[1] D M Shupe. Thermally induced nonreciprocity in the fiber optic interferometer[J]. Appl Opt, 1980, 19(5): 654-655.

[2] Yang Yuanhong, Meng Chenxue. Research on the characteristic of bias error and noise analysis method of fiber optic gyroscope[J]. Acta Optica Sinica, 2014, 34(12): 1206006.

[3] Han Zhengying, Gao Yeheng, Zhao Yao. Quality inspection and assessment technology of fiber optic gyro fiber coil[J]. Acta Optica Sinica, 2014, 34(s2): S206012.

[4] N J Frigo. Compensation of linear sources of nonreciprocity in Sagnac interferometers[C]. SPIE, 1983, 0412: 268-271.

[5] Xu Mengrong, Cao Jianqiu, Huang Zhihe, et al.. Study of fiber coiling methods and pump light absorption[J]. Acta Optica Sinica, 2014, 34(s1): S106008.

[6] Yan Fengping, Lan Huijuan, Jian Shuisheng. Investigation of temperature compensated method for fiber optic gyros[J]. Acta Optica Sinica, 1999, 19(7): 968-974.

[7] Gao Zhongxing, Zhang Yonggang, Wang Guochen, et al.. Analysis and simulation for the thermal performance of the octupolar fiber coil[J]. Optical Engineering, 2014, 53(1): 016114.

[8] Yu Yongqing, Wang Yueze, Ma Lin, et al.. Temperature transient model in FOG fiber coil with cross winding [J]. Journal of Chinese Inertial Technology, 2013, 21(5): 687-691.

[9] Marty Williams. Optical fiber placement for crossover-free fiber optic gyros[C]. SPIE, 2006, 6314: 63140I.

[10] Du Shisen, Guan Yueming, Jin Jing, et al.. Finite element model of thermal transient effect for crossover-free fiber optic gyros[J]. Optik, 2012, 123(8): 748-751.

[11] Chen Xiyuan, Shen Chong. Study on error calibration of fiber optic gyroscope under intense ambient temperature variation[J]. Appl Opt, 2012, 51(17): 3755-3762.

[12] Li Jialei, Xu Hualong, He Jing. Temperature compensation of start-up drift for fiber optic gyroscope based on wavelet network[J]. Acta Optica Sinica, 2011, 31(5): 0506005.

[13] Liu Yuanyuan, Yang Gongliu, Li Siyi. Application of BP-AdaBoost model in temperature compensation for fiber optic gyroscope bias[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(2): 235-239.

[14] Li Jichen, Gao Fengqi, Wang Guanglong, et al.. Analysis of dynamic Allan variance for fiber optic gyro under vibration and variable temperature conditions[J]. Chinese J Lasers, 2013, 40(9): 0908004.

[15] O F J Tirat, J M Euverte. Finite element model of thermal transient effect in fiber optic gyro[C]. SPIE, 1996, 2837: 230-238.

[16] F Mohr. Thermo optically induced bias drift in fiber optical Sagnac interferometers[J]. Journal of Lightwave Technology, 1996, 14(1): 27-41.

[17] F Mohr, F Schadt. Bias error in fiber optic gyroscopes due to elastooptic interactions in the sensor fiber[C]. SPIE, 2004, 5502: 410-413.

[18] S H Her, C Y Huang. Thermal strain analysis of optic fiber sensors[J]. Sensors, 2013, 13(2):1846-1855.

[19] Zhang Yonggang, Gao Zhongxing, Wang Guochen, et al.. Modeling of thermal-induced rate error for FOG with temperature ranging from -40 °C to 60 °C[J]. Photonics Techmology Letters, Leee, 2014, 26(1): 18-21.