Impulse coupling characteristics of typical metal materials irradiated by nanosecond laser with a millimeter-scale spot size

Chenghao Yu; Weijing Zhou; Hao Chang; Yifu Chen; Wei Guo

doi:10.3788/IRLA20200390

[1] B Kang, X Jin, H Chang. Simulation analysis of orbit characteristics of space debris irradiated by space-based laser system. Infrared and Laser Engineering, 46, 0329005(2017).

[2] H Chang, J Ye, W Zhou, et al. Analysis of attitude influence of nano-satellite platform by micro thrust output of fuel tape micro laser thruster. Infrared and Laser Engineering, 48, S213001(2019).

[3] M Wen, N Li, J Wu. Experimental study on impulse coupling characteristics of 532 nm/1 064 nm laser ablated Al target. Infrared and Laser Engineering, 46, S106005(2017).

[4] D Tran, A Yogo, H Nishimura, et al. Impulse and mass removal rate of aluminum target by nanosecond laser ablation in a wide range of ambient pressure. Journal of Applied Physics, 122, 233304(2017).

[5] Sinko J E, Ichihashi K, Tsukiyama Y, et al. CO2 laser ablation propulsion area scaling with polyoxymethylene propellant[C]Scottsdale (Arizona): 2010: 207–218.

[6] H Tsuruta, O Dondelewski, Y Katagiri, et al. Ablation spot area and impulse characteristics of polymers induced by burst irradiation of 1 µm laser pulses. Acta Astronautica, 136, 46-54(2017).

[7] J E Sinko, C R Phipps. Modeling CO₂ laser ablation impulse of polymers in vapor and plasma regimes. Applied Physics Letters, 95, 131105(2009).

[8] Y Wang, C Deng, Y Su, et al. Study on in-situ measurement of laser spot size on target surface. Laser & Infrared, 49, 1054-1059(2019).

[9] X Li, W Wei, J Wu, et al. The Influence of spot size on the expansion dynamics of nanosecond-laser-produced copper plasmas in atmosphere. Journal of Applied Physics, 113, 243304(2013).

[10] W Zhou, H Chang, J Ye, et al. Impulse of planar and sphere target by nanosecond laser ablation in a large beam spot. Laser Physics, 30, 066002(2020).

[11] S B Boyden, Y Zhang. Temperature and wavelength-dependent spectral absorptivities of metallic materials in the infrared. Journal of Thermophysics and Heat Transfer, 20, 9-15(2006).

[12] C R Phipps, J R Luke, T Lippert, et al. Micropropulsion using laser ablation. Applied Physics A, 79, 1385-1389(2004).

[13] M Schneider, L Berthe, R Fabbro, et al. Measurement of laser absorptivity for operating parameters characteristic of laser drilling regime. Journal of Physics D: Applied Physics, 41, 155502(2008).

[14] C R Phipps, T P Turner, R F Harrision, et al. Impulse coupling to targets in vacuum by KrF, HF, and CO₂ single‐pulse lasers. Journal of Applied Physics, 64, 1083-1096(1988).

[15] B WANG. Laser ablation impulse generated by irradiating aluminum target with nanosecond laser pulses at normal and oblique incidence. Applied Physics Letters, 110, 014101(2017).

[16] H Chang, X Jin, J Ye, et al. Flow field characteristics of nanosecond pulsed laser ablation propulsion with typical materials under vacuum conditions. Journal of Propulsion Technology, 38, 1427-1433(2017).

[17] X T Zhao, F Tang, B HAN, et al. The influence of laser ablation plume at different laser incidence angle on the impulse coupling coefficient with metal target. Journal of Applied Physics, 120, 213103(2016).

[18] H Chang, X Jin, M Wen, et al. Analytical model for calculating laser ablation impulse coupling coefficient. High Power Laser and Particle Beams, 25, 1110-1114(2013).