3D Printed Zirconia Ceramics via Fused Deposit Modeling and Its Mechanical Properties

Li ZHANG; Xianfeng YANG; Xiewen XU; Jinyu GUO; Zhe ZHOU; Peng LIU; Zhipeng XIE

doi:10.15541/jim20200560

[1] W CHEN Z, Y LI Z, J LI J et al. 3D printing of ceramics: a review. Journal of the European Ceramic Society, 39, 661-687(2019).

[2] Y ZHENG, K ZHANG, T LIU T et al. Cracks of alumina ceramics by selective laser melting. Ceramics International, 45, 175-184(2019).

[3] Y NIU F, J WU D, F LU et al. Microstructure and macro properties of Al₂O₃ ceramics prepared by laser engineered net shaping. Ceramics International, 44, 14303-14310(2018).

[4] W HALLORAN J. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization. Annual Review of Materials Research, 46, 19-40(2016).

[5] B LI X, H ZHONG, X ZHANG J et al. Powder characteristics on the rheological performance of resin-based zirconia suspension for stereolithography. Journal of Inorganic Materials, 35, 231-235(2020).

[6] E FEILDEN, E G T BLANCA, F GIULIANI et al. Robocasting of structural ceramic parts with hydrogel inks. Journal of the European Ceramic Society, 36, 2525-2533(2016).

[7] E BENARFA B A, S NETO A, M MIRANDA I et al. Robocasting: prediction of ink printability in solgel bioactive glass. Journal of the American Ceramic Society, 102, 1608-1618(2019).

[8] L HE Q, J JIE, F YANG X et al. Additive manufacturing of dense zirconia ceramics by fused deposition modeling via screw extrusion. Journal of the European Ceramic Society, 41, 1033-1040(2021).

[9] S CANO, J GONZALEZ-GUTIERREZ, J SAPKOTA et al. Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: selection of binder formulation. Additive Manufacturing, 26, 117-128(2019).

[10] L GORJAN, R TONELLO, T SEBASTIAN et al. Fused deposition modeling of mullite structures from a preceramic polymer and gamma-alumina. Journal of the European Ceramic Society, 39, 2463-2471(2019).

[11] A ARNESANO, K PADMANABHAN S, A NOTARANGELO et al. Fused deposition modeling shaping of glass infiltrated alumina for dental restoration. Ceramics International, 46, 2206-2212(2020).

[12] P KIM N, D CHO, M ZIELEWSKI. Optimization of 3D printing parameters of screw type extrusion (STE) for ceramics using the taguchi method. Ceramics International, 45, 2351-2360(2019).

[13] U SCHEITHAUER, E SCHWARZER, J RICHTER H et al. Thermoplastic 3D printing-An additive manufacturing method for producing dense ceramics. International Journal of Applied Ceramic Technology, 12, 26-31(2015).

[14] B LI J, G XIE Z, H ZHANG X et al. Study of metal powder extrusion and accumulating rapid prototyping. Key Engineering Materials, 443, 81-86(2010).

[15] E RYSHKEWITCH. Compression strength of porous sintered alumina and zirconia. Journal of the American Ceramic Society, 36, 65-68(1953).