[1] U M CHOI, F BLAABJERG, S JORGENSEN et al. Power cycling test and failure analysis of molded intelligent power IGBT module under different temperature swing durations. Microelectronics Reliability, 64: 403(2016).
[2] M CABELLO, V SOLER, G RIUS et al. Advanced processing for mobility improvement in 4H-SiC MOSFETs: a review. Materials Science in Semiconductor Processing, 78: 22(2018).
[3] C BUTTAY, D PLANSON, B ALLARD et al. State of the art of high temperature power electronics. Materials Science and Engineering: B, 283(2011).
[4] C R EDDY, D K GASKILL. Silicon carbide as a platform for power electronics. Science, 1398(2009).
[5] N MURAYAMA, K HIRAO, M SANDO et al. High-temperature electro-ceramics and their application to SiC power modules. Ceramics International, 3523(2018).
[6] H OKUMURA. Present status and future prospect of widegap semiconductor high-power devices. Japanese Journal of Applied Physics, 7565(2006).
[7] K HIRAO, Y ZHOU, H MIYAZAKI. 3-Substrate. Wide bandgap power semiconductor packaging. Woodhead Publishing.
[8] M KITAYAMA. High thermal conductivity ceramics. Encyclopedia of materials:technical ceramics and glasses, 165.
[9] S FUKUDA, K SHIMADA, N IZU et al. Crack generation in electroless nickel plating layers on copper-metallized silicon nitride substrates during thermal cycling. Journal of Materials Science: Materials in Electronics, 8278(2017).
[10] F L RILEY. Silicon nitride and related materials. Journal of the American Ceramic Society, 245(2000).
[11] J S HAGGERTY, A LIGHTFOOT. Opportunities for enhancing the thermal conductivities of SiC and Si3N4 ceramics through improved processing. Ceramic Engineering and Science Proceedings., : 475(1995).
[12] Z KRSTIC, V D KRSTIC. Silicon nitride: the engineering material of the future. Journal of Materials Science, 535(2012).
[13] K HIRAO, K WATARI, H HAYASHI et al. High thermal conductivity silicon nitride ceramic. MRS Bulletin, 451(2001).
[14] K HIRAO, Y ZHOU, H HYUGA et al. High thermal conductivity silicon nitride ceramics. Journal of the Korean Ceramic Society, 380(2012).
[15] K WATARI. High thermal conductivity non-oxide ceramics. Journal of the Ceramic Society of Japan, S7(2001).
[16] Y ZHOU, H HYUGA, D KUSANO et al. A tough silicon nitride ceramic with high thermal conductivity. Advanced Materials, 4563(2011).
[17] M KITAYAMA, K HIRAO, A TSUGE et al. Oxygen content in ß-Si3N4 crystal lattice. Journal of the American Ceramic Society, 3263(1999).
[18] M KITAYAMA, K HIRAO, A TSUGE et al. Thermal conductivity of β-Si3N4: II, effect of lattice oxygen. Journal of the American Ceramic Society, 1985(2000).
[19] D KUSANO, Y NODA, H SHIBASAKI et al. Effects of impurity iron content on characteristics of sintered reaction-bonded silicon nitride. International Journal of Applied Ceramic Technology, 690(2013).
[20] C MATSUNAGA, Y ZHOU, D KUSANO et al. Dielectric breakdown of silicon nitride substrates with various thicknesses. Journal of the Ceramic Society of Japan, 693(2018).
[21] Y NAKASHIMA, H HYUGA, K HIRAO et al. Thickness dependence of dielectric breakdown strength for silicon nitride substrate. Journal of the Ceramic Society of Japan, 761(2021).
[22] S FUKUDA, K SHIMADA, N IZU et al. Relationship between the thermal stress and structures of thermal-cycling-induced cracks in electroless nickel plating on metalized substrates. Journal of Materials Science: Materials in Electronics, 5820(2019).
[23] H MIYAZAKI, K HIRAO, H HYUGA. Round-robin exercise on the three- and four-point flexural strength of thin ceramic plates for power modules. International Journal of Applied Ceramic Technology, 2121(2019).
[24] N WAKASUGI, C CHEN, K HIRAO et al. Thermal evaluation of metalized ceramic substrates for use in next-generation power modules toward international standardization(2020).
[25] K HIRAO, Y ZHOU, H HYUGA et al. Evaluation of thermal resistance for metalized ceramic substrates using a microheater chip. International Journal of Applied Ceramic Technology, 232(2021).
[26] G A SLACK. Nonmetallic crystals with high thermal conductivity. Journal of Physics and Chemistry of Solids, 321(1973).
[27] G A SLACK, R A TANZILLI, R O POHL et al. The intrinsic thermal conductivity of AIN.. Journal of Physics and Chemistry of Solids, 641(1987).
[28] Y TAKEDA. Development of high-thermal-conductivity SiC ceramics. American Ceramic Society Bulletin, 1961(1988).
[29] H NAKANO, K WATARI, H HAYASHI et al. Microstructural characterization of high-thermal-conductivity aluminum nitride ceramic. Journal of the American Ceramic Society, 3093(2002).
[30] S HAMPSHIRE, H K PARK, D P THOMPSON et al. α’-Sialon ceramics. Nature, 880(1978).
[31] M KRäMER, D WITTMÜSS, H KÜPPERS et al. Relations between crystal structure and growth morphology of β-Si3N4. Journal of Crystal Growth, 157(1994).
[32] A THOMAS, G MÜLLER. Determination of the concentration of oxygen dissolved in the AlN lattice by hot gas extraction from AlN ceramics. Journal of the European Ceramic Society, 11(1991).
[33] N HIROSAKI, Y OKAMOTO, M ANDO et al. Thermal conductivity of gas-pressure-sintered silicon nitride. Journal of the American Ceramic Society, 2878(1996).
[34] N HIROSAKI, Y OKAMOTO, M ANDO et al. Effect of grain growth on the thermal conductivity of silicon nitride. Journal of the Ceramic Society of Japan, 49(1996).
[35] M KITAYAMA, K HIRAO, M TORIYAMA et al. Thermal conductivity of ß-Si3N4: I, effects of various microstructural factors. Journal of the American Ceramic Society, 3105(1999).
[36] H F PRIEST, F C BURNS, G L PRIEST et al. Oxygen content of alpha silicon nitride. Journal of the American Ceramic Society, 395(1973).
[37] M PEUCKERT, P GREIL. Oxygen distribution in silicon nitride powders. Journal of Materials Science, 22: 3717(1987).
[38] K KIJIMA, K KATO, Z INOUE et al. Oxygen content of α-Si3N4 single crystals. Journal of Materials Science, 362(1975).
[39] N HIROSAKI, A OKADA, K MATOBA. Sintering of Si3N4 with the addition of rare-earth-oxides. Journal of the American Ceramic Society, C144(1988).
[40] M KITAYAMA, K HIRAO, S KANZAKI. Effect of rare earth oxide additives on the phase transformation rates of Si3N4. Journal of the American Ceramic Society, 2612(2006).
[41] P F BECHER, G S PAINTER, N SHIBATA et al. Effects of rare-earth (RE) intergranular adsorption on the phase transformation, microstructure evolution, and mechanical properties in silicon nitride with RE2O3+MgO additives: RE=La, Gd, and Lu.. Journal of the American Ceramic Society, 2328(2008).
[42] P F BECHER, N SHIBATA, G S PAINTER et al. Observations on the influence of secondary Me oxide additives (Me=Si, Al, Mg) on the microstructural evolution and mechanical behavior of silicon nitride ceramics containing RE2O3(RE=La, Gd, Lu). Journal of the American Ceramic Society, 570(2010).
[43] M KITAYAMA, K HIRAO, K WATARI et al. Thermal conductivity of β-Si3N4: III, effect of rare-earth (RE = La, Nd, Gd, Y, Yb, and Sc) oxide additives. Journal of the American Ceramic Society, 353(2001).
[44] H YOKOTA, S YAMADA, M IBUKIYAMA. Effect of large β-Si3N4 particles on the thermal conductivity of β-Si3N4 ceramics. Journal of the European Ceramic Society, 1175(2003).
[45] H YOKOTA, M IBUKIYAMA. Effect of lattice impurities on the thermal conductivity of β-Si3N4. Journal of the European Ceramic Society, 55(2003).
[46] H YOKOTA, H ABE, M IBUKIYAMA. Effect of lattice defects on the thermal conductivity of β-Si3N4. Journal of the European Ceramic Society, 1751(2003).
[47] H YOKOTA, M IBUKIYAMA. Effect of the addition of β-Si3N4 nuclei on the thermal conductivity of β-Si3N4ceramics. Journal of the European Ceramic Society, 1183(2003).
[48] H YOKOTA, M IBUKIYAMA. Microstructure tailoring for high thermal conductivity of β-Si3N4 ceramics. Journal of the American Ceramic Society, 197(2003).
[49] K NEGITA. Effective sintering aids for Si3N4 ceramics. Journal of Materials Science Letters, 755(1985).
[50] Y OKAMOTO, N HIROSAKI, M ANDO et al. Effect of sintering additive composition on the thermal conductivity of silicon nitride. Journal of Materials Research, 3473(1998).
[51] N HIROSAKI, Y OKAMOTO, F MUNAKATA et al. Effect of seeding on the thermal conductivity of self-reinforced silicon nitride. Journal of the European Ceramic Society, 2183(1999).
[52] H HAYASHI, K HIRAO, M TORIYAMA et al. MgSiN2 addition as a means of increasing the thermal conductivity of β-silicon nitride. Journal of the American Ceramic Society, 3060(2001).
[53] J YE, A OKADA. Microthermal analysis of heat conduction in silicon nitrides. Journal of the American Ceramic Society, 1365(2003).
[54] X ZHU, Y ZHOU, K HIRAO et al. Processing and thermal conductivity of sintered reaction-bonded silicon nitride. I: effect of Si powder characteristics. Journal of the American Ceramic Society, 3331(2006).
[55] Y ZHOU, X ZHU, K HIRAO et al. Sintered reaction-bonded silicon nitride with high thermal conductivity and high strength. International Journal of Applied Ceramic Technology, 119(2008).
[56] X W ZHU, Y SAKKA, Y ZHOU et al. Effect of MgSiN2 addition on gas pressure sintering and thermal conductivity of silicon nitride with Y2O3. Journal of the Ceramic Society of Japan, 706(2008).
[57] G H PENG, M LIANG, Z H LIANG et al. Spark plasma sintered silicon nitride ceramics with high thermal conductivity using MgSiN2as additives. Journal of the American Ceramic Society, 2122(2009).
[58] X ZHU, Y ZHOU, K HIRAO et al. Potential use of only Yb2O3 in producing dense Si3N4 ceramics with high thermal conductivity by gas pressure sintering. Science and Technology of Advanced Materials, 065001(2010).
[59] H M LEE, E B LEE, D L KIM et al. Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si3N4 ceramics. Ceramics International, 17466(2016).
[60] H LIANG, Y ZENG, K ZUO et al. Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives. Ceramics International, 15679(2016).
[61] J M KIM, S I KO, H N KIM et al. Effects of microstructure and intergranular glassy phases on thermal conductivity of silicon nitride. Ceramics International, 5441(2017).
[62] Y ZHOU, H HYUGA, D KUSANO et al. Effects of yttria and magnesia on densification and thermal conductivity of sintered reaction-bonded silicon nitrides. Journal of the American Ceramic Society, 1579(2019).
[63] Y LI, H N KIM, H WU et al. Enhanced thermal conductivity in Si3N4ceramic with the addition of Y2Si4N6C. Journal of the American Ceramic Society, 4128(2018).
[64] C YANG, Q LIU, B ZHANG et al. Effect of MgF2 addition on mechanical properties and thermal conductivity of silicon nitride ceramics. Ceramics International, 12757(2019).
[65] W WANG, D YAO, H CHEN et al. ZrSi2-MgO as novel additives for high thermal conductivity of β‐Si3N4 ceramics. Journal of the American Ceramic Society, 2090(2019).
[66] Y DUAN, J ZHANG, X LI et al. High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives. International Journal of Applied Ceramic Technology, 1399(2019).
[67] Y LI, H N KIM, H WU et al. Enhanced thermal conductivity in Si3N4 ceramic by addition of a small amount of carbon. Journal of the European Ceramic Society, 157(2019).
[68] Y LI, H N KIM, H WU et al. Microstructure and thermal conductivity of gas-pressure-sintered Si3N4 ceramic: the effects of Y2O3 additive content. Journal of the European Ceramic Society, 274(2021).
[69] H LIANG, W WANG, K ZUO et al. Effect of LaB6 addition on mechanical properties and thermal conductivity of silicon nitride ceramics. Ceramics International, 17776(2020).
[70] H LIANG, W WANG, K ZUO et al. YB2C2: a new additive for fabricating Si3N4 ceramics with superior mechanical properties and medium thermal conductivity. Ceramics International, 5239(2020).
[71] W WANG, D YAO, H LIANG et al. Effect of the binary nonoxide additives on the densification behavior and thermal conductivity of Si3N4ceramics. Journal of the American Ceramic Society, 5891(2020).
[72] W WANG, D YAO, H LIANG et al. Effect of in-situ formed Y2O3 by metal hydride reduction reaction on thermal conductivity of β-Si3N4 ceramics. Journal of the European Ceramic Society, 5316(2020).
[73] W WANG, D YAO, H LIANG et al. Novel silicothermic reduction method to obtain Si3N4 ceramics with enhanced thermal conductivity and fracture toughness. Journal of the European Ceramic Society, 1735(2021).
[74] L X WU, L L ZHU, Y YOU et al. Fabrication and properties of pressure-sintered reaction-bonded Si3N4 ceramics with addition of Eu2O3-MgO-Y2O3. Ceramics International, 935(2021).
[75] W WANG, D YAO, H LIANG et al. Improved thermal conductivity of β-Si3N4 ceramics through the modification of the liquid phase by using GdH2 as a sintering additive. Ceramics International, 5631(2021).
[76] W WANG, D YAO, H LIANG et al. Enhanced thermal conductivity in Si3N4 ceramics prepared by using ZrH2 as an oxygen getter. Journal of Alloys and Compounds, 855: 157451(2021).
[77] W D WANG, H B CHEN, S S LI et al. Preparation of silicon nitride with high thermal conductivity and high flexural strength using YbH2-MgO as sintering additive. Journal of Inorganic Materials, 959(2021).
[78] M HUANG, Y HUANG, J OU et al. Effect of a new nonoxide additive Y3Si2C2 on the thermal conductivity and mechanical properties of Si3N4 ceramics. International Journal of Applied Ceramic Technology, 3403(2022).
[79] S FU, Z C YANG, H H LI et al. Mechanical properties and thermal conductivity of Si3N4 ceramics with composite sintering additives. Journal of Inorganic Materials, 947(2022).
[80] S FU, Z YANG, H LI et al. Effects of Gd2O3 and MgSiN2 sintering additives on the thermal conductivity and mechanical properties of Si3N4 ceramics. International Journal of Applied Ceramic Technology, 1855(2023).
[81] N UCHIDA, M KOIZUMI, M SHIMADA. Fabrication of Si3N4 ceramics with metal nitride additives by isostatic hot-pressing. Journal of the American Ceramic Society(1985).
[82] O ABE. Sintering of silicon-nitride with alkaline-earth nitrides. Ceramics International, 53(1990).
[83] G H PENG, G J JIANG, H R ZHUANG et al. A novel route for preparing MgSiN2 powder by combustion synthesis. Materials Science and Engineering: A, 65(2005).
[85] J H YANG, J F QIU, J T LI. Preparation of single-phase magnesium silicon nitride powder by a two-step process. Ceramics International, 673(2011).
[86] Y NAKASHIMA, Y OZEKI, Y ZHOU et al. Synthesis of MgSiN2 under 0.1 MPa of nitrogen pressure via combustion. Ceramics International, 31383(2021).
[87] W WANG, D YAO, H LIANG et al. Improved thermal conductivity of β‐Si3N4 ceramics by lowering SiO2/Y2O3 ratio using YH2 as sintering additive. Journal of the American Ceramic Society, 5567(2020).
[88] S LIAO, L ZHOU, C JIANG et al. Thermal conductivity and mechanical properties of Si3N4 ceramics with binary fluoride sintering additives. Journal of the European Ceramic Society, 6971(2021).
[89] S LIAO, Y ZHUANG, J WANG et al. Synergistic effect of binary fluoride sintering additives on the properties of silicon nitride ceramics. Ceramics International, 21832(2022).
[90] K KUMAR, Y J PARK, M J KIM et al. Influence of ternary oxide additives on thermal conductivity of pressureless sintered Si3N4. Materials Letters, 328: 133189(2022).
[91] W M GUO, L X WU, T MA et al. Rapid fabrication of Si3N4 ceramics by reaction-bonding and pressureless sintering. Journal of the European Ceramic Society, 3919(2016).
[92] W LI, Y WU, R HUANG et al. Effect of Si addition on the mechanical and thermal properties of sintered reaction bonded silicon nitride. Journal of the European Ceramic Society, 4491(2017).
[93] Y ZHOU, H HYUGA, D KUSANO et al. Development of high-thermal-conductivity silicon nitride ceramics. Journal of Asian Ceramic Societies, 221(2015).
[94] Y NAKASHIMA, Y ZHOU, K TANABE et al. Effects of nitridation temperature on properties of sintered reaction‐bonded silicon nitride. International Journal of Applied Ceramic Technology, 1071(2023).
[95] X ZHU, Y SAKKA, Y ZHOU et al. The effect of embedding conditions on the thermal conductivity of β-Si3N4. Journal of the Ceramic Society of Japan, 1093(2006).
[96] F HU, T ZHU, Z XIE et al. Elimination of grain boundaries and its effect on the properties of silicon nitride ceramics. Ceramics International, 12606(2020).
[97] J HU, B ZHANG, C LI et al. Fabrication of Si3N4 ceramics with high thermal conductivity and flexural strength via novel two-step gas-pressure sintering. Journal of the European Ceramic Society, 4846(2022).
[98] X ZHU, H HAYASHI, Y ZHOU et al. Influence of additive composition on thermal and mechanical properties of β-Si3N4ceramics. Journal of Materials Research, 3270(2004).
[99] X ZHU, Y SAKKA, Y ZHOU et al. Processing and properties of sintered reaction-bonded silicon nitride with Y2O3-MgSiN2: effects of Si powder and Li2O addition. Acta Materialia, 5581(2007).
[100] D KUSANO, S ADACHI, G TANABE et al. Effects of impurity oxygen content in raw Si powder on thermal and mechanical properties of sintered reaction-bonded silicon nitrides. International Journal of Applied Ceramic Technology, 229(2012).
[101] D KUSANO, H HYUGA, Y ZHOU et al. Effect of aluminum content on mechanical properties and thermal conductivities of sintered reaction-bonded silicon nitride. International Journal of Applied Ceramic Technology, 534(2014).
[102] S LI, H CHEN, W WANG et al. Effects of Y2O3/MgO ratio on mechanical properties and thermal conductivity of silicon nitride ceramics. International Journal of Applied Ceramic Technology, 2873(2022).
[103] S LI, Y XIA, D YAO et al. Enhanced thermal conductivity and flexural strength of sintered reaction-bonded silicon nitride with addition of (Y0.96Eu0.04)2O3. International Journal of Applied Ceramic Technology, 465(2023).
[104] Y DUAN, J ZHANG, X LI et al. Low temperature pressureless sintering of silicon nitride ceramics for circuit substrates in powder electronic devices. Ceramics International, 4375(2018).
[105] W LIU, W TONG, X LU et al. Effects of different types of rare earth oxide additives on the properties of silicon nitride ceramic substrates. Ceramics International, 12436(2019).
[107] L YANG, A DITTA, B FENG et al. Study of the comparative effect of sintering methods and sintering additives on the microstructure and performance of Si3N4 ceramic. Materials, 2142(2019).
[108] J ZHANG, W CUI, F LI et al. Effects of MgSiN2 addition and post-annealing on mechanical and thermal properties of Si3N4 ceramics. Ceramics International, 15719(2020).
[109] Y DUAN, N LIU, J ZHANG et al. Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties. Journal of the European Ceramic Society, 298(2020).
[110] H M OH, H K LEE. Controlling the width of particle size distribution of Si powder and properties of sintered reaction- bonded silicon nitride (SRBSN) ceramics with high thermal conductivity. Ceramics International, 12517(2020).
[111] C YE, Y LIU, C WANG et al. Investigation on thermal conductivity and mechanical properties of Si3N4 ceramics via one-step sintering. Ceramics International, 33353(2021).
[112] F HU, T ZHU, Z XIE et al. Effect of composite sintering additives containing non-oxide on mechanical, thermal and dielectric properties of silicon nitride ceramics substrate. Ceramics International, 13635(2021).
[113] H S DOW, M NA, Y W JUNG et al. Effect of oxygen impurity on thermal conduction rate of polycrystalline Si3N4. Advanced Engineering Materials, 2170037(2021).
[114] C JIANG, Y ZHUANG, J WANG et al. Preparation, microstructure, and properties of GPS silicon nitride ceramics with β-Si3N4 seeds and nanophase additives. International Journal of Applied Ceramic Technology, 2533(2022).
[115] Y WANG, J TIAN, H WU et al. Thermal and mechanical properties of Si3N4 ceramics obtained via two-step sintering. Ceramics International, 18294(2022).
[116] H IMAMURA, T KAWATA, S HONDA et al. A facile method to produce rodlike β-Si3N4 seed crystallites for bimodal structure controlling. Journal of the American Ceramic Society, 1694(2023).
[117] Y NAKASHIMA, Y ZHOU, K TANABE et al. Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics. Journal of the American Ceramic Society, 1139(2023).
[118] H MIYAZAKI, Y ZHOU, S IWAKIRI et al. Improved resistance to thermal fatigue of active metal brazing substrates for silicon carbide power modules using tough silicon nitrides with high thermal conductivity. Ceramics International, 8870(2018).
[119] Y ZHOU, T OHJI, H HYUGA et al. Fracture resistance behavior of high-thermal-conductivity silicon nitride ceramics. International Journal of Applied Ceramic Technology, 872(2014).
[120] H MIYAZAKI, Y I YOSHIZAWA, K HIRAO et al. Evaluation of fracture toughness of ceramic thin plates through modified single edge-precracked plate method. Scripta Materialia, 103: 34(2015).
