• Acta Optica Sinica
  • Vol. 26, Issue 7, 1119 (2006)
[in Chinese]1、*, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]2, [in Chinese]2, [in Chinese]1, and [in Chinese]1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: Cite this Article Set citation alerts
    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. A Continuous-Wave 714 W Fiber Laser With China-Made Large-Mode-Area Double-Clad Fiber[J]. Acta Optica Sinica, 2006, 26(7): 1119 Copy Citation Text show less

    Abstract

    A continuous-wave (CW) fiber laser with 714 Watts output power has been obtained from 21 meters Chia-made Ytterbium-doped large-mode-area double-clad fiber. Two high-power collimated beam laser diodes (wavelenth 976 nm) with spatial filter and aspheric lens are used for pumping from the two ends of the fiber. A CW output power of 501 W is obtained under pump power of 760 W with backward pumping scheme. And the maximum output power of 714.5 W is realised under total pump power of 1137 W with double-sided end-pumping scheme, the optical-to-optial efficiency and the slope efficiency whicd respect to the launched pump power are 62.8% and 67%, respectively.
    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. A Continuous-Wave 714 W Fiber Laser With China-Made Large-Mode-Area Double-Clad Fiber[J]. Acta Optica Sinica, 2006, 26(7): 1119
    Download Citation