Effects of induction preheating on microstructure and residual stress of laser deposition repair TA15 titanium alloy

Bian Hongyou; Lei Yang; Li Ying; Yang Guang; Qin Lanyun; Wang Wei; Han Shuanglong

doi:10.3788/irla201645.0705003

[1] Wang Huaming, Zhang Shuquan, Wang Xiangming. Progress and challenges of laser direct manufacturing of large titanium structural components(invited paper)[J]. Chinese Journal of Lasers, 2009, 36(12): 3204-3209. (in Chinese)

[2] Huang Weidong, Lin Xin. Research progress in laser solid forming of high performance metallic component[J]. Materials China, 2010, 29(6): 12-27. (in Chinese)

[3] Su Ronghua, Long Risheng, Liu Weijun, et al. Effects of substrate preheating temperature on microstructures of parts formed by laser metal deposition shaping[J]. Journal of Engineering Design, 2009, 16(3): 210-216. (in Chinese)

[4] Long Risheng, Liu Weijun, Xing Fei, et al. Effects of substrate preheating on thermal stress during laser metal deposition shaping[J]. Journal of Mechanical Engineering, 2009, 45(10): 241-247. (in Chinese)

[5] Lin Tao, Chen Huaining, Liu Ying. Simulation of relieving welding residual stresses in the girth-weld stainless steel tube by induction heating method[J]. Pressure Vessel Technology, 2009, 26(5): 38-43. (in Chinese)

[6] Huang Yongjun. Study on technology and mechanism of laser-induction hybrid cladding[D]. Wuhan: Huazhong University of Science & Technology, 2009. (in Chinese)

[7] Oscar Lucía, Pascal Maussion, Enrique J Dede, et al. Induction heating technology and its applications: past developments, current technology, and future challenges[J]. IEEE Transactions on Industrial Electronics, 2014, 61(5): 2509-2520.

[8] Farahmand P, Liu S, Zhang Z, et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 2014, 40: 15421-15438.

[9] Yang Xiaohu, Zhang Anfeng, Li Dichen, et al. Influence of process parameters on self-healing ability in laser metal direct forming[J]. Chinese Journal of Lasers, 2011, 38(6): 0603023-1-7. (in Chinese)

[10] Qin Lanyun, Wang Ting, Yang Guang, et al. Experiment study on laser deposition repair BT20 alloy component[J]. Infrared and Laser Engineering, 2014, 43(2): 404-410. (in Chinese)

[11] ture and anti oxidation of MCrAlY coating by high-frequency induction aided laser cladding[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2012, 44(1): 37-42. (in Chinese)

Gao Xuesong, Tian Zongjun, Huang Yinhui, et al. Microstruc-

[12] Xi Mingzhe, Gao Shiyou. Heat-treated microstructures and mechanical properties of TA15 Titanium alloy fabricated by laser rapid forming[J]. Chinese Journal of Lasers, 2012, 39(1): 0103007-1-6. (in Chinese)

[13] Zhang Xiaohong, Lin Xin, Chen Jing, et al. Effects of heat treatment on the microstructures and mechanical properties of TA15 titanium alloys by laser solid forming[J]. Rare Metal Materials and Engineering, 2011, 40(1): 142-147. (in Chinese)

[14] Yuan Hong, Fang Yanli, Wang Huaming. Influence of heat treatment on microstructure and compressive property of laser melting deposited TA15 titanium alloy[J]. Infrared and Laser Engineering, 2010, 39(4): 746-750. (in Chinese)

[15] Kong Yuan. Research on the key technology of produce metal parts by laser rapid prototyping method[D]. Shenyang: Shenyang Institute of Automation, Chinese Academy of Sciences, 2012. (in Chinese)

[16] Yang Jian, Chen Jing, Yang Haiou, et al. Experimental study on residual distribution of laser rapid forming process [J]. Rare Metal Materials and Engineering, 2004, 33(12): 1304-1307. (in Chinese)