Researching | Effect of Boron Carbide Particle Size Distribution on the Microstructure and Properties of Reaction Bonded Boron Carbide Ceramic Composites by Silicon Infiltration

Journals >Journal of Inorganic Materials >Volume 37 >Issue 6 >Page 636 > Article

Journal of Inorganic Materials
Vol. 37, Issue 6, 636 (2022)

Effect of Boron Carbide Particle Size Distribution on the Microstructure and Properties of Reaction Bonded Boron Carbide Ceramic Composites by Silicon Infiltration

Qian XIA, Shihao SUN, Yiliang ZHAO, Cuiping ZHANG^*, Hongqiang RU^*, Wei WANG, and Xinyan YUE

Author Affiliations

Key Laboratory for Anisotropy and Texture of Materials of Ministry of Education, School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China

show less

DOI: 10.15541/jim20210452 Cite this Article

Qian XIA, Shihao SUN, Yiliang ZHAO, Cuiping ZHANG, Hongqiang RU, Wei WANG, Xinyan YUE. Effect of Boron Carbide Particle Size Distribution on the Microstructure and Properties of Reaction Bonded Boron Carbide Ceramic Composites by Silicon Infiltration[J]. Journal of Inorganic Materials, 2022, 37(6): 636 Copy Citation Text

show less

References

[1] Q SONG, Z H ZHANG, Z Y HU et al. Microstructure and mechanical properties of super-hard B₄C ceramic fabricated by spark plasma sintering with (Ti₃SiC₂+Si) as sintering aid. Ceramics International, 8790-8797(2019).

[2] M MASHHADI, N E TAHERI, V M SGLAVO. Pressureless sintering of boron carbide. Ceramics International, 151-159(2010).

[3] X ZHANG, Z ZHANG, S YANG et al. Preparation, microstructure and toughening mechanism of superhard ultrafine grained boron carbide ceramics with outstanding fracture toughness. Journal of Alloys and Compounds, 125-132(2018).

[4] M CHEN, Z YIN, J YUAN et al. Microstructure and properties of a graphene platelets toughened boron carbide composite ceramic by spark plasma sintering. Ceramics International, 15370-15377(2018).

[5] H LEE, R F SPEYER. Pressureless sintering of boron carbide. Journal of the American Ceramic Society, 1468-1473(2003).

[6] V DOMNICH, S REYNAUD, R A HABER et al. Boron carbide: structure, properties, and stability under stress. Journal of the American Ceramic Society, 3605-3628(2011).

[7] S N PEREVISLOV, P V SHCHERBAK, M V TOMKOVICH. High density boron carbide ceramics. Refractories and Industrial Ceramics, 32-36(2018).

[8] B M MOSHTAGHIOUM, F L CUMBRERA-HERNANDEZ, D GÓMEZ-GARCÍA et al. Effect of spark plasma sintering parameters on microstructure and room-temperature hardness and toughness of fine-grained boron carbide (B₄C). Journal of the European Ceramic Society, 361-369(2013).

[9] S HAYUN, V PARIS, M P DARIEL et al. Static and dynamic mechanical properties of boron carbide processed by spark plasma sintering. Journal of the European Ceramic Society, 3395-3400(2009).

[10] L N MA, K Y XIE, M F TOKSOY et al. The effect of Si on the microstructure and mechanical properties of spark plasma sintered boron carbide. Materials Characterization, 274-278(2017).

[11] J WU, N BO, Z FAN et al. Effect of titanium diboride on the homogeneity of boron carbide ceramic by flash spark plasma sintering. Ceramics International, 15323-15330(2018).

[12] M ZHANG, R LI, T YUAN et al. Effect of low-melting-point sintering aid on densification mechanisms of boron carbide during spark plasma sintering. Scripta Materialia, 34-39(2019).

[13] Z T LIU, X G DENG, J M LI et al. Effects of B₄C particle size on the microstructures and mechanical properties of hot-pressed B₄C- TiB₂composites. Ceramics International, 21415-21420(2018).

[14] J J SWAB, J J PITTARI, W R GAMBLE. Uniaxial tensile strength and fracture analysis of a hot-pressed boron carbide. Journal of the European Ceramic Society, 1965-1973(2019).

[15] M ZHANG, R LI, T YUAN et al. Densification and properties of B₄C-based ceramics with CrMnFeCoNi high entropy alloy as a sintering aid by spark plasma sintering. Powder Technology, 58-67(2019).

[17] M Y SUN, Y H BAI, M X LI et al. In situ toughened two-phase B₁₂(C,Si,B)₃-SiC ceramics fabricated via liquid silicon infiltration. Journal of the American Ceramic Society, 2094-2103(2019).

[18] S HAYUN, N FRAGE, M P DARIEL. The morphology of ceramic phases in B_xC-SiC-Si infiltrated composites. Journal of Solid State Chemistry, 2875-2879(2006).

[19] T WANG, C NI, P KARANDIKAR. Microstructure characteristics of reaction-bonded B₄C/SiC composite. Characterization of Minerals Metals & Materials, 279-286(2016).

[20] M WILHELM, S WERDENICH, W WRUSS. Influence of resin content and compaction pressure on the mechanical properties of SiC-Si composites with sub-micron SiC microstructures. Journal of the European Ceramic Society, 981-990(2001).

[21] P BARICK, D C JANA, N THIYAGARAJAN. Effect of particle size on the mechanical properties of reaction bonded boron carbide ceramics. Ceramics International, 763-770(2013).

[22] S HAYUN, A WEIZMANN, M P DARIEL et al. The effect of particle size distribution on the microstructure and the mechanical properties of boron carbide-based reaction-bonded composites. International Journal of Applied Ceramic Technology, 492-500(2009).

[23] M W BARSOUM. Fundamentals of ceramics, 1st edition. New York:Mc. Grow-Hill Book Inc, 326(1997).

[24] O P CHAKRABARTI, S GHOSH, J MUKHERJEE. Influence of grain size, free silicon content and temperature on the strength and toughness of reaction-bonded silicon carbide. Ceramics International, 283-286(1994).

Get PDF(in Chinese)

Figures&Tables (11)

References (23)

Copy Citation Text

Qian XIA, Shihao SUN, Yiliang ZHAO, Cuiping ZHANG, Hongqiang RU, Wei WANG, Xinyan YUE. Effect of Boron Carbide Particle Size Distribution on the Microstructure and Properties of Reaction Bonded Boron Carbide Ceramic Composites by Silicon Infiltration[J]. Journal of Inorganic Materials, 2022, 37(6): 636

Download Citation

Save the article for my favorites

Paper Information

Recommended Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology

Set citation alerts for the article

Please enter your email address