[1] Chung K T and Geddam A 2003 A multi-sensor approach to the monitoring of end milling operations J. Mater. Process. Technol. 139 15–20

[2] Abellan-Nebot J V and Subirón F R 2010 A review of machining monitoring systems based on artificial intelligence process models Int. J. Adv. Manuf. Technol. 47 237–57

[3] Liang S Y, Hecker R L and Landers R G 2004 Machining process monitoring and control: the state-of-the-art J. Manuf. Sci. Eng. 126 297–310

[4] Duro J A, Padget J A, Bowen C R, Kim H A and Nassehi A 2016 Multi-sensor data fusion framework for CNC machining monitoring Mech. Syst. Signal Process. 66 505–20

[5] Majumder B D, Roy J K and Padhee S 2019 Recent advances in multifunctional sensingtechnology on a perspective of multi-sensor system: a review IEEE Sens. J. 19 1204–14

[6] Hackett J K and Shah M 1990 Multi-sensor fusion: a perspective Proc. Int. Conf. on Robotics and Automation vol 2, pp 1324–30

[7] Joshi R and Sanderson A C 1999 Multisensor Fusion: A Minimal Representation Framework (Singapore: World Scientific)

[8] Mitchell H B 2007 Multi-Sensor Data Fusion: An Introduction (Berlin: Springer)

[9] Khaleghi B, Khamis A, Karray F O and Razavi S N 2013 Multi-sensor data fusion: a review of the state-of-the-art Inf. Fusion 14 28–44

[10] Luo R C, Chang C C and Lai C C 2011 Multi-sensor fusion and integration: theories, applications, and its perspectives IEEE Sens. J. 11 3122–38

[11] Smith D and Singh S 2006 Approaches to multi-sensor data fusion in target tracking: a survey IEEE Trans. Knowl. Data Eng. 18 1696–710

[12] Lynen S, Achtelik M W, Weiss S, Chli M and Siegwart R 2013 A robust and modular multi-sensor fusion approach applied to mav navigation Int. Conf. on Intelligent Robots and Systems (IROS) pp 3923–9

[13] Abdulhafiz W A and Khamis A 2013 Bayesian approach to multi-sensor data fusion with pre-and post-filtering 10th IEEE Int. Conf. on Networking, Sensing and Control pp 373–8

[14] Luo R C and Chang C C 2012 Multisensor fusion and integration: a review on approaches and its applications in mechatronics IEEE Trans. Ind. Inf. 8 49–60

[15] Elmenreich W 2007 A review on system architectures for sensor fusion applications Proc. Int. Federat. Inf. Process. pp 547–59

[16] Luo R C and Su K L 2008 Multilevel multi sensory-based intelligent recharging system for mobile robot IEEE Trans. Ind. Electron. 55 270–9

[17] Matzka S and Altendorfer R 2008 A comparison of track-totrack fusion algorithms for automotive sensor fusion Proc. IEEE Int. Conf. Multisensor Fusion Integrat. Intell. Syst. vol 35, pp 189–94

[18] Yang Y, Han C, Kang X and Han D 2007 An overview on pixel-level image fusion in remote sensing Proc. IEEE Int. Conf. Autom. Logist. pp 2339–44

[19] Zhang L, Stiens J and Sahli H 2008 Multispectral image fusion for active millimeter wave imaging application Proc. Global Symp. Millimeter Waves pp 131–4

[20] Luo R C and Su K L 1999 A review of high-level multisensor fusion: approaches and applications Proc. IEEE Int. Conf. Multisensor Fusion Integrat. Intell. Syst. pp 25–31

[21] Liggins M, Hall D and Llinas J 2009 Handbook of Multisensor Data Fusion: Theory and Practice 2nd ed. (Boca Raton, FL: CRC Press) pp 32742–3487 [3] B. Khaleghi

[22] Hashmipour H, Roy S and Laub A 1988 Decentralized structures for parallel Kalman Filtering IEEE Trans. Autom. Control 33 88–93

[23] Zhu Y, You Z, Zhao J, Zhang K and Li X 2001 The optimality for the distributed Kalman filtering fusion with feedback Automatica 37 1489–93

[24] Sun S and Deng Z 2004 Multi-sensor optimal information fusion Kalman filter Automatica 40 1017–23

[25] Chang K, Tian Z, Mori S and Chong C 2004 Performance evaluation for MAP state estimate fusion IEEE Trans. Aerosp. Electron. Syst. 40 706–14

[26] Sun S 2004 Multi-sensor information fusion white noise filter weighted by scalars based on Kalman predictor Automatica 40 1447–53

[27] Song E, Zhu Y, Zhou J and You Z 2007 Optimal Kalman filtering fusion with cross-correlated sensor noises Automatica 43 1450–6

[28] Li X, Zhu Y, Wang J and Han C 2003 Optimal linear estimation fusion: I. Unified fusion rules IEEE Trans. Inf. Theory 49 2192–208

[29] Khamis A, Karray F and Razavi S 2013 Multisensor data fusion: a review of the state-of-the-art Inf. Fusion 14 28–44

[30] Sun S 2005 Distributed optimal component fusion weighted by scalars for fixed-lag Kalman smoother Automatica 41 2153–9

[31] Feng J and Zeng M 2012 Optimal distributed Kalman filtering fusion for a linear dynamic system with cross-correlated noises Int. J. Syst. Sci. 43 385–98

[32] Kim K 1994 Development of track to track fusion algorithm Proc. American Control Conf. pp 1037–41

[33] Li X, Zhu Y, Wang J and Han C 2000 Unified optimal linear estimation fusion: I. Unified models and fusion rules Information Fusion Conf. pp 10–7

[34] Sun S 2004 Multi-sensor optimal information fusion Kalman filter with application Aerosp. Sci. Technol. 8 57–62

[35] Moon S K, Tan Y E, Hwang J and Yoon Y J 2014 Application of 3D printing technology for designing lightweight unmanned aerial vehicle wing structures Int. J. Precis. Eng. Manuf.—Green Technol. 1 223–8

[36] Frazier W E 2014 Metal additive manufacturing: a review J. Mater. Eng. Perform. 23 1917–28

[37] Yao X, Moon S K and Bi G 2016 A cost-driven design methodology for additive manufactured variable platforms in product families J. Mech. Des. 138 041701

[38] Peng X, Kong L B, Chen Y, Wang J H and Xu M 2018 A preliminary study of in situ defects measurement for additive manufacturing based on muti-spectrum Proc. SPIE 10842 1084217

[39] Ko H, Moon S K and Hwang J 2015 Design for additive manufacturing in customized products Int. J. Precis. Eng. Manuf. 16 2369–75

[40] Lott P, Schleifenbaum H, Meiners W, Wissenbach K, Hinke C and Bultmann J 2011 Design of an optical system for the in situ process monitoring of selective laser melting Phys. Proc. 12 683–90

[41] Doubenskaia M, Pavlov M, Grigoriev S, Tikhonova E and Smurov I 2012 Comprehensive optical monitoring of selective laser melting J. Laser Micro/Nanoeng. 7 236–43

[42] Schilp J, Seidel C, Krauss H and Weirather J 2014 Investigation on temperature fields during laser beam melting by means of process monitoring and multiscale process modelling Adv. Mech. Eng. 6 217584

[43] Marco G and Bianca M C 2017 Process defects and in situ monitoring methods in metal powder bed fusion: a review Meas. Sci. Technol. 25 044005

[44] Craeghs T, Bechmann F, Berumen S and Kruth J P 2010 Feedback control of Layerwise Laser Melting using optical sensors Phys. Proc. 5 505–14

[45] Mireles J, Ridwan S, Morton P A, Hinojos A and Wicker R B 2015 Analysis and correction of defects within parts fabricated using powder bed fusion technology Surf. Topogr.: Metrol. Prop. 3 034002

[46] Standard A 2012 Standard Terminology for Additive Manufacturing Technologies (West Conshohocken, PA: ASTM International) pp F2792–12a

[47] Kruth J P, Mercelis P, Van J V and Craeghs T 2007 Feedback control of selective laser melting Proc. 3rd Int. Conf. on Advanced Research in Virtual and Rapid Prototyping pp 521–7

[48] Berumen S, Bechmann F, Lindner S, Kruth J P and Craeghs T 2010 Quality control of laser and powder bed-based Additive Manufacturing (AM) technologies Phys. Proc. 5 617–22

[49] Craeghs T, Clijsters S, Kruth J P, Bechmann F and Ebert M C 2012 Detection of process failures in layerwise laser melting with optical process monitoring Phys. Proc. 39 753–9

[50] Clijsters S, Craeghs T, Buls S, Kempen K and Kruth J P 2014 In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system Int. J. Adv. Manuf. Technol. 75 1089–101

[51] Zhang Y C, II H A and Seung K M 2017 Process monitoring and inspection systems in metal additive manufacturing: status and applications Int. J. Precis. Eng. Manuf.—Green Technol. 4 235–45

[52] Petrat T, Graf B, Gumenyuk A and Rethmeier M 2016 Laser metal deposition as repair technology for a gas turbine burner made of Inconel 718 Phys. Proc. 83 761–8

[53] Hu D and Kovacevic R 2003 Sensing, modeling and control for laser-based additive manufacturing Int. J. Mach. Tools Manuf. 43 51–60

[54] Chabot M and Hascoet J Y R 2019 Towards a multi-sensor monitoring methodology for AM metallic processes Weld. Word 63 759–69

[55] Xiong J, Pi Y P and Chen H 2019 Deposition detection and feature point extraction in robolic GTA-based additive manufacturing using passive vision sensing Robot. Comput. Intergrated Manuf. 59 326–34

[56] Xiong J, Liu G C and Pi Y P 2019 Increasing stability in robotic GTA-based additive manufacturing through optical measurement and feedback control Robot. Comput. Intergrated Manuf. 59 385–93

[57] Vandone A, Baraldo S and Valente A 2018 Multisensor data fusion for additive manufacturing process control IEEE Robot. Autom. Lett. 3 3279–84

[58] Hossain M S, Mireles J, Morton P, Lin Y, Terrazas C A and Wicker R B 2018 Part re-registration during process interruption of electron beam melting additive manufacturing Int. J. Adv. Manuf. Technol. 96 337–44

[59] Shao J and Yan Y 2005 Review of techniques for online monitoring and inspection of laser welding J. Phys.: Conf. Ser. 15 101–7

[60] Kawahito Y, Matsumoto N, Mizutani M and Katayama S 2008 Characterisation of plasma induced during high power fibre laser welding of stainless steel Sci. Technol. Weld. Joining 13 744–8

[61] Ostendorf A, Kulik C J, Stallmach M and Zeadan J 2004 Basic investigations for controlling the laser spot-welding process when packaging 3-dimensional molded interconnect devices Proc. SPIE 5339 441–7

[62] Zhang X, Chen W, Ashida E and Matsuda F 2004 Relationship between weld quality and optical emissions in underwater Nd:YAG laser welding Opt. Lasers Eng. 41 717–30

[63] Palanco S, Klassen M, Skupin J, Hansen K, Schubert E, Sepold G and Laserna J J 2001 Spectroscopic diagnostics on CW-laser welding plasmas of aluminum alloys Spectrochim. Acta B 56 651–9

[64] Bono P D, Allen C, Angelo G and Cisi A 2017 Investigation of optical sensor approaches for real-time monitoring during fibre laser welding J. Laser Appl. 29 022417

[65] You D Y, Gao X D and Katayama S 2014 Review of laser welding monitoring Sci. Technol. Weld. Joining 19 181–201

[66] Zhang Y M, Zhang S B and Liu Y C 2001 A plasma cloud charge sensor for pulse keyhole process control Meas. Sci. Technol. 12 1365–70

[67] Li L, Brookfield D J, Williams K, Steen W M and Chen H B 1991 Laser process monitoring with dual wavelength optical sensors Proc. Laser Materials Processing Symp. ICALEO'91 (San Jose, CA) pp 113–22

[68] Miyamoto I, Kamimuki K, Maruo H, Mori K and Sakamoto M 1993 In-process monitoring in laser welding of auto-motive parts Proc. ICALEO'93 pp 413–24

[69] Miyamoto I and Mori K 1995 Development of in-process monitoring system for laser welding Proc. ICALEO'95 pp 759–67

[70] Olsson R, Eriksson I, Powell J, Langtry A V and Kaplan A F H 2011 Challenges to the interpretation of the electro-magnetic feedback from laser welding Opt. Lasers Eng. 49 188–94

[71] Park H and Rhee S 2001 Development of a weld quality monitoring system in CO2 laser welding by using photodiode J. Laser Appl. 13 12–8

[72] Park Y W, Park H, Rhee S and Kang M 2002 Real time estimation of CO2 laser weld quality for automotive industry Opt. Laser Technol. 34 135–42

[73] Sibillano T, Ancona A, Berardi V and Lugara P M 2007 Realtime monitoring of laser welding by correlation analysis: the case of AA5083 Opt. Lasers Eng. 45 1005–9

[74] Palanco S, Klassen M, Skupin J, Hansen K, Schu-bert E, Sepold G and Laserna J J 2001 Spectroscopic diagnostics on CW-laser welding plasmas of aluminum alloys Spectrochim. Acta B 56 641–59

[75] Jauregui J M, Aalderink B J, Aarts R G K M, Olde Benneker J and Meijer J 2008 Design, implementation and testing of a fuzzy control scheme for laser welding J. Laser Appl. 20 146–53

[76] Yu J, Sohn Y, Park Y W and Kwak J S 2016 The development of a quality prediction system for aluminum laser welding to measure plasma intensity using photodiodes J. Mech. Sci. Technol. 30 4697–704

[77] Nagarajan S, Banerjee P and Chen W H 1992 Control of the welding process using infrared sensors IEEE Trans. Robot. Autom. 8 86–93

[78] Carlson N M and Johnson J A 1988 Ultrasonic sensing of weld pool penetration Weld. J. 67 239

[79] Wang X W 2015 Three-dimensional vision applications in GTAW process modeling and control Int. J. Adv. Manuf. Technol. 80 1601–11

[80] Zhang W J et al 2012 Characterization of three dimensional weld pool surface in GTAW Weld. J. 91 195–203

[81] Liang R, Yu R, Luo Y and Zhang Y M 2019 Machine learning of weld joint penetration from weld pool surface usingsupport vector regression J. Phys. J. Manuf. Process. 41 23–8

[82] Wang L, Gao X D and Chen Z Q 2018 Status analysis of keyhole bottom in laser-MAG hybrid welding process Opt. Express 26 347–55

[83] Kawahito Y, Ohnishi T and Katayama S 2009 In-process monitoring and feedback control for stable production of full-penetration weld in continuous wave fiber laser welding J. Phys. D: Appl. Phys. 42 85501–8

[84] Gao X D, You D Y and Katayama S 2015 The high frequency characteristics of laser reflection and visible light during solid state disk laser welding Laser Phys. Lett. 12 076003

[85] Zhang Y, Zhang C, Tan L and Li S 2013 Coaxial monitoring of the fibre laser lap welding of Zn-coated steel sheets using an auxiliary illuminant Opt. Laser Technol. 50 167–75

[86] You D Y, Gao X D and Katayama S 2015 Detection of imperfection formation in disk laser welding using multiple on-line measurements J. Mater. Process. Technol. 219 209–20

[87] Gao X D, Lia Z M, Lin W, Zhou X H, Youa D Y and Gao P P 2019 Detection of weld imperfection in high-power disk laser welding based on association analysis of multi-sensing features Opt. Laser Technol. 115 306–15

[88] Javed K, Gouriveau R, Li X and Zerhouni N 2018 Tool wear monitoring and prognostics challenges: a comparison of connectionist methods toward an adaptive ensemble model J. Intell. Manuf. 29 1873–90

[89] Vetrichelvan G, Sundaram S, Kumaran S S and Velmurugan P 2014 An investigation of tool wear using a coustic emission and genetic algorithm J. Vib. Control 21 3061–6

[90] Bhattacharyya P, Sengupta D and Mukhopadhyay S 2007 Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques Mech. Syst. Signal Process. 21 2665–83

[91] Liu C, Wang G F and Li Z M 2015 Incremental learning for online tool condition monitoring using ellipsoid artmap network model Appl. Soft Comput. 35 186–98

[92] Zhou Y Q and Xue W 2018 Review of tool condition monitoring methods in milling processes Int. J. Adv. Manuf. Technol. 96 2509–23

[93] Zhang C, Yao X, Zhang J and Jin H 2016 Tool condition monitoring and remaining useful life prognostic based on a wireless sensor in dry milling operations Sensors 16 795

[94] Grasso M, Albertelli P and Colosimo B M 2013 An adaptive SPC approach for multi-sensor fusion and monitoring of time-varying processes Procedia CIRP 12 61–6

[95] Wang G, Zhang Y, Liu C, Xie Q and Xu Y 2016 A new tool wear monitoring method based on multi-scale pca J. Intell. Manuf. 7 1–10

[96] Wang G F, Yang Y W, Zhang Y C and Xie Q L 2014 Vibration sensor based tool condition monitoring using ν, support vector machine and locality preserving projection Sensors Actuators A 209 24–32

[97] Wang J, Xie J, Zhao R, Zhang L and Duan L 2017 Multi sensory fusion based virtual tool wear sensing for ubiquitous manufacturing Robot. Comput. Integr. Manuf. 45 47–58

[98] Zhou Y Q, Xue. W and Multisensor Fusion A 2018 Method for tool condition monitoring in milling Sensors 18 3866

[99] Muhammad R, Jaharah A G, Mohd Z N and Che H C H 2018 An embedded multi-sensor system on the rotating dynamometerfor real-time condition monitoring in milling Int. J. Adv. Manuf. Technol. 95 811–23

[100] Touret T, Changenet C, Ville F, Lalmi M and Becquerelle S 2018 On the use of temperature for online condition monitoring of geared systems—a review Mech. Syst. Signal Process. 101 197–210

[101] Widodo A, Satrijo D, Prahasto T, Lim G M and Choi B K 2012 Confirmation of thermal images and vibration signals for intelligent machine fault diagnostics Int. J. Rotating Mach. 2012 1–10

[102] Tran V T, Yang B S, Gu F and Ball A 2013 Thermal image enhancement using bi-dimensional empirical mode decomposition in combination with relevance vector machine for rotating machinery fault diagnosis Mech. Syst. Signal Process. 38 601–14

[103] Younus A and Yang B 2009 Wavelet coefficient of thermal image analysis for machine fault diagnosis Proc. Int. Conf. Mech. Eng. 39 1–7

[104] Janssens O 2016 Convolutional neural network based fault detection for rotating machinery J. Sound Vib. 377 331–45

[105] Bai T, Zhang L, Duan L and Wang J 2016 NSCT-based infrared image enhancement method for rotating machinery fault diagnosis IEEE Trans. Instrum. Meas. 65 2293–301

[106] Janssens O, de Walle R V, Loccufier M and Hoecke S V 2018 Deep learning for infrared thermal image based machine health monitoring IEEE/ASME Trans. Mechatronics 23 151–9

[107] Lopez-Perez D and Antonino-Daviu J 2017 Application of infrared thermography to failure detection in industrial induction motors: case stories IEEE Trans. Ind. Appl. 53 1901–8

[108] Janssens O, Loccufier M and Hoecke S V 2019 Thermal imaging and vibration-based multisensor fault detection for rotating machinery IEEE Trans. Ind. Inf. 15 434–44

[109] Jin L R 2006 Study on synthetic diagnosis method of transformer fault using multi-neural network and evidence theory Proc. CSEE 26 119–24

[110] Zhang X W and Li H S 2019 Research on transformer fault diagnosis method and calculation model by using fuzzy data fusion in multi-sensor detection system Int. J. Light Electron Opt. 176 716–23

[111] Zhang G M 2009 Analysis of detection performance of infrared image sequence based ONMULTI-SENSOR data fusion algorithm J. Infrared Millim. Waves 27 16–9

[112] Xie L J 2015 A fault diagnosis method of power transformers by integrated set pair analysis and association rules Proc. CSEE 35 277–85

[113] Zhang H, Zhao B J and Tang L B 2010 Infrared object tracking based on adaptive multi-features integration Acta Opt. Sin. 30 1291–6

[114] Zhou Y, Chang L L and Qian B 2019 A belief-rule-based model for information fusion with insufficient multi-sensor data and domain knowledge using evolutionary algorithms with operator recommendations Soft Comput. 23 5129–42

[115] Li L Q, Xie S M and Ning J M 2019 Evaluating green tea quality based on multi-sensor data fusion combining hyperspectral imaging and olfactory visualization systems J. Sci. Food Agric. 99 1787–94

[116] Kong F Y, Zhou Y F and Chen G 2019 Multimedia data fusion method based on wireless sensor network in intelligent transportation system Multimedia Tools Appl. 4 1–13

[117] Ambra R, Di. R, Francesco L and Carmelo S 2018 Botanical origin identification of Sicilian honeys based on artificial senses and multi-sensor data fusion Eur. Food Res. Technol. 244 1–9

[118] Yong W L 2018 Identification algorithm of longitudinal road slope based on multi-sensor data fusion filtering J. Mech. Eng. 54 116

[119] Xu Y H, Du B and Zhang L P 2019 Advanced multi-sensor optical remote sensing for urban land use and land cover classification: outcome of the 2018 IEEE GRSS data fusion contest IEEE J. Sel. Top. Appl. Earth Obs. Remote Sens. 99 1–16

[120] Santos F, Meneses P and Hostert P 2018 Monitoring longterm forest dynamics with scarce data: a multi-date classification implementation in the Ecuadorian Amazon Eur. J. Remote Sens. 52 62–78

[121] Gong S L 2018 Design of data fusion algorithm in electrochemical gas sensor J. Nanoelectron. Optoelectron. 13 610–6

[122] Zhu Y X, Bo Y C and Zhang J Z 2018 Fusion of multi-sensor SSTs based on the spatiotemporal hierarchical bayesian model J. Atmos. Ocean. Technol. 35 91–109

[123] Zhang X Y, Huang J L and Wang G H 2018 Multi-radar data association of hypersonic target by LFM radar Acta Electron. Sin. 46 210–7

[124] Jain A and Kanhangad V 2018 Human activity classification in smartphones using accelerometer and gyroscope sensors IEEE Sens. J. 18 1169–77

[125] Yan L F, Minshan C and Saurabh P 2018 Joint euclidean and angular distance-based embeddings for multisource image analysis IEEE Geosci. Remote Sens. Lett. 15 1110–4

[126] Xing Z et al 2018 Multisensor distributed weighted Kalman filter fusion with network delays, stochastic uncertainties, autocorrelated, and cross-correlated noises IEEE Trans. Syst. Man Cybernetics: Syst. 48 716–26

[127] Kushwah A, Kumar S and Hegde R M 2015 Multi-sensor data fusion methods for indoor activity recognition using temporal evidence theory Pervasive Mobile Comput. 21 19–29

[128] Luo R C, Chang C C and Lai C C 2011 Multisensor fusion and integration: theories, applications, and its perspectives IEEE Sens. J. 11 3122–38

[129] Wang M S, Perera C and Jayaraman P P 2015 City data fusion: sensor data fusion in the internet of things Int. J. Distrib. Syst. Technol. 7 15–36

[130] Zhu P X 2013 Application in data fusion of internet of things based on the KL distance of reputation model Adv. Mater. Res. 760–2 587–91

[131] Khaleghi B, Khamis A and Karray F O 2013 Multisensor data fusion: a review of the state-of-the-art Inf. Fusion 14 28–44

[132] Rizvi S A and Nasrabadi N M 2003 Fusion techniques for automatic target recognition Applied Imagery Pattern Recognition Workshop p 10

[133] Chen H Y, Yang J B and Chen P 2020 Saliency fusion of multispectral images with non-uniform texture and complex surface defects J. Beijing Univ. Technol. 1 49–55

[134] Ning Z, Li F and Sheng W 2011 Pyroelectric infrared sensors for human identification using non-negative matrix factorization and BP neural network Adv. Intell. Soft Comput. 122 685–90

[135] Wang C and Qin S 2015 Adaptive detection method of infrared small target based on target-background separation via robust principal component analysis Infrared Phys. Technol. 69 123–35

[136] Ting Y Y and Wang H S 2013 Develop a multi-detection security system using multi-sensor fusion algorithms Artif. Life Robot. 18 83–8

[137] Dai Y and Reweighted Y W 2017 infrared patch-tensor model with both non-local and local priors for single-frame small target detection IEEE J. Sel. Top. Appl. Earth Obs. Remote Sens. 10 3752–67

[138] Liang Z C 2018 Surface Defect Detection System Based on Convolution Neural Network (Hangzhou: Zhejiang University)

[139] Andre F and Vaillon R 2012 Generalization of the k-moment method using the maximum entropy principle. Application to the NBKM and full spectrum SLMB gas radiation models J. Quant. Spectrosc. Radiat. Transfer 113 1508–20

[140] Zhang Y and Zhu Y P 2005 Application and improvement of decision template method in target recognition of decision layer fusion Electrooptic Control 12 16–9

[141] Zhang Y, Zhu Y P and Fu Y W 2005 Modification and application of decision template method in decision-level fusion for target recognition Electron. Opt. Control 12 16–9

[142] Hu L 2015 Study of Image Fusion Algorithm to Edge Erosion of Titanium Alloy With DR Detection (Nachang: Nanchang Hangkong University)

[143] Kemley D J 1992 Notes On the Use of D-S and Fuzzy Reasoning to Fuse Identity Attribute Data (Canberra: AGPS Press) pp 267–426

[144] Roux L and Desachy J 1995 Information fusion for supervised classification in a satellite image Int. Joint Conf. 4th IEEE Int. Conf. on Fuzzy Systems and 2nd Int. Fuzzy Engineering Symp. pp 1119–25

[145] Yang J X and Shi Z H 2004 Objective recognition fusion algorithm based on fuzzy synthesis function method study Radar Technol. 33 11–3

[146] Liu Y X, Li X and Zhuang. Z W 2003 Decision level based on Choquet fuzzy integral information fusion target identification Electron. Inf. Technol. 25 695–9

[147] Wu X L 2017 Micro Quality Inspection Technology of Stone Surface (Shenyang: Shenyang University of Technology)

[148] Ashtiyani M, Navaei L S, Asgharzadeh A and Deevband M R 2018 Heart rate variability classification using support vector machine and genetic algorithm J. Biomed. Phys. Eng. 8 423–34

[149] Zhu L H and Ni G Q 2005 Feature optimization for multisensor target recognition system Opt. Tech. 31 420–6

[150] Liu H 2012 Three-Dimensional Reconstruction of Surface Crack Based on Digital Image Processing (Changchun: Changchun University of Science and Technology)

[151] Zhu H, Wang W and Wang C 2016 Robust track-to-track association in the presence of sensor biases and missed detections Inf. Fusion 27 33–40

[152] Fisch D, Kalkowski E and Sick B 2014 Knowledge fusion for probabilistic generative classifiers with data mining applications IEEE Trans. Knowl. Data Eng. 26 652–66

[153] Dong X, Gabrilovich E and Heitz G 2014 Knowledge vault: a web-scale approach to probabilistic knowledge fusion Proc. 20th ACM SIGKDD Int. Conf. on Knowledge Discovery and Data Mining pp 601–10