[1] Charles S Montross, Tao Wei, Lin Ye, et al.. Laser shock processing and its effects on microstructure and properties of metal alloys: a review[J]. International J Fatigue, 2002, 24(10): 1021-1036.
[2] Jon E Rankin, Michael R Hill, Lioyd A Hackel. The effects of process variations on residual stress in laser peened 7049 T73 aluminum alloy[J]. Mater Sci Eng A, 2003, 349(1-2): 279-291.
[3] Zhou Jianzhong, Xu Zengchuang, Huang Shu, et al.. Effects of different stress ratios on fatigue crack growth in laser shot peened 6061-T6 aluminum alloy[J]. Chinese J Lasers, 2011, 38(9): 0903006.
[4] A W Warren, Y B Guo, S C Chen. Massive parallel laser shock peening: simulation, analysis, and validation[J]. International J Fatigue, 2008, 30(1): 188-197.
[5] Lu Jinzhong, Luo Kaiyu, Zhang Yongkang, et al.. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts[J]. Acta Materialia, 2010, 58(11): 3984-3994.
[6] Kiyotaka Masaki, Yasuo Ochi, Takashi Matsumura. Effects of laser peening treatment on high cycle fatigue properties of degassing-processed cast aluminum alloy[J]. Mater Sci Eng A, 2007, 468-470: 171-175.
[7] Hu Yonghui, Wu Yunxin, Chen Lei. Relaxation rule of residual stress on peening surface of 7075 aluminum alloy during fatigue[J]. Materials Research and Application, 2010, 4(3): 174-179.
[8] Hu Yonghui, Li Yihua. Experiment of residual stres relaxation of 7075 aluminum alloy[J]. Materials Research and Application, 2011, 5(2): 114-116.
[9] Hu Yonghui, Wu Yunxin, Guo Junkang. Relaxation rule of residual stress on shot peening surface of 7075 aluminum alloy during fatigue[J]. Material & Heat Treatment, 2010, 39(18): 24-27.
[10] P Juijerm, I Altenberger, B Scholtes. Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA6110[J]. Mater Sci Eng A, 2006, 426(1-2): 4-10.
[11] P Juijerm, I Altenberger. Effect of temperature on cyclic deformation behavior and residual stress relaxation of deep rolled under-aged aluminium alloy AA6110[J]. Mater Sci Eng A, 2007, 452-453: 475-482.
[12] P Juijerm, I Altenberger. Fatigue behavior of deep rolled Al-Mg-Si-Cu alloy at elevated temperature[J]. Scripta Materialia, 2006, 55(10): 943-946.
[13] K Dalaei, B Karlsson. Influence of shot peening on fatigue durability of normalized steel subjected to variable amplitude loading[J]. International J Fatigue, 2012, 38: 75-83.
[14] R K Nalla, I Altenberger, U Noster, et al.. On the influence of mechanical surface treatments-deep rolling and laser shock peening-on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures[J]. Mater Sci Eng A, 2003, 355(1-2): 216-230.
[15] Igor Altenberger, Ravi K Nalla, Yuji Sano, et al.. On the effect of deep-rolling and laser-peening on the stresscontrolled low-and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 ℃ [J]. International J Fatigue, 2012, 44: 292-302.
[16] I Nikitin, B Scholtes, H J Maier, et al.. High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304[J]. Scripta Materialia, 2004, 50(10): 1345-1350.
[17] Zuo Lidang. Research on Fatigue Crack Growth Property of Ti-6Al-4V Aerospace Titanium Alloy[D]. Zhenjiang: Jiangsu University, 2013. 21.
[18] Wyman Z, Zhuang, Gary R. Halford.Investigation of residual stress relaxation under cyclic load[J]. International J Fatigue, 2001, 23: S31-S34.
