• Infrared and Laser Engineering
  • Vol. 47, Issue 11, 1106005 (2018)
Wang Xiaona*, Yao Xingzhou, Hou Dexin, and Ye Shuliang
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/irla201847.1106005 Cite this Article
    Wang Xiaona, Yao Xingzhou, Hou Dexin, Ye Shuliang. Detection of microcrack in cylinder ferrite components based on scanning laser thermography[J]. Infrared and Laser Engineering, 2018, 47(11): 1106005 Copy Citation Text show less
    References

    [1] Yan Huipeng, Yang Zhengwei, Tian Gan, et al. Micro crack detection near surface of ferromagnetic materials based on eddy current thermography[J]. Infrared and Laser Engineering, 2017, 46(3): 0317001. (in Chinese)

    [2] Nan Gangyang, Wang Qiwu, Zhang Zhenzhen, et al. Rail steel flaw inspection based on laser ultrasonic method[J]. Infrared and Laser Engineering, 2017, 46(1): 0106006. (in Chinese)

    [3] Burrows S E, Dixon S, Pickering S G, et al. Thermographic detection of surface breaking defects using a scanning laser source[J]. NDT & E International, 2011, 44(7): 589-596.

    [4] Schlichting J, Ziegler M, Maierhofer C, et al. Flying laser spot thermography for the fast detection of surface breaking cracks[C]//18th World Conference on Nondestructive Testing, 2012.

    [5] Kubiak E J. Infrared detection of fatigue cracks and other near-surface defects[J]. Applied Optics, 1968, 7(7): 1743-1748.

    [6] An Y K, Yang J, Hwang S, et al. Line laser lock-in thermography for instantaneous imaging of cracks in semiconductor chips[J]. Optics & Lasers in Engineering, 2015, 73(1): 128-136.

    [7] Li T, Almond D P, Rees D A S, et al. Crack imaging by pulsed laser spot thermography[C]//Journal of Physics Conference Series, 2010.

    [8] Fedala Y, Streza M, Sepulveda F, et al. Infrared lock-in thermography crack localization on metallic surfaces for industrial diagnosis[J]. Journal of Nondestructive Evaluation, 2013, 33(3): 970-972.

    [9] Gruss C, Balageas D. Theoretical and experimental applications of the flying spot camera[C]//Conference on Quantitative Infrared Thermography, 1992.

    [10] Hermosillalara S, Joubert P Y, Placko D. Identification of physical effects in flying spot photothermal non-destructive testing[J]. European Physical Journal Applied Physics, 2003, 24(3): 223-229.

    [11] Li T, Almond D P, Rees D A S. Crack imaging by scanning laser-line thermography and laser-spot thermography[J]. Measurement Science & Technology, 2011, 22(3): 315-322.

    [12] Lugin S. Detection of hidden defects by lateral thermal flows[J]. NDT & E International, 2013, 56(2): 48-55.

    [13] Wang Xiaoning, Hou Dexin, Ye Shuliang. Crack detection of ferrite based on laser spot thermography[J]. Laser & Infrared. 2015, 45(11): 1298-1303. (in Chinese)

    [14] Wang Xiaona, Wang Xiaoning, Hou Dexin, et al. Surface crack imaging based on delayed temperature difference at symmetric points by laser spot thermography[J]. Instrumentation, 2014, 1(2): 30-37.

    [15] Wang Y Q, Kuo P K, Favro L D, et al. Flying laser spot thermal wave IR imaging of horizontal and vertical cracks[J]. Review of Progress in Quantitative Nondestructive Evaluation, 1990, 9: 511-516.

    [16] Hidalgogato R, Andrés J R, Lópezhiguera J M, et al. Quantification by signal to noise ratio of active infrared thermography data processing techniques[J]. Optics & Photonics Journal, 2013, 3(4): 20-26.

    [17] Schlichting J, Maierhofer C, Kreutzbruck M. Defect sizing by local excitation thermography[J]. Quantitative Infrared Thermography Journal, 2011, 8(1): 51-63.

    CLP Journals

    [1] Xinhao Zhu, Dexin Hou, Shuliang Ye. Dual linear array laser thermography detection of arbitrary direction cracks on cylindrical surface[J]. Infrared and Laser Engineering, 2020, 49(9): 20200097

    [2] Xiaona Wang, Yishu Zhang, Dexin Hou, Shuliang Ye. Detection of microcrack in inductor based on orthogonal scanning line laser thermography[J]. Infrared and Laser Engineering, 2020, 49(7): 20190522

    Wang Xiaona, Yao Xingzhou, Hou Dexin, Ye Shuliang. Detection of microcrack in cylinder ferrite components based on scanning laser thermography[J]. Infrared and Laser Engineering, 2018, 47(11): 1106005
    Download Citation