[1] LeyensCPetersMTitanium and Titanium Alloys: Fundamentals and Applications (Wiley-VCH, Weinheim, 2003)Leyens C, Peters M. Titanium and Titanium Alloys: Fundamentals and Applications (Wiley-VCH, Weinheim, 2003).

[2] G Lütjering, J C Williams. Titanium. Engineering Materials and Processes, 2nd ed (Springer-Verlag, Berlin, 2007).

[3] M Yan, M S Dargusch, T Ebel, M Qian. A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility. Acta Mater, 68, 196-206(2014).

[4] B H Lu, H B Lan, H Z Liu. Additive manufacturing frontier: 3D printing electronics. Opto-Electron Adv, 1, 170004(2018).

[5] M Qian, W Xu, M Brandt, H P Tang. Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties. MRS Bull, 41, 775-784(2016).

[6] L Thijs, F Verhaeghe, T Craeghs, J Van Humbeeck, J P Kruth. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V. Acta Mater, 58, 3303-3312(2010).

[7] Y H Zhou, S F Lin, Y H Hou, D W Wang, P Zhou et al. Layered surface structure of gas-atomized high Nb-containing TiAl powder and its impact on laser energy absorption for selective laser melting. Appl Surf Sci, 441, 210-217(2018).

[8] C L Qiu, N J E Adkins, M M Attallah. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V. Mater Sci Eng: A, 578, 230-239(2013).

[9] D Ouyang, N Li, W Xing, J J Zhang, L Liu. 3D printing of crack-free high strength Zr-based bulk metallic glass composite by selective laser melting. Intermetallics, 90, 128-134(2017).

[10] N Li, J J Zhang, W Xing, D Ouyang, L Liu. 3D printing of Fe-based bulk metallic glass composites with combined high strength and fracture toughness. Mater Des, 143, 285-296(2018).

[11] YanMYuPAn Overview of densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V-Comparison among selective laser melting, electron beam melting, laser metal deposition and selective laser sintering, and with conventional powder. In Lakshmanan A, Sintering Techniques of Materials (IntechOpen, London, 2015)Yan M, Yu P. An Overview of densification, microstructure and mechanical property of additively manufactured Ti-6Al-4V-Comparison among selective laser melting, electron beam melting, laser metal deposition and selective laser sintering, and with conventional powder. In Lakshmanan A, Sintering Techniques of Materials (IntechOpen, London, 2015).

[12] UpadhyayaG SPowder Metallurgy Technology (Cambridge International Science Publishing, Cambridge, 1998)Upadhyaya G S. Powder Metallurgy Technology (Cambridge International Science Publishing, Cambridge, 1998).

[13] LuS CPowder Technology Handbook (Chemical Industry Press, Beijing, 2004)Lu S C. Powder Technology Handbook (Chemical Industry Press, Beijing, 2004).

[14] J S Benjamin, T E Volin. The mechanism of mechanical alloying. Metall Trans, 5, 1929-1934(1974).

[15] C Suryanarayana. Mechanical alloying and milling. Prog Mater Sci, 46, 1-184(2001).

[16] P S Gilman, J S Benjamin. Mechanical alloying. Ann Rev Mater Sci, 39, 279-300(1983).

[17] LideD RCRC Handbook of Chemistry and Physics, 2009-2010 90th ed (CRC Press, Boca Raton, 2009)Lide D R. CRC Handbook of Chemistry and Physics, 2009-2010 90th ed (CRC Press, Boca Raton, 2009).

[18] XiS QQuX YZhengX LMaM LLiuX Ket al.Mater Sci Tech5, 45 (1997)Xi S Q, Qu X Y, Zheng X L, Ma M L, Liu X K et al. Mater Sci Tech 5, 45 (1997).

[19] J J Yang, H C Yu, J Yin, M Gao, Z M Wang et al. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting. Mater Des, 108, 308-318(2016).

[20] J L Murray. Fe-Ti (Iron-Titanium). In Okamoto H, Phase Diagrams of Binary Iron Alloys (ASM International, Materials Park, OH, 429-432, 1993) .

[21] M Yan, M Qian, T T Song, M S Dargusch. Significant α-phase growth confinement in Grade 4 titanium and substantial β-phase refinement in Grade 7 titanium. MRS Commun, 4, 183-188(2014).

[22] MurrayJ LASTM B861-10, Standard Specification for Titanium and Titanium Alloy Seamless Pipe, (ASTM International, West Conshohocken, PA, 2010), www.astm.orghttp://www.astm.orgwww.astm.org.

[23] M Yan, W Xu, M S Dargusch, H P Tang, M Brandt et al. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys. Powder Metall, 57, 251-257(2014).

[24] H Conrad. Effect of interstitial solutes on the strength and ductility of titanium. Prog Mater Sci, 26, 123-403(1981).

[25] S D Luo, Q Li, J Tian, C Wang, M Yan et al. Self-assembled, aligned TiC nanoplatelet-reinforced titanium composites with outstanding compressive properties. Scr Mater, 69, 29-32(2013).