• Laser & Optoelectronics Progress
  • Vol. 56, Issue 8, 082301 (2019)
Xuyan Lan, Xin Yang, Shichen Su, and Yong Zhang*
Author Affiliations
  • Institute of Optoelectronic Materials and Technology, South China Normal University, Guangzhou, Guangdong 510631, China
  • show less
    DOI: 10.3788/LOP56.082301 Cite this Article Set citation alerts
    Xuyan Lan, Xin Yang, Shichen Su, Yong Zhang. Effects of Current and Temperature Stress on Reliability of LED Bulbs[J]. Laser & Optoelectronics Progress, 2019, 56(8): 082301 Copy Citation Text show less
    References

    [1] Yazdan Mehr M, van Driel W D, Koh S et al. . Reliability and optical properties of LED lens plates under high temperature stress[J]. Microelectronics Reliability, 54, 2440-2447(2014). http://www.sciencedirect.com/science/article/pii/S002627141400167X

    [2] Li X P, Chen L, Chen M. An approach of LED lamp system lifetime prediction. [C]∥2011 IEEE International Conference on Quality and Reliability, September 14-17, 2011, Bangkok, Thailand. New York: IEEE, 110-114(2011).

    [3] Trevisanello L, Meneghini M, Mura G et al. Accelerated life test of high brightness light emitting diodes[J]. IEEE Transactions on Device and Materials Reliability, 8, 304-311(2008). http://ieeexplore.ieee.org/document/4472171/

    [4] Zou S P, Wu B X, Wan Z P et al. Effect of current-temperature stress on the reliability of GaN LED[J]. Chinese Journal of Luminescence, 37, 124-129(2016).

    [5] Wang J, Huang X, Liu L et al. Effect of temperature and current on LED luminous efficiency[J]. Chinese Journal of Luminescence, 29, 358-362(2008).

    [6] Xiao C D, Liu C J, Liu W D et al. Reliability assessment of LED lamp based on acceleration degradation test[J]. Chinese Journal of Luminescence, 35, 1143-1153(2014).

    [7] Wagner M, Herzog A, Ganev H et al. LED aging acceleration: An analysis from measuring and aging data of 14000 hours LED degradation. [C]∥2015 12th China International Forum on Solid State Lighting (SSLCHINA), November 2-4, 2015, Shenzhen, China. New York: IEEE, 75-78(2015).

    [8] Wu Y Y, Feng S W, Qiao Y B et al. Study of current crowding effect and reliability of LED devices[J]. Chinese Journal of Luminescence, 34, 1051-1056(2013).

    [9] Meneghesso G, Levada S, Pierobon R et al. Degradation mechanisms of GaN-based LEDs after accelerated DC current aging. [C]∥Digest. International Electron Devices Meeting, December 8-11, 2002, San Francisco, CA, USA. New York: IEEE, 103-106(2002).

    [10] Qian M H, Lin Y D, Sun Y J. Lifeprediction model for LEDs based on the photo-electro-thermal-life theory[J]. Acta Optica Sinica, 32, 0823001(2012).

    [11] Yang S H, Wu F G, Zhang C H. Analysis offailure mechanisms of white LEDs[J]. Semiconductor Optoelectronics, 30, 857-859, 882(2009).

    [12] Chan C J, Hsu F M, Su Y F et al. Study on current and junction temperature stress aging effect for accelerated aging test of Light emitting diodes. [C]∥2016 International Conference on Electronics Packaging (ICEP), April 20-22, 2016, Sapporo, Japan. New York: IEEE, 62-65(2016).

    [13] Narendran N, Bullough J D, Maliyagoda N et al. What is useful life for white light LEDs?[J]. Journal of the Illuminating Engineering Society, 30, 57-67(2001). http://www.tandfonline.com/doi/abs/10.1080/00994480.2001.10748334

    [14] Wang Y. The Research of LED Lamp Lifetime Prediction Methodology[D]. Shanghai: Fudan University(2011).

    [15] Cai M, Yang D G, Koh S, Multi-Physics Simulation, Experiments in Microelectronics et al. Cascais, Portugal. New York: IEEE, 2012: 1/6-6/6.(2012).

    [16] Yuan F. The study on LED reliability under the condition of current-temperature double accelerated stress[D]. Guilin: Guilin University of Electronic Technology(2014).

    [17] Meneghesso G, Levada S, Zanoni E et al. Failure mechanisms of GaN-based LEDs related with instabilities in doping profile and deep levels. [C]∥2004 IEEE International Reliability Physics Symposium. Proceedings, April 25-29, 2004, Phoenix, AZ, USA. New York: IEEE, 474-478(2004).

    [18] Wu F G, Zhao W, Yang S H et al. Beijing, China. New York: IEEE, 2009: 4-978-4-981.(2009).

    [19] Chang M H, Das D, Varde P V et al. Light emitting diodes reliability review[J]. Microelectronics Reliability, 52, 762-782(2012). http://www.sciencedirect.com/science/article/pii/S0026271411003283

    [20] Jung E, Kim H. Rapidoptical degradation of GaN-based light-emitting diodes by a current-crowding-induced self-accelerating thermal process[J]. IEEE Transactions on Electron Devices, 61, 825-830(2014). http://ieeexplore.ieee.org/document/6717180/

    [21] Jung E, Kim S, Kim H. Effects oftemperature on current crowding of GaN-based light-emitting diodes[J]. IEEE Electron Device Letters, 34, 277-279(2013). http://ieeexplore.ieee.org/document/6403502/

    [22] Jeong S, Kim M S, Lee S N et al. Forward and reverse current aging of GaN-based light-emitting diodes fabricated with Ag-based reflective electrodes[J]. Materials Science in Semiconductor Processing, 90, 72-77(2019). http://www.onacademic.com/detail/journal_1000040891977710_12e9.html

    [23] Chan C J, Hsu F M, Su Y F et al. Study on current and junction temperature stress aging effect for accelerated aging test of light emitting diodes. [C]∥2016 International Conference on Electronics Packaging (ICEP), April 20-22, 2016, Sapporo, Japan. New York: IEEE, 62-65(2016).

    [24] He K. Techniques of predicting life of LED[D]. Hangzhou: Hangzhou Dianzi University(2011).

    Xuyan Lan, Xin Yang, Shichen Su, Yong Zhang. Effects of Current and Temperature Stress on Reliability of LED Bulbs[J]. Laser & Optoelectronics Progress, 2019, 56(8): 082301
    Download Citation