friction and wear properties of Babbitt alloy 16-16-2 under sea water environment[J]. Tribology International, 44, 1161-1167(2011).

[12] Wu H R, Bi Q L, Yang J et al. Tribological performance of tin-based white metal ZChSnSb 8-8 under simulated sea water environment[J]. Tribology, 31, 271-277(2011).

[13] Chen J F, Li X P, Xue Y P. Friction and wear properties of laser cladding Fe901 alloy coating on 45 steel surface[J]. Chinese Journal of Lasers, 46, 0502001(2019).

[14] Zhao S Z, Jin J B, Xie M et al. Effects of scanning speed on microstructure and wear resistance of Cu80Fe20 immiscible coatings prepared by laser cladding[J]. Chinese Journal of Lasers, 46, 0302005(2019).

[15] Liu Y N, Sun R L, Niu W et al. Microstructure and friction and wear resistance of laser cladding composite coating on Ti811 surface[J]. Chinese Journal of Lasers, 46, 0102010(2019).

[16] Zhuang Q Q, Zhang P L, Li M C et al. Microstructures and wear resistance properties of Ni-Ti-Si coatings on copper alloy surface by laser cladding[J]. Chinese Journal of Lasers, 44, 1102002(2017).

[17] Moazami Goudarzi M. Jenabali Jahromi S A, Nazarboland A. Investigation of characteristics of tin-based white metals as a bearing material[J]. Materials & Design, 30, 2283-2288(2009).