• Opto-Electronic Engineering
  • Vol. 44, Issue 12, 1244 (2017)
Xin Zhang, Yang Li, Xia Wang, Yang Li, Gangli Yue, Zhiwei Wang, Jianlai Xie, Jiabin Zhang, and Yongqin Hao
Author Affiliations
  • National Key Lab of High-Power Semiconductor Lasers, Changchun University of Science and Technology, Changchun 130022, China
  • show less
    DOI: Cite this Article
    Xin Zhang, Yang Li, Xia Wang, Yang Li, Gangli Yue, Zhiwei Wang, Jianlai Xie, Jiabin Zhang, Yongqin Hao. Study on etch process of GaSb-based VCSEL[J]. Opto-Electronic Engineering, 2017, 44(12): 1244 Copy Citation Text show less

    Abstract

    2 μm~5 μm mid-infrared vertical cavity surface emitting laser (VCSEL), featured with advantages of low power con-sumption, small divergence angle, no astigmatism circular spot, high modulation bandwidth, wavelength stability, low production cost, and high density ultra-small dimensional packaging, is an ideal light source for the molecular spectrum measurement, biochemical testing, laser radar, thermal imaging and medical diagnosis. For example, in the TDLAS (tunable laser diode absorption spectroscopy test) system for monitoring polluting gases CO, CH4, NH3and HF, the use of VCSEL as a light source will greatly reduce the complexity and the cost for no beam shaping and easily coupled packaging, and shrink the size of the system. Furthermore, its modulation rate can reach several tens of Gbit/s, so it is considered to be the best alternative device of distributed feedback (DFB) laser in the future. As the GaSb material can cover the entire mid-infrared band, it is the best material system for the development of 2 μm~5 μm mid-infrared VCSEL.
    Xin Zhang, Yang Li, Xia Wang, Yang Li, Gangli Yue, Zhiwei Wang, Jianlai Xie, Jiabin Zhang, Yongqin Hao. Study on etch process of GaSb-based VCSEL[J]. Opto-Electronic Engineering, 2017, 44(12): 1244
    Download Citation