[1] Hill K O, Fujii Y, Johnson D C, et al. Photosensitivity in optical fiber waveguides: Application to reflection fiber fabrication［J］. Applied Physics Letters, 1978, 32(10): 647-649.
[2] Meltz G, Morey W W, Glenn W H. In-fibre Bragg grating tap［C］. Optical Fiber Communication Conference, San Francisco, 1990, TUG: TUG1.
[3] Kashyap R, Wyatt R, Campbell R J. Wideband gain flattened erbium fiber amplifier using a photosensitive fiber blazed grating［J］. Electronics Letters, 1993, 29(2): 154-156.
[4] Kashyap R, Wyatt R, Mckee P F. Wavelength flattened saturated erbium amplifier using multiple side-tip Bragg gratings［J］. Electronics Letters, 1993, 29(11): 1025-1026.
[5] Kerrinckx E, Hidayat A, Niay P. Suppression of discrete cladding mode resonances in fiber slanted Bragg gratings for gain equalisation［J］. Optics Express, 2006, 14(4): 1388-1394.
[6] Haggans C W, Singh H, Varner W F, et al. Narrow-band rejection filters with negligible back reflection using tilted photoinduced gratings in single-mode fibers［J］. IEEE Photonics Technology Letters, 1998, 10(5): 690-692.
[7] Mihailov S J, Walker R B, Lu P, et al. UV-induced polarisation-dependent loss in tilted fiber Bragg gratings: Application of a PDL equaliser［J］. IEE Proceedings-Optoelectronics, 2002, 149(56): 211-216.
[8] Zhou K, Chen X, Simpson A G, et al. High extinction ratio in-fiber polarizer based on 45° tilted fiber Bragg gratings［J］. Optics Letters, 2005, 30(11): 1285-1287.
[9] Chen C, Caucheteur C, Mégret P, et al. The sensitivity characteristics of tilted fiber Bragg grating sensors with different cladding thickness［J］. Measurement Science and Technology, 2007, 18(10): 3117-3122.
[10] Baek S, Jeong Y, Lee B. Characteristics of short-period blazed fibre Bragg gratings for use as macro-bending sensors［J］. Applied Optics, 2002, 41(4): 631-636.
[11] Caucheteur C, Chah K, Lhommé F, et al. Simultaneous bend and temperature sensor using tilted FBG［C］. SPIE, 2005, 5855: 707-710.
[12] Maguis S, Laffont G, Ferdinand P, et al. Biofunctionalized tilted fiber Bragg gratings for label-free immunosensing［J］. Optics Express, 2008, 16(23): 19049-19062.
[13] Yanina Y, Shevchenko Y, Albert J. Plasmon resonances in gold-coated tilted fiber Bragg gratings［J］. Optics Letters, 2007, 32(3): 211-213.
[14] Yang D X, Du L, Xu Z Q, et al. Magnetic field sensing based on tilted fiber Bragg grating coated with nanoparticle magnetic fluid［J］. Applied Physics Letters, 2014, 104(6): 061903.
[15] Liu F, Guo T, Wu C, et al. Wideband-adjustable reflection-suppressed rejection filters using chirped and tilted fiber gratings［J］. Optics Express, 2014, 22(20): 24430-24438.
[16] Richardson D J, Nilsson J, Clarkson W A. High power fiber lasers: Current status and future perspectives［J］. Journal of the Optical Society of America B, 2010, 27(11): B63-B92.
[17] Nilsson J, Payne D N. High-power fiber lasers［J］. Science, 2011, 332(6032): 921-922.
[18] Shiner B. The impact of fiber laser technology on the world wide material processing market［C］. Proceedings of CLEO, 2013, AF2J: AF2J.1.
[19] Wang Wenliang. Stimulated Raman scattering in high power fiber lasers［D］. Changsha: National University of Defense Technology, 2014.
[20] Wang Y, Xu C Q, Hong P. Analysis of Raman and thermal effects in kilowatt fiber lasers［J］. Optics Communications, 2004, 242(4): 487-502.
[21] Fini J M, Mermelstein M D, Yan M F, et al. Distributed suppression of stimulated Raman scattering in an Yb-doped filter-fiber amplifier［J］. Optics Letters, 2006, 31(17): 2550-2552.
[22] Nodop D, Jauregui C, Jansen F, et al. Suppression of stimulated Raman scattering employing long period gratings in double-clad fiber amplifiers［J］. Optics Letters, 2010, 35(17): 2982-2984.
[23] Albert J, Shao L Y, Caucheteur C. Tilted fiber Bragg grating sensors［J］. Laser and Photonics Review, 2013, 7(1): 83-108.
[24] Erdogan T. Cladding-mode resonances in short and long period fiber grating filters［J］. Journal of Optical Society of America A, 1997, 14(8): 1760-1773.
[25] Agrawal G P. Nonlinear fiber optics［M］. New York: Academic Press, 1995: 195-211.
