Researching | Thick SiC Green Bodies: Degreasing Analysis and Pressureless High Density Sintering

Journals >Journal of Inorganic Materials >Volume 38 >Issue 10 >Page 1163 > Article

Journal of Inorganic Materials
Vol. 38, Issue 10, 1163 (2023)

Thick SiC Green Bodies: Degreasing Analysis and Pressureless High Density Sintering

Yihua HUANG¹, Zhengren HUANG¹, Wenhao SHA^1,2, Yabin ZHOU¹..., Zhouxi TAN^1,2 and Mingkang ZHANG¹|Show fewer author(s)

Author Affiliations

¹1. State Key Laboratory of High-Performance Ceramics and Ultrastructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China

²2. College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing 100049, China

show less

DOI: 10.15541/jim20230126 Cite this Article

Yihua HUANG, Zhengren HUANG, Wenhao SHA, Yabin ZHOU, Zhouxi TAN, Mingkang ZHANG. Thick SiC Green Bodies: Degreasing Analysis and Pressureless High Density Sintering[J]. Journal of Inorganic Materials, 2023, 38(10): 1163 Copy Citation Text

show less

References

[1] M FLINDERS, D RAY, A ANDERSON et al. High-toughness silicon carbide as armor. J. Am. Ceram. Soc., 2217(2005).

[2] L STOBIERSKI, A GUBERNAT. Sintering of silicon carbide I.effect of carbon. Ceram. Int., 287(2003).

[3] L STOBIERSKI, A GUBERNAT. Sintering of silicon carbide II. effect of boron. Ceram. Int., 355(2003).

[4] M S DATTA, A K BANDYOPADHYAY, B CHAUDHURI. Sintering of nano crystalline alpha silicon carbide by doping with boron carbide. Bull. Mat. Sci., 181(2002).

[5] B S KOZEKANAN, A MORADKHANI, H BAHARVANDI et al. Mechanical properties of SiC-C-B₄C composites with different carbon additives produced by pressureless sintering. Int. J. Appl. Ceram. Technol., 957(2021).

[6] M RACZKA, G GORNY, L STOBIERSKI et al. Effect of carbon content on the microstructure and properties of silicon carbide- based sinters. Mater. Charact., 245(2001).

[7] R X SUN, X D WEI, W T HU et al. Nanocrystalline cubic silicon carbide: a route to superhardness. Small, 6(2022).

[8] P SAJGALIK, Z L CHENG, X X HAN et al. Ultra-high creep resistant SiC ceramics prepared by rapid hot pressing. J. Eur. Ceram. Soc., 820(2022).

[9] P SAJGALIK, J SEDLACEK, Z LENCES et al. Additive-free hot-pressed silicon carbide ceramics-A material with exceptional mechanical properties. J. Eur. Ceram. Soc., 1333(2016).

[10] Z A YASAR, V A DELUCCA, R HABER. Effect of carbon source on the properties of dense alpha-SiC. Mater. Res. Express, 11(2021).

[11] Z A YASAR, V A DELUCCA, R A HABER. Effect of boron carbide additive and sintering temperature—dwelling time on silicon carbide properties. Ceram. Int., 7177(2021).

[17] A KAZA, M J MATTHEWSON, D NIESZ et al. A model of gas-phase transport during the initial stages of sintering of silicon carbide. J. Am. Ceram. Soc., 2517(2009).

[19] H P CHEN, H P YANG, F D JU et al. The influence of pressure and temperature on coal pyrolysis/gasification. Asia-Pac. J. Chem. Eng., 203(2007).

Get PDF(in Chinese)

Figures&Tables (9)

References (13)

Copy Citation Text

Yihua HUANG, Zhengren HUANG, Wenhao SHA, Yabin ZHOU, Zhouxi TAN, Mingkang ZHANG. Thick SiC Green Bodies: Degreasing Analysis and Pressureless High Density Sintering[J]. Journal of Inorganic Materials, 2023, 38(10): 1163

Download Citation

Save the article for my favorites

Paper Information

Recommended Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology

Set citation alerts for the article

Please enter your email address