[1] Xu P, Jiang G Y, Hu Y J et al. Influence of keyhole effect on the cross-section geometry of laser cladding layer[J]. Surface Technology, 48, 125-130(2019).
[2] Li P F, Sun W L, Huang Y et al. Research status of multi-track overlapping laser cladding technology[J]. Hot Working Technology, 45, 7-10, 30(2016).
[3] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components —— Process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).
[5] Onwubolu G C, Davim J P, Oliveira C et al. Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search[J]. Optics & Laser Technology, 39, 1130-1134(2007).
[6] Nabhani M, Razavi R S, Barekat M. An empirical-statistical model for laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate[J]. Optics & Laser Technology, 100, 265-271(2018).
[8] Zhang Z D, Zeng Q W, Liu L M et al. Forming regularity of aluminum alloy formed by laser induced MIG arc additive manufacturing[J]. Transactions of the China Welding Institution, 40, 7-12, 161(2019).
[9] Farahmand P, Kovacevic R. An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics & Laser Technology, 63, 154-168(2014).
[10] Nazemi N, Urbanic R J. A numerical investigation for alternative toolpath deposition solutions for surface cladding of stainless steel P420 powder on AISI 1018 steel substrate[J]. The International Journal of Advanced Manufacturing Technology, 96, 4123-4143(2018).
[14] Xie H M. Process study and profile prediction on laser cladding of titanium alloys[D]. Dalian: Dalian University of Technology, 18-20(2014).
[15] Wu Z Z. Research on electron beam welding-brazing of WC-Co cemented carbide and steel[D]. Harbin: Harbin Institute of Technology, 17-18(2013).
[17] Zheng L J, Li Y, He D C et al. Analysis on temperature field of multi-path laser claded and microstructure of coatings layer[J]. Infrared and Laser Engineering, 42, 52-57(2013).
[18] Zhu Z M, Fu P P, Yang Z Y et al. Research and development of a heat-source model in numerical simulations for the arc welding process[J]. Chinese Journal of Engineering, 40, 389-396(2018).
[20] Zhang S Y, Lin X, Chen J et al. Influence of heat treatment on residual stress of Ti-6Al-4V alloy by laser solid forming[J]. Rare Metal Materials and Engineering, 38, 774-778(2009).