[1] L. M. Robert, S. R. Michael, P. J. Thomas. Advances in planar Doppler velocimetry for large-scale wind tunnels[C]. AIAA-2004-2474, 24th Aerodynamic Measurement Technology and Ground Testing Conference, 2004
[2] F. Scarano, B. W. van Oudheusden. Planar velocity measurements of a two-dimensional compressible wake[J]. Exp. Fluids, 2003, 34(3): 430~441
[3] C. T. Smith, C. P. Goyne, R. H. Krauss et al.. Development of a three-component particle image velocimetry technique for a scramjet combustor[C]. AIAA-2005-4104, 41th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exihibit, 2005
[4] D. G. Bohl, M. M. Koochesfahani. Molecular tagging velocimetry measurements of axial flow in a concentrated vortex core[J]. Phys. Fluids, 2004, 16(11): 4185~4191
[5] R. B. Miles, J. Grinstead, R. H. Kohl et al.. The RELIEF flow tagging technique and its application in engine testing facilities and for helium-air mixing studies[J]. Meas. Sci. Technol., 2000, 11(9): 1272~1281
[7] Zhou Jianguang, Zang Shusheng, Weng Shilie et al.. PIV application in the measurement of diffusion combustion flow field[J]. J. Combust. Sci. Technol., 2005, 11(1): 92~95
[11] J. A. Shirley, L. R. Boedeker. Non-intrusive space shuttle main engine nozzle exit diagnostics[C]. AIAA-1988-3038, 24th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exihibit, 1988
[12] L. A. Ribarov, J. A.Wehrmeyer1, R. W. Pitz1 et al.. Hydroxyl tagging velocimetry (HTV) in experimental air flows[J]. Appl. Phys. B, 2002, 74: 175~183
[13] J. A. Wehrmeyer, L. A. Ribarov, D. A. Oguss. Flame flow tagging velocimetry with 193-nm H2O photodissociation[J]. Appl. Opt., 1999, 38(22): 6912~6917
[14] R. W. Pitz, M. D. Lahr, Z. W. Douglas et al.. Hydroxyl tagging velocimetry in a supersonic flow over a cavity[J]. Appl. Opt., 2005, 44(31): 6692~6700
[15] L. A. Ribarov, Hu Shengteng, J. A. Wehrmeyer et al.. Hydroxyl tagging velocimetry method optimization: signal intensity and spectroscopy[J]. Appl. Opt., 2005, 44(31): 6616~6626
[16] Wang Xinyue. Gas Dynamics Basic[M]. Xi’an: Northwest Polytechnical University Press, 2006:143~144