Optimizing Key Experimental Parameters for Laser-Induced Breakdown Spectroscopy of Slides

Pengfei Chang; Jingge Wang; Yi Wu; Zhicong Li; Shunli Zhu

doi:10.3788/LOP56.223002

[1] Sun L X, Yu H B, Cong Z B et al. Applications of laser-induced breakdown spectroscopy in the aluminum electrolysis industry[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 142, 29-36(2018). http://www.sciencedirect.com/science/article/pii/S0584854717305256

[2] Zeng Q, Pan C Y, Li C Y et al. Online monitoring of corrosion behavior in molten metal using laser-induced breakdown spectroscopy[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 142, 68-73(2018). http://www.sciencedirect.com/science/article/pii/S0584854717303981

[3] Lednev V N, Sdvizhenskii P A, Grishin M Y et al. Laser-induced breakdown spectroscopy for three-dimensional elemental mapping of composite materials synthesized by additive technologies[J]. Applied Optics, 56, 9698-9705(2017). http://www.ncbi.nlm.nih.gov/pubmed/29240116

[4] Xiu J S, Liu S M, Wang K K et al. Analytical investigation of Cu(In, Ga)Se2thin films using laser induced breakdown spectroscopy technology[J]. Chinese Journal of Lasers, 45, 1211002(2018).

[5] Han D, Joe Y J, Ryu J S et al. Application of laser-induced breakdown spectroscopy to Arctic sediments in the Chukchi Sea[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 146, 84-92(2018). http://www.sciencedirect.com/science/article/pii/S0584854718301678

[6] Elfaham M M, Eldemerdash U. Advanced analyses of solid waste raw materials from cement plant using dual spectroscopy techniques towards co-processing[J]. Optics & Laser Technology, 111, 338-346(2019).

[7] Lee H, Maeng H, Kim K et al. Application of laser-induced breakdown spectroscopy for real-time detection of contamination particles during the manufacturing process[J]. Applied Optics, 57, 3288-3292(2018). http://europepmc.org/abstract/MED/29714318

[8] Yang Y X, Kang J, Wang Y R et al. Super sensitive detection of lead in water by laser-induced breakdown spectroscopy combined with laser-induced fluorescence technique[J]. Acta Optica Sinica, 37, 1130001(2017).

[9] Shen T T, Kong W W, Liu F et al. Rapid determination of cadmium contamination in lettuce using laser-induced breakdown spectroscopy[J]. Molecules, 23, 2930(2018).

[10] Liang D, Du C W, Ma F et al. Degradation of polyacrylate in the outdoor agricultural soil measured by FTIR-PAS and LIBS[J]. Polymers, 10, 1296(2018).

[11] Rao G F, Huang L, Liu M H et al. Origin identification of navel orange based on laser induced breakdown spectroscopy[J]. Laser & Optoelectronics Progress, 55, 093003(2018).

[12] Singh P, Mal E, Khare A et al. A study of archaeological pottery of Northeast India using laser induced breakdown spectroscopy (LIBS)[J]. Journal of Cultural Heritage, 33, 71-82(2018). http://www.sciencedirect.com/science/article/pii/S1296207417304399

[13] Lazic V, Vadrucci M, Fantoni R et al. Applications of laser-induced breakdown spectroscopy for cultural heritage: a comparison with X-ray Fluorescence and Particle Induced X-ray Emission techniques[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 149, 1-14(2018).

[14] Ewusi-Annan E, Surmick D M, Melikechi N et al. Simulated laser-induced breakdown spectra of graphite and synthetic shergottite glass under Martian conditions[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 148, 31-43(2018). http://www.sciencedirect.com/science/article/pii/S0584854717305736

[15] Wang Y, Chen A M, Jiang Y F et al. Temperature effect on femtosecond laser-induced breakdown spectroscopy of glass sample[J]. Physics of Plasmas, 24, 013301(2017). http://adsabs.harvard.edu/abs/2017PhPl...24a3301W

[16] Wang Y, Chen A M, Wang Q Y et al. Influence of distance between focusing lens and target surface on laser-induced Cu plasma temperature[J]. Physics of Plasmas, 25, 033302(2018).

[17] Zehra K, Bashir S, Hassan S A et al. The effect of nature and pressure of ambient environment on laser-induced breakdown spectroscopy and ablation mechanisms of Si[J]. Laser and Particle Beams, 35, 492-504(2017).

[18] Wang J G, Li X L, Wang C et al. Effect of laser wavelength and energy on the detecting of trace elements in steel alloy[J]. Optik, 166, 199-206(2018). http://www.sciencedirect.com/science/article/pii/S0030402618305035

[19] Golik S S, Ilyin A A, Babiy M Y et al. The influence of laser pulse repetition rate on the intensity of spectral lines in femtosecond laser-induced breakdown spectroscopy of a liquid[J]. Technical Physics Letters, 41, 1044-1046(2015). http://link.springer.com/article/10.1134/S1063785015110048

[20] Leme F O, Godoi Q. Kiyataka P H M, et al. Effect of pulse repetition rate and number of pulses in the analysis of polypropylene and high density polyethylene by nanosecond infrared laser induced breakdown spectroscopy[J]. Applied Surface Science, 258, 3598-3603(2012).

[21] Zhao S R, Zhao Z W, Wang H L et al. Effect of laser frequency on the laser-induced plasma characteristics[J]. Metallurgical Analysis, 37, 9-13(2017).

[22] Chen J Z, Bai J N, Song G J et al. Effects of laser shot frequency on plasma radiation characteristics[J]. Spectroscopy and Spectral Analysis, 32, 2916-2919(2012).

[23] Wang Q, Chen X L, Wang J G et al. Research on factors affecting the stability of laser-induced plasmas[J]. Acta Optica Sinica, 34, 0630002(2014).