Target-characteristics-based equivalent blur model for under-sampled imaging systems

YANG Cui; YIN Shu-Ting; ZHANG Yan-Tao; WU Xin

doi:10.11972/j.issn.1001-9014.2017.06.013

[1] Zhang X L, Meng Q D, Zhang L W, et al. Modeling and deformation analyzing of InSb focal plane arrays detector under thermal shock［J］. Infrared Physics and Technology, 2014, 42(63): 28-34.

[2] Gravrand O, Baier N, Ferron A, et al. MTF issues in small-pixel-pitch planar quantum IR detectors［J］. Journal of Electronic Materials, 2014, 43(8):3025-3032.

[3] Cui J P, Wang J H, Jin W Q, et al. Research on the sampling performance of the focal plane array thermal imaging systems［C］. Proc. of SPIE, 2011, 8193: 81933O.

[4] Holst G C What causes sampling artifacts［C］. Proc. of SPIE, 2008, 6941: 694102.

[5] Gillette J C, Stadtmiller T M, Hardie R C. Aliasing reduction in staring infrared imaging utilizing subpixel techniques［J］. Optical Engineering, 1995, 34(11):3130-3137.

[6] Sato K, Shidahara M, Goto M. Aliased noise in X-ray CT images and band limiting processing as a preventive measure［J］. Radiological Physics and Technology, 2015, 8(2):178-192.

[7] Fanning J D, Reynolds J P. Target identification performance of superresolution versus dither［C］. Proc. of SPIE, 2008, 6941: 69410N.

[8] Bijl P, Hogervorst M A. NVThermIP vs TOD: matching the target acquisition range criteria［C］. Proc. of SPIE, 2007, 6543:65430C.

[9] Vollmerhausen R H, Jacobs E, Driggers R. New metric for predicting target acquisition performance［J］. Optical Engineering, 2004, 43(11):2806-2818.

[10] Preece B L, Haefner D P. Performance assessment of treating aliased signal as target-dependent noise［C］. Proc. of SPIE, 2011, 8014, 80140H.

[11] Vollmerhausen R H, Driggers R, Wilson D L. Predicting range performance of sampled imagers by treating aliased signal as target-dependent noise［J］. Journal of the Optical Society of America A, 2009, 26(11):2418-2418.

[12] Driggers R G, Vollmerhausen R, O’Kane B L. Equivalent blur as a function of spurious response of a sampled imaging system: application to character recognition［J］. Journal of the Optical Society of America A, 1999, 16(5):1026-1033.

[13] McAnany J J, Alexander K R. Spatial contrast sensitivity in dynamic and static additive luminance noise［J］. Vision Research, 2010, 50(19):1957-1965.

[14] Meitzler T, Gerhardt G, Cook T, et al. Spatial aliasing effects in ground vehicle IR imagery［C］. Proc. of SPIE, 1992, 1689:226-241.

[16] Li Q, Yang C, Zhang J Q. Target acquisition performance in a cluttered environment［J］. Applied Optics, 2012, 51(31):7668-7673.

[17] Bex P, Solomon S G. Contrast sensitivity in natural scenes depends on edgeas well as spatial frequency structure［J］. Journal of Vision, 2009, 9(10):1-19.

[18] Holst G C, Lomheim T S. CMOS/CCD sensors and camera systems (2nd Ed.)［M］. USA: JCD Publishing, 2011.

[19] Schade Sr O H. Image reproduction by a line raster process［M］.Chapter part of Perception of Displayed Information, New York: Plenum Press, 1973:233-278.

[20] Kennedy H V. Modeling second generation thermal imaging systems［J］. Optical Engineering, 1991, 30(11):1771-1778.

[21] Holst G C. An engineer's approach to system performance［C］. Proc. of SPIE, 2007, 6543:65430A.

[22] Holst G C. Electro-optical imaging system performance［M］. Florida: JCD Publishing, 2000.

[23] Vollmerhausen R H, Jacobs E. The targeting task performance (TTP) metric a new model for predicting target acquisition performance［R］. NVESD, 2004.