[1] Zheng M G, Yan J Q, Jun S T, et al. The general design and technology innovations of CAP1400［J］. Engineering, 2016, 2(1): 97-102.
[2] Manikandan M, Arivazhagan N, Rao M N, et al. Improvement of microstructure and mechanical behavior of gas tungsten arc weldments of alloy C-276 by current pulsing［J］. Acta Metallurgica Sinica, 2015, 28(2): 208-215.
[3] Li Xinhe, Yan Yuesheng, Liu Yanping, el al. Study on microstructure and properties of welded joint of extra thin Ni-based alloy plate［J］. Journal of Plasticity Engineering, 2011, 18(6): 91-96.
[4] Ahmad M, Akhter J I, Akhtar M, el al. Microstructure and hardness studies of the electron beam welded zone of Hastelloy C-276［J］. Journal of Alloys and Compounds, 2005, 390(1/2): 88-93.
[5] Ma Guangyi, Wu Dongjiang, Wang Zhanhong. Weld joint forming of thin Hastelloy C-276 sheet of pulsed laser welding［J］. Chinese J Lasers, 2011, 38(6): 0603014.
[6] Ma G Y, Wu D J, Niu F Y, et al. Microstructure evolution and mechanical property of pulsed laser welded Ni-based superalloy［J］. Optics and Lasers in Engineering, 2015, 72: 39-46.
[7] Turichin G A, Tsibulskiy I, Kuznetsov M, et al. Influence of the gap width on the geometry of the welded joint in hybrid laser-arc welding［J］. Physics Procedia, 2015, 78: 14-23.
[9] Qi Xiaoyong, Zhang Wei, Yu Shiwen, et al. Microstructural and mechanical study on laser welding seam of C18000 alloy［J］. Laser & Optoelectronics Progress, 2017, 54(7): 071405.
[10] Chen Genyu, Chen Fei, Zhang Yi, et al. Effect of butt joint gap to high-strength automobile steel of fiber laser welding［J］. Chinese J Lasers, 2011, 38(6): 0603013.
[11] Wang Qiming, Qiao Junnan, Zou Jianglin, et al. Fiber laser-variable polarity TIG hybrid welding of A7N01 aluminum alloy with filler wire［J］. Chinese J Lasers, 2016, 43(6): 0602004.
[12] Zhao Yong, Wang Qingzhao, Huang Jian, et al. Microstructures and properties of ultra-narrow-gap multi-pass welded joint of 50 mm turbine rotor steel by laser welding with filler wire［J］. Chinese J Lasers, 2015, 42(2): 0203007.
