Journals >Chinese Journal of Lasers
Contents
1980
Volume: 7 Issue 7
18 Article(s)
Export citation format
Research Article
Laser Devices and Laser Physics
2 kW transverse-flow closed-cycle CO2 laser
【Author】 Wang Zheen, Su Baorong, Hu Shaoyi, Chen Kexin, Wu Donglai, Xi Quanxin, Cui Jinsi, Yu Zhijiang, and Cheng Zhaogu
The combination of a closed-cycle,transverse-flow 2KW CW CO2 laser is described with emphasis on the arcless elecrode construction and glow discharge characteristics.By means of a multi-pin trigger,the glow discharge stability is appreciably increased at more intense input current. The direct current output characterisThe combination of a closed-cycle,transverse-flow 2KW CW CO2 laser is described with emphasis on the arcless elecrode construction and glow discharge characteristics.By means of a multi-pin trigger,the glow discharge stability is appreciably increased at more intense input current. The direct current output characteristics of the main supply and the selection of the ballast resistor greatly affect the glow discharge stability and the output power. When the gas flow velocity in the discharge region is 40 m/s,the gas mixture pressure is 46 mmHg,the length of active region is 86 cm,a CW multimode output power of more than 2 KW and an electro-optic efficiency of about 15% are achieved..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 1 (1980)
Constitutional supercooling and segregation of solute in the growth of Nd:YAG crystals
Yao Guangtao
Many defects in Nd:YAG crystals grown with Czechratski method are caused by constitutional supercooling and segregation of local solute appearing in the boundary layer near the grown interface.Theseare analyzed and effective measures are proposed to eliminate conditions for constitutional supercooling and solute segregMany defects in Nd:YAG crystals grown with Czechratski method are caused by constitutional supercooling and segregation of local solute appearing in the boundary layer near the grown interface.Theseare analyzed and effective measures are proposed to eliminate conditions for constitutional supercooling and solute segregation..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 5 (1980)
Voltage-current characteristics of GaAs-AlxGa1-xAs As double heterojunction lasers
Yu Lisheng
Voltage-current characteristics of GaAs-AlαGa1-αAs DH laser diodes have been measured at different temperatures in the range of 77-300K.Typical characteristics in the forward bias of many investigated diodes can be described by: I=I1+I2=1-s1,exp（AV）+Iexp（（p/nkT）V） where A and n are parameters Weakly dependent on temperVoltage-current characteristics of GaAs-AlαGa1-αAs DH laser diodes have been measured at different temperatures in the range of 77-300K.Typical characteristics in the forward bias of many investigated diodes can be described by: I=I1+I2=1-s1,exp（AV）+Iexp（（p/nkT）V） where A and n are parameters Weakly dependent on temperature..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 9 (1980)
Pentamethylidyne dye for mode-locking in Nd3+ lasers
Xie Zhiming, Chen Shaohe, Chen Lanrong, and Yang Sheshui
Physical,chemical and mode-locking properties of pentamethylidyne dye for mode-locking in Nd3+ lasers are given.Several factors which affect the stability of the dye solution with 1,2-dichloroethane as solvent have been found.A method for increasing the stability of the dye solution is presented.Pentamethylidyne dye isPhysical,chemical and mode-locking properties of pentamethylidyne dye for mode-locking in Nd3+ lasers are given.Several factors which affect the stability of the dye solution with 1,2-dichloroethane as solvent have been found.A method for increasing the stability of the dye solution is presented.Pentamethylidyne dye is proved to be a good and inexpensive dye for mode- locking as comparedwith undecamethylidyne..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 13 (1980)
Compensation of laser beam wave surface aberration
Chen Shisheng, Zhao Qingchun, Wang Xiaoqin, and Ding Liming
Methods for compensating the wave aberration for the high power Nd glass laser beam are summarized,and the methods for adjusting,machining and testing of the aspherical lens for compensation are also given.In the experiments of laser beam aberration compensation,the practical laser beam aberration is decreased from 2.3Methods for compensating the wave aberration for the high power Nd glass laser beam are summarized,and the methods for adjusting,machining and testing of the aspherical lens for compensation are also given.In the experiments of laser beam aberration compensation,the practical laser beam aberration is decreased from 2.3λ to λ/2～λ/4..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 17 (1980)
Technique for indium sealing by rubbing coating
Wang Shiming
The technique for indium sealing by rubbing coating is described.He-Ne laser tubes,standard pulsed xenon lamps thus sealed and the fusion technique of glass with copper,glass with stainless steel,quartz with aluminum is reported.The technique for indium sealing by rubbing coating is described.He-Ne laser tubes,standard pulsed xenon lamps thus sealed and the fusion technique of glass with copper,glass with stainless steel,quartz with aluminum is reported..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 21 (1980)
Characteristics of light transmission of the optical fiber with tapered input and output ends
Cheng Zhuxinong
The relationship between divergent angle and structure of the optical fiber with tapered endsfor light transmission is discussed.It is shown that the diverging characteristics for the outputlight are only related to the structure of the output end,and a small divergent angle can be obtainedwith ends of longer length anThe relationship between divergent angle and structure of the optical fiber with tapered endsfor light transmission is discussed.It is shown that the diverging characteristics for the outputlight are only related to the structure of the output end,and a small divergent angle can be obtainedwith ends of longer length and smaller conical angle.The input end acts as a mode filter whichmakes the divergent angle for the optical fiber independent of the divergent angle for the inputbeam.This featurc is explained by the theory of geometric optics..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 23 (1980)
High speed pyroelectric detectors
Feng Xiqi, Shao Lixun, and Zhang Tianli
In this paper,the design and fabrication of high speed pyroelectric detectors made from LiNbO3 and LiTaO3 crystals,are described,including calculation and measurement of detectors responsivities and comparison on laser damage threshold of 4 kinds of material in common use; the generation mechanism of pyroelectric resonIn this paper,the design and fabrication of high speed pyroelectric detectors made from LiNbO3 and LiTaO3 crystals,are described,including calculation and measurement of detectors responsivities and comparison on laser damage threshold of 4 kinds of material in common use; the generation mechanism of pyroelectric resonance and its elimination are discussed..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 28 (1980)
Seperation of photoelastic fringes and measurement of internal spatial stresses
Wang Runwen
A brief review is given on the analysis of photoelastic stress including interferometric and holographic methods.It is pointed out that the successful seperation of isochromic fringes from isopachic ones by using photoelastic method is an experimental breakthrough.A new method is proposed for seperating the isochromic A brief review is given on the analysis of photoelastic stress including interferometric and holographic methods.It is pointed out that the successful seperation of isochromic fringes from isopachic ones by using photoelastic method is an experimental breakthrough.A new method is proposed for seperating the isochromic fringes from the isopachic fringes by optical information processing..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 34 (1980)
Contrast of photoelectric output signal and its relationship to the error of counting pulse interval in laser interferometry
Shan Guying
The importance of choosing the ratio of the width of light transmitting slit to that of interference fringes is dealt with.It is also pointed out that the largest signal contrast and the largest signal amplitude can be obtained when the width of interference fringes approaches infinite.Besides,a relation between the siThe importance of choosing the ratio of the width of light transmitting slit to that of interference fringes is dealt with.It is also pointed out that the largest signal contrast and the largest signal amplitude can be obtained when the width of interference fringes approaches infinite.Besides,a relation between the signal contrast,the signal D.C.shift and the error of counting pulse interval is given Accordingly,the quality requirments for photoelectric output signals can be determined through the tolerance of counting pulse interval..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 38 (1980)
Laser shearing interferometer with two plates
Liang Xiangchun, Jiang Yuzu, Tang Baozheng, and Si Aying
Operation principles are analyzed for a transversly shearing interferometer with two plane plates and with laser as the light source,parameter selection for the interferometer are given.The interferometer was used in measuring the laser beam wavefront.Operation principles are analyzed for a transversly shearing interferometer with two plane plates and with laser as the light source,parameter selection for the interferometer are given.The interferometer was used in measuring the laser beam wavefront..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 41 (1980)
Holography with a multimode laser
Huang Yihe
A simple method is proposed to eliminate multimode interference fringesin holographic reconstruction without at the same time cansiug restriction on the stereoscopic feeling reconstructed images.A simple method is proposed to eliminate multimode interference fringesin holographic reconstruction without at the same time cansiug restriction on the stereoscopic feeling reconstructed images..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 46 (1980)
Two problems about the power supply for high repetition rate solid state lasers
Huang Maoquan, and Li Hong
Two difficulties that arise in controlling the charging voltage and in preventing the faultily conducting phenomenon in a resonance charging repetition rate solid state laser power supply are discussed and effective methods for suppressing them are proposed.Two difficulties that arise in controlling the charging voltage and in preventing the faultily conducting phenomenon in a resonance charging repetition rate solid state laser power supply are discussed and effective methods for suppressing them are proposed..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 48 (1980)
Non-contact high-voltage measurement with laser beam
Zhao Kun, Yi Xiaozhu, Wang Ruhou, Wang Peilin, and Wang Hongzheng
An experiment of transverse modalation at voltage 150kV,50Hz is presented,with a He-Ne laser as the light source and an electro-optic crystal LiNbO3 as the Pockels’cell.Its maximum relative error nmax=7.7%,average relative error n≤2.0%.An experiment of transverse modalation at voltage 150kV,50Hz is presented,with a He-Ne laser as the light source and an electro-optic crystal LiNbO3 as the Pockels’cell.Its maximum relative error nmax=7.7%,average relative error n≤2.0%..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 51 (1980)
Protective film in laser thin film
Jin Linfa
Using SiO2 as protective film laser thin film can raise the laser-resistant intensity by 1～2 fold.It is elucidated from both the plasma flash and the damage of thin film flaws.Using SiO2 as protective film laser thin film can raise the laser-resistant intensity by 1～2 fold.It is elucidated from both the plasma flash and the damage of thin film flaws..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 56 (1980)
An automatic measurement device for weak laser energy
Lin Wenqing, Li Jingxian, Chen Wenzhou, and Huang Guanlong
The configuration,parameters,behaviour and error analysis of an automatic measurement device for weak laser energy are reported.The measured energy of laser pulses ranges from 50 mj to 0.2 mj with an accuracy better than 10%.The configuration,parameters,behaviour and error analysis of an automatic measurement device for weak laser energy are reported.The measured energy of laser pulses ranges from 50 mj to 0.2 mj with an accuracy better than 10%..
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 60 (1980)
[in Chinese]
[in Chinese]
Chinese Journal of Lasers
- Publication Date: Jan. 01, 1900
- Vol. 7, Issue 7, 62 (1980)
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20