• Infrared and Laser Engineering
  • Vol. 46, Issue 3, 317001 (2017)
Yan Huipeng*, Yang Zhengwei, Tian Gan, Ming Anbo, and Zhang Wei
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/irla201746.0317001 Cite this Article
    Yan Huipeng, Yang Zhengwei, Tian Gan, Ming Anbo, Zhang Wei. Micro crack detection near surface of ferromagnetic materials based on eddy current thermography[J]. Infrared and Laser Engineering, 2017, 46(3): 317001 Copy Citation Text show less
    References

    [1] Jiao Jingpin, Li Yongqiang, Du Li, et al. Study on the compound imaging method for crack detection in plate structure using array of Lamb waves [J]. Chinese Journal of Scientific Instrument, 2016, 3703: 593-601. (in Chinese)

    [2] Deng Rui, Chen Zhiyuan. Numerical investigation for ductile fracture of metal based on GTN model [J]. Foreign Electronic Measurement Technology, 2015, 34(2): 78-81.(in Chinese)

    [3] Feng Fuzhou, Zhang Chaosheng, Min Qingxu, et al. Heating characteristics of metal plate crack in sonic IR imaging [J].Infrared and Laser Engineering, 2015, 44(5): 1456-1461.(in Chinese)

    [4] Qin Lei, Liu Junyan, Gong Jinlong, et al. Testing surface crack defects of sheet metal with ultrasonic lock-in thermography [J]. Infrared and Laser Engineering, 2013, 42(5): 1123-1130. (in Chinese)

    [5] Zhou Deqiang, Wang Jun, Zhang Qiuju, et al. Research on sensing mechanism of ferromagnetic component flaw using pulsed eddy current testing [J]. Chinese Journal of Scientific Instrument, 2015, 3605: 989-995. (in Chinese)

    [6] Fu Jianjin, Lei Yinzhao. Study on sinusoidal eddy current test method for ferromagnetic plate parameters [J]. Chinese Journal of Scientific Instrument, 2016, 3703: 617-622. (in Chinese)

    [7] Wang Xun, Jin Wanping, Zhang Cunlin, et al. Actuality & evolvement of infrared thermal wave nondestructive imaging technology [J]. Nondestructive Testing, 2004, 26(10): 497-501.

    [8] Zainal Abidin I, Tian G Y, Wilson J, et al. Quantitative evaluation of angular defects by pulsed eddy current thermography [J]. NDT and International, 2010, 43(7): 537-546.

    [9] Zenzinger G, Bamberg J, Satzger W, et al. Thermographic crack detection by eddy current excitation [J]. Nondestructive Testing and Evaluation, 2007, 22(2-3): 101-111.

    [10] Liu F, Yang S, Leng C, et al. Simulation on quantitative analysis of crack inspection by using eddy current stimulated thermography [J]. New Technology & Application, Far East Forum on Nondestructive Evaluation/testing, 2013: 59-64.

    [11] Chang Dong, Zuo Xianzhang, Tian Guiyun, et al. Analysis of the crack orientation effect on pulsed eddy current stimulated thermography [J]. Journal of Shagnhai Jiao Tong University, 2013, 47(5): 779-785. (in Chinese)

    [12] Sun Xiaoying, Hou Dexin, Ye Shuliang. Research on response of pulse eddy current thermography under parallel excitation [J]. Laser & Infrared, 2015, 45(4): 393-399. (in Chinese)

    [13] Parker W J, Jenkins R J, Butler C P, et al. Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity [J]. Journal of Applied Physics, 1961, 32(9): 1639-1684.

    [14] Carlaw H S, Jaeger J C. Conduction of Heat in Solids [M]. New York: Osford University Press, 1959.

    CLP Journals

    [1] Yang Zhengwei, Xie Xingyu, Li Yin, Zhang Wei, Tian Gan. Influence analysis of key parameters in laser scanning thermography nondestructive testing[J]. Infrared and Laser Engineering, 2019, 48(11): 1105008

    [2] Wang Xiaona, Yao Xingzhou, Hou Dexin, Ye Shuliang. Detection of microcrack in cylinder ferrite components based on scanning laser thermography[J]. Infrared and Laser Engineering, 2018, 47(11): 1106005

    Yan Huipeng, Yang Zhengwei, Tian Gan, Ming Anbo, Zhang Wei. Micro crack detection near surface of ferromagnetic materials based on eddy current thermography[J]. Infrared and Laser Engineering, 2017, 46(3): 317001
    Download Citation