• Infrared and Laser Engineering
  • Vol. 54, Issue 3, 20240543 (2025)
Luqi LI1, Ruokun HE2, Yiqiu GU1, Zhuochen MA1,2, and Bing HAN1
Author Affiliations
  • 1Institute of Medical Robotics, School of Biomedical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • 2Department of Automation, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
  • show less
    DOI: 10.3788/IRLA20240543 Cite this Article
    Luqi LI, Ruokun HE, Yiqiu GU, Zhuochen MA, Bing HAN. Two-photon polymerization technology drives the functionalization of the distal end of medical guidewires and catheters (invited)[J]. Infrared and Laser Engineering, 2025, 54(3): 20240543 Copy Citation Text show less
    References

    [1] G Z YANG, J BELLINGHAM, P E DUPONT et al. The grand challenges of science robotics. Science Robotics, 3, eaar7650(2018).

    [2] G Z YANG, J BELLINGHAM, P E DUPONT et al. The grand challenges of science robotics. Advanced Intelligent Systems, 5, 2200416(2023).

    [3] M E M K ABDELAZIZ, J ZHAO, B G ROSA et al. Fiberbots: Robotic fibers for high-precision minimally invasive surgery. Science Advances, 10, eadj1984(2024).

    [4] J HWANG, S JEON, B KIM et al. An electromagnetically controllable microrobotic interventional system for targeted, real‐time cardiovascular intervention. Advanced Healthcare Materials, 11, 2102529(2022).

    [5] N KWAK, D SIEGEL. Imaging and interventional therapy for varicoceles. Current Urology Reports, 15, 399(2014).

    [6] P VAIANO, B CAROTENUTO, M PISCO et al. Lab on fiber technology for biological sensing applications. Laser & Photonics Reviews, 10, 922-961(2016).

    [7] J Y E CHAN, Q RUAN, M JIANG et al. High-resolution light field prints by nanoscale 3D printing. Nature Communications, 12, 3728(2021).

    [8] M A SULTAN, F BALLI, D L LAU et al. Hybrid metasurfaces for simultaneous focusing and filtering. Optics Letters, 46, 214-217(2021).

    [9] D WU, L G NIU, S Z WU et al. Ship-in-a-bottle femtosecond laser integration of optofluidic microlens arrays with center-pass units enabling coupling-free parallel cell counting with a 100% success rate. Lab on a Chip, 15, 1515-1523(2015).

    [10] H GEHRING, M BLAICHER, W HARTMANN et al. Low-loss fiber-to-chip couplers with ultrawide optical bandwidth. APL Photonics, 4, 010801(2019).

    [11] S MARUO, K IKUTA, H KOROGI. Submicron manipulation tools driven by light in a liquid. Applied Physics Letters, 82, 133-135(2003).

    [12] J QIAN, S KOLAGATLA, A PACALOVAS et al. Responsive spiral photonic structures for visible vapor sensing, pattern transformation and encryption. Advanced Functional Materials, 33, 2211735(2023).

    [13] X ZHENG, H LEE, T H WEISGRABER et al. Ultralight, ultrastiff mechanical metamaterials. Science, 344, 1373-1377(2014).

    [14] S KAWATA, H B SUN, T TANAKA et al. Finer features for functional microdevices. Nature, 412, 697-698(2001).

    [15] H WANG, W ZHANG, D LADIKA et al. Two‐photon polymerization lithography for optics and photonics: fundamentals, materials, technologies, and applications. Advanced Functional Materials, 33, 2214211(2023).

    [16] Q JIN, Y YANG, J A JACKSON et al. Untethered single cell grippers for active biopsy. Nano Letters, 20, 5383-5390(2020).

    [17] H ZHOU, S ZHANG, Z LIU et al. Untethered microgrippers for precision medicine. Small, 20, 2305805(2024).

    [18] K KOBAYASHI, C YOON, S H OH et al. Biodegradable thermomagnetically responsive soft untethered grippers. ACS Applied Materials & Interfaces, 11, 151-159(2019).

    [19] J S RANDHAWA, T G LEONG, N BASSIK et al. Pick-and-place using chemically actuated microgrippers. Journal of the American Chemical Society, 130, 17238-17239(2008).

    [20] G T IVÁNYI, B NEMES, I GRÓF et al. Optically actuated soft microrobot family for single‐cell manipulation. Advanced Materials, 36, 2401115(2024).

    [21] A OZCELIK, J RUFO, F GUO et al. Acoustic tweezers for the life sciences. Nature Methods, 15, 1021-1028(2018).

    [22] S E CHUNG, X DONG, M SITTI. Three-dimensional heterogeneous assembly of coded microgels using an untethered mobile microgripper. Lab on a Chip, 15, 1667-1676(2015).

    [23] M POWER, A J THOMPSON, S ANASTASOVA et al. A monolithic force-sensitive 3D microgripper fabricated on the tip of an optical fiber using 2-photon polymerization. Small, 14, 1703964(2018).

    [24] M POWER, A BARBOT, F SEICHEPINE et al. Bistable, pneumatically actuated microgripper fabricated using two‐photon polymerization and oxygen plasma etching. Advanced Intelligent Systems, 5, 2200121(2023).

    [25] A BARBOT, M POWER, F SEICHEPINE et al. Liquid seal for compact micropiston actuation at the capillary tip. Science Advances, 6, eaba5660(2020).

    [26] A ASHKIN. Acceleration and trapping of particles by radiation pressure. Physical Review Letters, 24, 156(1970).

    [27] A ASHKIN, J M DZIEDZIC, J E BJORKHOLM et al. Observation of a single-beam gradient force optical trap for dielectric particles. Optics Letters, 11, 288-290(1986).

    [28] M PLIDSCHUN, H REN, J KIM et al. Ultrahigh numerical aperture meta-fibre for flexible optical trapping. Light: Science & Applications, 10, 57(2021).

    [29] A ASADOLLAHBAIK, S THIELE, K WEBER et al. Highly efficient dual-fiber optical trapping with 3D printed diffractive fresnel lenses. ACS Photonics, 7, 88-97(2020).

    [30] T GISSIBL, S THIELE, A HERKOMMER et al. Two-photon direct laser writing of ultracompact multi-lens objectives. Nature Photonics, 10, 554-560(2016).

    [31] B LI, C LIAO, Z CAI et al. Femtosecond laser 3D printed micro objective lens for ultrathin fiber endoscope. Fundamental Research, 4, 123-130(2022).

    [32] S THIELE, C PRUSS, A M HERKOMMER et al. 3D printed stacked diffractive microlenses. Optics Express, 27, 35621-35630(2019).

    [33] F BALLI, M SULTAN, S K LAMI et al. A hybrid achromatic metalens. Nature Communications, 11, 3892(2020).

    [34] J LI, S THIELE, B C QUIRK et al. Ultrathin monolithic 3D printed optical coherence tomography endoscopy for preclinical and clinical use. Light: Science & Applications, 9, 124(2020).

    [35] M WEBER, J HUISKEN. Light sheet microscopy for real-time developmental biology. Current Opinion in Genetics & Development, 21, 566-572(2011).

    [36] E H STELZER. Light-sheet fluorescence microscopy for quantitative biology. Nature Methods, 12, 23-26(2015).

    [37] R TOMER, M LOVETT-BARRON, I KAUVAR et al. SPED light sheet microscopy: fast mapping of biological system structure and function. Cell, 163, 1796-1806(2015).

    [38] S LI, J JIAO, J BOONRUANGKAN et al. Self-reconstructing Bessel beam created by two-photon-polymerized micro-axicon for light-sheet fluorescence microscopy. Results in Physics, 24, 104111(2021).

    [39] Z XIE, S FENG, P WANG et al. Demonstration of a 3D radar-like SERS sensor micro- and nanofabricated on an optical fiber. Advanced Optical Materials, 3, 1232-1239(2015).

    [40] J A KIM, D J WALES, A J THOMPSON et al. Fiber‐optic SERS probes fabricated using two‐photon polymerization for rapid detection of bacteria. Advanced Optical Materials, 8, 1901934(2020).

    [41] L LONG, Q DENG, R HUANG et al. Plasmonic enhanced fluorescence via 3D printing spiral conical tapered gold tip bound to optical fiber. APL Photonics, 7, 046107(2022).

    [42] S TANG, M ZOU, C ZHAO et al. Fabry-perot interferometer based on a fiber-tip fixed-supported bridge for fast glucose concentration measurement. Biosensors, 12, 391(2022).

    [43] M ZOU, C LIAO, Y CHEN et al. 3D printed fiber-optic nanomechanical bioprobe. International Journal of Extreme Manufacturing, 5, 015005(2023).

    [44] X SHANG, N WANG, S CAO et al. Fiber‐integrated force sensor using 3D printed spring‐composed Fabry‐Perot cavities with a high precision down to tens of piconewton. Advanced Materials, 36, 2305121(2024).

    [45] C XIONG, C WANG, Y QIN et al. 3D-printed ultracompact multicore fiber-tip probes for simultaneous measurement of nanoforce and temperature. ACS Applied Materials & Interfaces, 16, 30443-30452(2024).

    [46] R YIN, Y YANG, L HOU et al. Two-photon 3D printed fiber-optic Fabry–Perot probe for triaxial contact force detection of guidewire tips. Photonics Research, 12, 2474(2024).

    [47] J C WILLIAMS, H CHANDRAHALIM, J S SUELZER et al. Multiphoton nanosculpting of optical resonant and nonresonant microsensors on fiber tips. ACS Applied Materials & Interfaces, 14, 19988-19999(2022).

    [48] A BARBOT, D WALES, E YEATMAN et al. Microfluidics at fiber tip for nanoliter delivery and sampling. Advanced Science, 8, 2004643(2021).

    [49] J FAN, S REN, B HAN et al. Magnetic fiber robots with multiscale functional structures at the distal end. Advanced Functional Materials, 34, 2309424(2024).

    Luqi LI, Ruokun HE, Yiqiu GU, Zhuochen MA, Bing HAN. Two-photon polymerization technology drives the functionalization of the distal end of medical guidewires and catheters (invited)[J]. Infrared and Laser Engineering, 2025, 54(3): 20240543
    Download Citation